Feedback 2.0 Alpha 3

Fragen zur Nutzung, Features, usw..
Gesperrt
rleidner
Beiträge: 958
Registriert: Mo Nov 02, 2020 9:50 am
Has thanked: 5 times
Been thanked: 14 times

Re: Feedback 2.0 Alpha 3

Beitrag von rleidner »

okaegi hat geschrieben: ↑So Okt 02, 2022 10:19 am In der 1.9 wurden usprünglich die Zählerstände zusätzlich in monthly... Verzeichniss gesichert. Seid längerem werden diese aber im Gui ingoriert und neue monthly Summen basierend auf dem bereinigten Daily gerechnet (Verzeichniss v001).
Welche vergleichst du ?
Gruss Oliver
Ich sehe auf die Monatsauswertungen in der GUI.
In 1.9 zeigen die Monatsansicht und Monatsansicht Aufteilung dieselben Werte:
202209-1.9.JPG
202209-1.9-Aufteilung.JPG
In 2.0 die abweichenden Werte:
202209-2.0.JPG
Wie bereits oben beschrieben, kann ich z.B. den Bezug der 1.9 von ca. 226 kWh auch in den Daten der 2.0 nachvollziehen.
Daher nehme ich an, dass die Abweichung im vue-GUI der 2.0 passiert.
openWB-2 Standard+ | openWB EVU Kit v2 MID| 9,9kWp mit Kostal Plenticore 8.5 plus | VW ID.3, Kia EV6, Smart EQ forfour
Nach oben
Benutzeravatar
mrinas
Beiträge: 2148
Registriert: Mi Jan 29, 2020 10:12 pm
Has thanked: 8 times
Been thanked: 6 times

Re: 1p/3p Umschaltung, diesmal Sofortladen

Beitrag von mrinas »

mrinas hat geschrieben: ↑Di Sep 27, 2022 8:26 am Hi Lena,

leider hab' ich noch Probleme mit der 1p/3p Umschaltung, diesmal Sofortladen. Sofortladen steht auf Maximum, eben von PV auf Sofort umgeschaltet und auch den LP entsperrt, dennoch wird nur mit 1p geladen.

Code: Alles auswählen

2022-09-27 10:24:15,801 - {root:71} - INFO - # ***Start*** 
2022-09-27 10:24:15,852 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['Ladepunkt']
2022-09-27 10:24:15,854 - {modules.sma_shm.device:50} - DEBUG - Beginning update
2022-09-27 10:24:15,855 - {modules.json.device:57} - DEBUG - Start device reading {'component14': <modules.json.counter.JsonCounter object at 0x73dd0a48>}
2022-09-27 10:24:15,855 - {soc.modules.common.component_context:51} - DEBUG - Update Komponenten ['EnergyMeter 1.0']
2022-09-27 10:24:15,856 - {modules.json.device:57} - DEBUG - Start device reading {'component15': <modules.json.counter.JsonCounter object at 0x73dd0820>}
2022-09-27 10:24:15,857 - {modules.http.device:57} - DEBUG - Start device reading {'component21': <modules.http.counter.HttpCounter object at 0x73dd0418>}
2022-09-27 10:24:15,858 - {soc.modules.common.component_context:51} - DEBUG - Update Komponenten ['Pumpe']
2022-09-27 10:24:15,860 - {modules.sma_sunny_boy.device:72} - DEBUG - Start device reading {'component22': <modules.sma_sunny_boy.inverter.SmaSunnyBoyInverter object at 0x73dcb928>}
2022-09-27 10:24:15,862 - {soc.modules.common.component_context:51} - DEBUG - Update Komponenten ['Trockner']
2022-09-27 10:24:15,863 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['LP1 (Garage)']
2022-09-27 10:24:15,870 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.81:80
2022-09-27 10:24:15,871 - {modules.sma_sunny_boy.device:72} - DEBUG - Start device reading {'component23': <modules.sma_sunny_boy.inverter.SmaSunnyBoyInverter object at 0x73dcbcb8>}
2022-09-27 10:24:15,881 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.209:80
2022-09-27 10:24:15,889 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.51:80
2022-09-27 10:24:15,895 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['WR Haus (neu)']
2022-09-27 10:24:15,900 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['WR Garage (neu)']
2022-09-27 10:24:15,904 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.51:80 "GET /openWB/ramdisk/llkwh HTTP/1.1" 200 8
2022-09-27 10:24:15,906 - {soc.modules.common.req:11} - DEBUG - Get-Response: 5193.179
2022-09-27 10:24:15,907 - {modules.http.api:16} - DEBUG - Antwort auf http://192.168.178.51/openWB/ramdisk/llkwh 5193.179
2022-09-27 10:24:15,910 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.81:80 "GET /meter/0 HTTP/1.1" 200 119
2022-09-27 10:24:15,918 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.51:80
2022-09-27 10:24:15,921 - {soc.modules.common.req:11} - DEBUG - Get-Response: {"power":1.08,"overpower":0.00,"is_valid":true,"timestamp":1664274256,"counters":[1.075, 1.074, 1.096],"total":5017631}
2022-09-27 10:24:16,365 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['EnergyMeter 1.0']
2022-09-27 10:24:16,366 - {soc.modules.common.store._api:20} - DEBUG - Saving CounterState(voltages=[228.439, 224.653, 227.739], powers=[-370.6, 3482.1, 196.3], currents=[-1.649, 15.559, 1.08], power_factors=[0.994, 1.0, 0.907], imported=33342123.200000003, exported=73657843.5, power=3307.8, frequency=50)
2022-09-27 10:24:16,369 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.51:80 "GET /openWB/ramdisk/llaktuell HTTP/1.1" 200 1
2022-09-27 10:24:16,371 - {soc.modules.common.req:11} - DEBUG - Get-Response: 0
2022-09-27 10:24:16,372 - {modules.http.api:16} - DEBUG - Antwort auf http://192.168.178.51/openWB/ramdisk/llaktuell 0
2022-09-27 10:24:16,378 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.51:80
2022-09-27 10:24:16,381 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.209:80 "GET /meter/0 HTTP/1.1" 200 87
2022-09-27 10:24:16,384 - {soc.modules.common.req:11} - DEBUG - Get-Response: {"power":0.00,"is_valid":true,"timestamp":0,"counters":[0.000, 0.000, 0.000],"total":0}
2022-09-27 10:24:16,790 - {modules.common.simcount._simcount:275} - DEBUG - Fortsetzen der Simulation: Importzähler: 227800034Ws, Export-Zähler: 0Ws
2022-09-27 10:24:16,791 - {modules.sma_shm.device:67} - DEBUG - All components updated
2022-09-27 10:24:16,798 - {modules.sma_shm.device:58} - DEBUG - Update complete
2022-09-27 10:24:16,799 - {modules.common.simcount._calculate:13} - DEBUG - time passed: 8.74635, power1: 0, power2: 0
2022-09-27 10:24:16,802 - {modules.common.simcount._calculate:29} - DEBUG - power did not change sign. Total energy: 0
2022-09-27 10:24:16,802 - {modules.common.simcount._simcount:295} - DEBUG - simcount aufsummierte Energie: Bezug[Ws]: 227800034.0, Einspeisung[Ws]: 0
2022-09-27 10:24:16,802 - {modules.common.simcount._simcount:302} - INFO - simcount Ergebnis: Bezug[Wh]: 63277.78722222222, Einspeisung[Wh]: 0.0
2022-09-27 10:24:16,803 - {modules.common.simcount._simcount:306} - DEBUG - simcount Zwischenergebnisse aktuelle Berechnung: Import: 227800034.0 Export: 0 Power: 0
2022-09-27 10:24:16,805 - {modules.common.simcount._simcount:275} - DEBUG - Fortsetzen der Simulation: Importzähler: 195788363Ws, Export-Zähler: 0Ws
2022-09-27 10:24:16,806 - {modules.common.simcount._calculate:13} - DEBUG - time passed: 9.2046, power1: 1, power2: 1.08
2022-09-27 10:24:16,806 - {modules.common.simcount._calculate:29} - DEBUG - power did not change sign. Total energy: 9.57279
2022-09-27 10:24:16,807 - {modules.common.simcount._simcount:295} - DEBUG - simcount aufsummierte Energie: Bezug[Ws]: 195788372.57278806, Einspeisung[Ws]: 0
2022-09-27 10:24:16,807 - {modules.common.simcount._simcount:302} - INFO - simcount Ergebnis: Bezug[Wh]: 54385.65904799668, Einspeisung[Wh]: 0.0
2022-09-27 10:24:16,807 - {modules.common.simcount._simcount:306} - DEBUG - simcount Zwischenergebnisse aktuelle Berechnung: Import: 195788372.57278806 Export: 0 Power: 1.08
2022-09-27 10:24:16,809 - {soc.modules.common.store._api:20} - DEBUG - Saving CounterState(voltages=[230.0, 230.0, 230.0], powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], power_factors=[0.0, 0.0, 0.0], imported=54385.65904799668, exported=0.0, power=1.08, frequency=50)
2022-09-27 10:24:16,811 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.51:80 "GET /openWB/ramdisk/lla1 HTTP/1.1" 200 3
2022-09-27 10:24:16,815 - {soc.modules.common.req:11} - DEBUG - Get-Response: 0.0
2022-09-27 10:24:16,815 - {modules.http.api:16} - DEBUG - Antwort auf http://192.168.178.51/openWB/ramdisk/lla1 0.0
2022-09-27 10:24:16,822 - {modules.sma_sunny_boy.inverter:62} - DEBUG - WR 192.168.178.204: InverterState(currents=[0.0, 0.0, 0.0], power=-344, exported=2111580), DC Power True
2022-09-27 10:24:16,826 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.51:80
2022-09-27 10:24:16,828 - {soc.modules.common.store._api:20} - DEBUG - Saving CounterState(voltages=[230.0, 230.0, 230.0], powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], power_factors=[0.0, 0.0, 0.0], imported=63277.78722222222, exported=0.0, power=0, frequency=50)
2022-09-27 10:24:16,831 - {soc.modules.common.store._api:20} - DEBUG - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-344, exported=2111580)
2022-09-27 10:24:16,848 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.51:80 "GET /openWB/ramdisk/lla2 HTTP/1.1" 200 3
2022-09-27 10:24:16,849 - {soc.modules.common.req:11} - DEBUG - Get-Response: 0.0
2022-09-27 10:24:16,851 - {modules.http.api:16} - DEBUG - Antwort auf http://192.168.178.51/openWB/ramdisk/lla2 0.0
2022-09-27 10:24:16,856 - {urllib3.connectionpool:227} - DEBUG - Starting new HTTP connection (1): 192.168.178.51:80
2022-09-27 10:24:16,864 - {urllib3.connectionpool:452} - DEBUG - http://192.168.178.51:80 "GET /openWB/ramdisk/lla3 HTTP/1.1" 200 3
2022-09-27 10:24:16,865 - {soc.modules.common.req:11} - DEBUG - Get-Response: 0.0
2022-09-27 10:24:16,866 - {modules.http.api:16} - DEBUG - Antwort auf http://192.168.178.51/openWB/ramdisk/lla3 0.0
2022-09-27 10:24:16,868 - {soc.modules.common.store._api:20} - DEBUG - Saving CounterState(voltages=[230.0, 230.0, 230.0], powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], power_factors=[0.0, 0.0, 0.0], imported=5193.179, exported=0, power=0.0, frequency=50)
2022-09-27 10:24:16,888 - {modules.sma_sunny_boy.inverter:62} - DEBUG - WR 192.168.178.201: InverterState(currents=[0.0, 0.0, 0.0], power=-417, exported=40520515), DC Power True
2022-09-27 10:24:16,889 - {soc.modules.common.store._api:20} - DEBUG - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-417, exported=40520515)
2022-09-27 10:24:17,106 - {control.counter:411} - DEBUG - 20692.2W EVU-Leistung, die noch bezogen werden kann.
2022-09-27 10:24:17,109 - {control.ev:621} - DEBUG - Keine Ladung, da kein Zeitfenster für Zeitladen aktiv ist.
2022-09-27 10:24:17,110 - {control.chargepoint:681} - DEBUG - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3
2022-09-27 10:24:17,112 - {control.ev:404} - DEBUG - Änderung der Sollstromstärke :False, Änderung des Lademodus :False
2022-09-27 10:24:17,114 - {control.chargepoint:853} - DEBUG - LP 13, EV: Tesla (EV-Nr.3): Theoretisch benötigter Strom 16A, Lademodus instant_charging, Submodus: instant_charging, Phasen: 3, Priorität: False, max. Ist-Strom: 16.2
2022-09-27 10:24:17,117 - {control.pv:89} - DEBUG - -3422.8W EVU-Überschuss, der für die Regelung verfügbar ist, davon 0W für die Einschaltverzögerung reservierte Leistung.
2022-09-27 10:24:17,121 - {control.data:294} - DEBUG - all
{'get': {'power': 0}, 'config': {'configured': False}, 'set': {'charging_power_left': 0, 'switch_on_soc_reached': False}}
2022-09-27 10:24:17,122 - {control.data:267} - DEBUG - cp_all_data
AllChargepointData(get=AllGet(daily_imported=18.0, daily_exported=0, power=3567, imported=3269317.0, exported=0))
2022-09-27 10:24:17,123 - {control.data:294} - DEBUG - cp13
ChargepointData(get=Get(charge_state=True, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=11.0), currents=[16.2, 0.1, 0.1], daily_imported=18.0, daily_exported=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=3269317.0, phases_in_use=1, plug_state=True, power=3567, rfid_timestamp=None, rfid=None, state_str=None, voltages=[220.8, 228.8, 230.0]), set=Set(autolock_state=0, change_ev_permitted=[True, ''], charging_ev=3, charging_ev_prev=-1, current=16, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='instant_charging', imported_at_mode_switch=3269283.0, imported_at_plugtime=3269283.0, imported_since_mode_switch=27.0, imported_since_plugged=27.0, range_charged=0.135, time_charged='0:01', timestamp_start_charging='09/27/2022, 10:23:39'), manual_lock=False, phases_to_use=3, plug_time='09/24/2022, 16:00:27', required_power=11040, rfid=None, charging_ev_data=<control.ev.Ev object at 0x71f9d6a0>), config=Config(connection_module={'type': 'external_openwb', 'configuration': {'ip_address': '192.168.178.210', 'duo_num': 1}}, power_module={}, ev=3, name='Gartenhaus', type='external_openwb', template=0, connected_phases=3, phase_1=2, auto_phase_switch_hw=True, control_pilot_interruption_hw=True, id=13))
2022-09-27 10:24:17,124 - {control.data:294} - DEBUG - cpt0
{'name': 'Standard Ladepunkt-Vorlage', 'autolock': {'wait_for_charging_end': False, 'active': False, 'plans': {}}, 'rfid_enabling': False, 'valid_tags': []}
2022-09-27 10:24:17,125 - {control.data:294} - DEBUG - all
{'set': {'loadmanagement_active': False, 'home_consumption': 500, 'invalid_home_consumption': 0, 'daily_yield_home_consumption': 3829.8}, 'get': {'hierarchy': [{'id': 7, 'type': 'counter', 'children': [{'id': 13, 'type': 'cp', 'children': []}, {'id': 14, 'type': 'counter', 'children': []}, {'id': 15, 'type': 'counter', 'children': []}, {'id': 21, 'type': 'counter', 'children': []}, {'id': 22, 'type': 'inverter', 'children': []}, {'id': 23, 'type': 'inverter', 'children': []}]}]}}
2022-09-27 10:24:17,126 - {control.data:294} - DEBUG - counter7
{'set': {'consumption_left': 20692.2, 'currents_used': [-1.65, 15.56, 1.08]}, 'get': {'daily_exported': 538.5, 'daily_imported': 2784.3, 'voltages': [228.44, 224.65, 227.74], 'currents': [-1.65, 15.56, 1.08], 'powers': [-370.6, 3482.1, 196.3], 'power_factors': [0.99, 1.0, 0.91], 'imported': 33342123.200000003, 'exported': 73657843.5, 'power': 3307.8, 'fault_str': 'Kein Fehler.', 'fault_state': 0, 'frequency': 50}, 'config': {'max_currents': [35, 35, 35], 'max_total_power': 24000}}
2022-09-27 10:24:17,126 - {control.data:294} - DEBUG - counter14
{'set': {'currents_used': [0.0, 0.0, 0.0]}, 'get': {'daily_exported': 0.0, 'daily_imported': 9.450841071786, 'fault_str': 'Kein Fehler.', 'fault_state': 0, 'voltages': [230.0, 230.0, 230.0], 'currents': [0.0, 0.0, 0.0], 'powers': [0.0, 0.0, 0.0], 'power_factors': [0.0, 0.0, 0.0], 'imported': 54385.65904799668, 'exported': 0.0, 'power': 1.08, 'frequency': 50}, 'config': {'max_currents': [16, 16, 16], 'max_total_power': 11000}}
2022-09-27 10:24:17,127 - {control.data:294} - DEBUG - counter15
{'set': {'currents_used': [0.0, 0.0, 0.0]}, 'get': {'daily_exported': 0.0, 'daily_imported': 0.0, 'fault_str': 'Kein Fehler.', 'fault_state': 0, 'voltages': [230.0, 230.0, 230.0], 'currents': [0.0, 0.0, 0.0], 'powers': [0.0, 0.0, 0.0], 'power_factors': [0.0, 0.0, 0.0], 'imported': 63277.78722222222, 'power': 0, 'frequency': 50, 'exported': 0.0}, 'config': {'max_currents': [16, 16, 16], 'max_total_power': 11000}}
2022-09-27 10:24:17,127 - {control.data:294} - DEBUG - counter21
{'set': {'currents_used': [0.0, 0.0, 0.0]}, 'get': {'daily_exported': 0, 'daily_imported': 0.118, 'voltages': [230.0, 230.0, 230.0], 'currents': [0.0, 0.0, 0.0], 'powers': [0.0, 0.0, 0.0], 'power_factors': [0.0, 0.0, 0.0], 'imported': 5193.179, 'exported': 0, 'power': 0.0, 'frequency': 50, 'fault_str': 'Kein Fehler.', 'fault_state': 0}, 'config': {'max_currents': [16, 16, 16], 'max_total_power': 11000}}
2022-09-27 10:24:17,128 - {control.data:294} - DEBUG - ct0
ChargeTemplateData(name='Standard-Ladeprofil-Vorlage', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(min_soc_current=6, min_current=0, feed_in_limit=False, min_soc=0, max_soc=100), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=16, limit=Limit(selected='none', soc=50, amount=22))))
2022-09-27 10:24:17,128 - {control.data:294} - DEBUG - ct1
ChargeTemplateData(name='Tesla', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=True, plans={'1': TimeChargingPlan(name='Urlaub', active=True, time=['05:00', '11:00'], current=16, frequency=Frequency(selected='once', once=['2022-08-07', '2022-08-07'], weekly=[False, False, False, False, False, False, False]))}), chargemode=Chargemode(selected='instant_charging', pv_charging=PvCharging(min_soc_current=6, min_current=0, feed_in_limit=False, min_soc=0, max_soc=70), scheduled_charging=ScheduledCharging(plans={'0': ScheduledChargingPlan(name='Zielladen-Standard', active=False, time='07:00', limit=Limit(selected='none', soc=50, amount=1000), frequency=Frequency(selected='daily', once=['2021-11-01', '2021-11-05'], weekly=[False, False, False, False, False, False, False]))}), instant_charging=InstantCharging(current=16, limit=Limit(selected='soc', soc=75, amount=''))))
2022-09-27 10:24:17,130 - {control.data:294} - DEBUG - ev0
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Vorlage', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17, min_current=6, max_current_one_phase=32, battery_capacity=82, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False)), et_num=0)), control_parameter=ControlParameter(required_current=0, phases=1, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='stop', chargemode='stop', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp='', force_soc_update=False, range=0))
2022-09-27 10:24:17,131 - {control.data:294} - DEBUG - ev1
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Vorlage', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17, min_current=6, max_current_one_phase=32, battery_capacity=82, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False)), et_num=0)), control_parameter=ControlParameter(required_current=0, phases=0, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='stop', chargemode='stop', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp='', force_soc_update=False, range=0))
2022-09-27 10:24:17,134 - {control.data:294} - DEBUG - ev2
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Vorlage', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17, min_current=6, max_current_one_phase=32, battery_capacity=82, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False)), et_num=0)), control_parameter=ControlParameter(required_current=0, phases=0, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='stop', chargemode='stop', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp='', force_soc_update=False, range=0))
2022-09-27 10:24:17,135 - {control.data:294} - DEBUG - ev3
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Tesla', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=20, min_current=6, max_current_one_phase=16, battery_capacity=75, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False)), et_num=0)), control_parameter=ControlParameter(required_current=16, phases=3, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='instant_charging', chargemode='instant_charging', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None), charge_template=1, ev_template=1, name='Tesla', tag_id=[], get=Get(soc=11.0, soc_timestamp='09/27/2022, 10:23:42', force_soc_update=False, range=50.0665674))
2022-09-27 10:24:17,136 - {control.data:294} - DEBUG - et0
EvTemplateData(name='Standard-Fahrzeug-Vorlage', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17, min_current=6, max_current_one_phase=32, battery_capacity=82, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False))
2022-09-27 10:24:17,136 - {control.data:294} - DEBUG - et1
EvTemplateData(name='Tesla', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=20, min_current=6, max_current_one_phase=16, battery_capacity=75, nominal_difference=2, soc=Soc(request_interval_charging=5, request_interval_not_charging=720, request_only_plugged=False))
2022-09-27 10:24:17,137 - {control.data:275} - DEBUG - general_data
GeneralData(chargemode_config=ChargemodeConfig(individual_mode=True, instant_charging=InstantCharging(phases_to_use=3), pv_charging=PvCharging(bat_prio=True, charging_power_reserve=200, control_range=[-230, 0], feed_in_yield=0, phase_switch_delay=8, phases_to_use=0, rundown_power=1000, rundown_soc=50, switch_off_delay=180, switch_off_soc=40, switch_off_threshold=350, switch_on_delay=40, switch_on_soc=60, switch_on_threshold=1300), scheduled_charging=ScheduledCharging(phases_to_use=0), standby=Standby(phases_to_use=1), stop=Stop(phases_to_use=1), time_charging=TimeCharging(phases_to_use=3), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='local', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=False, grid_protection_random_stop=0, grid_protection_timestamp='', mqtt_bridge=False, price_kwh=0.23, range_unit='km', ripple_control_receiver=RippleControlReceiver(configured=False, r1_active=False, r2_active=False))
2022-09-27 10:24:17,137 - {control.data:294} - DEBUG - graph
{'config': {'duration': 120}}
2022-09-27 10:24:17,137 - {control.data:294} - DEBUG - optional
{'et': {'get': {}, 'active': False, 'config': {'max_price': 0, 'provider': {}}}, 'int_display': {'active': False, 'on_if_plugged_in': True, 'pin_active': False, 'pin_code': '0000', 'standby': 60, 'theme': 'cards'}, 'led': {'active': False}, 'active': False, 'max_current': 16, 'rfid': {'active': False}}
2022-09-27 10:24:17,138 - {control.data:294} - DEBUG - all
{'set': {'overhang_power_left': -3422.8, 'available_power': -3422.8, 'reserved_evu_overhang': 0, 'released_evu_overhang': 0}, 'get': {'power': -761, 'exported': 42632095, 'daily_exported': 1584, 'monthly_exported': 0, 'yearly_exported': 0}, 'config': {'configured': True}}
2022-09-27 10:24:17,138 - {control.data:294} - DEBUG - pv22
{'get': {'daily_exported': 694, 'monthly_exported': 0, 'yearly_exported': 0, 'fault_str': 'Kein Fehler.', 'fault_state': 0, 'power': -344, 'exported': 2111580, 'currents': [0.0, 0.0, 0.0]}, 'config': {'max_ac_out': 0}}
2022-09-27 10:24:17,138 - {control.data:294} - DEBUG - pv23
{'get': {'daily_exported': 890, 'monthly_exported': 0, 'yearly_exported': 0, 'fault_str': 'Kein Fehler.', 'fault_state': 0, 'power': -417, 'exported': 40520515, 'currents': [0.0, 0.0, 0.0]}, 'config': {'max_ac_out': 0}}
2022-09-27 10:24:17,138 - {control.data:294} - DEBUG - system
{'update_in_progress': False, 'perform_update': False, 'boot_done': True, 'ip_address': '192.168.178.99', 'dataprotection_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'lastlivevaluesJson': {'timestamp': 1664267048, 'time': '10:24:08', 'grid': 3.314, 'counter14-power': 0.001, 'counter15-power': 0.0, 'counter21-power': 0.0, 'house-power': 0.497, 'charging-all': 3.572, 'pv-all': 0.756, 'cp13-power': 3.572}, 'version': '1.99.003', 'current_commit': '2022-09-26 14:16:59 +0200 [02559c7f]', 'current_master_commit': '2022-09-26 14:16:59 +0200 [02559c7f]', 'current_missing_commits': [], 'module_update_completed': True}
2022-09-27 10:24:17,140 - {control.data:307} - DEBUG - device4
{'name': 'EVU', 'type': 'sma_shm', 'id': 4, 'configuration': {}}
2022-09-27 10:24:17,140 - {control.data:311} - ERROR - Fehler im Data-Modul
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/control/data.py", line 309, in _print_device_config
    log.debug(f"{comp_key}\n{dataclass_utils.asdict(comp_value.component_config)}")
AttributeError: 'SpeedwireComponent' object has no attribute 'component_config'
2022-09-27 10:24:17,150 - {control.data:307} - DEBUG - device8
{'name': 'Pumpe', 'type': 'json', 'id': 8, 'configuration': {'url': 'http://192.168.178.81/meter/0'}}
2022-09-27 10:24:17,151 - {control.data:309} - DEBUG - component14
{'name': 'Pumpe', 'type': 'counter', 'id': 14, 'configuration': {'jq_power': '.power', 'jq_exported': '', 'jq_imported': ''}}
2022-09-27 10:24:17,151 - {control.data:307} - DEBUG - device9
{'name': 'Trockner', 'type': 'json', 'id': 9, 'configuration': {'url': 'http://192.168.178.209/meter/0'}}
2022-09-27 10:24:17,151 - {control.data:309} - DEBUG - component15
{'name': 'Trockner', 'type': 'counter', 'id': 15, 'configuration': {'jq_power': '.power', 'jq_exported': '', 'jq_imported': ''}}
2022-09-27 10:24:17,151 - {control.data:307} - DEBUG - device14
{'name': 'openWB (1.9)', 'type': 'http', 'id': 14, 'configuration': {'url': 'http://192.168.178.51'}}
2022-09-27 10:24:17,152 - {control.data:309} - DEBUG - component21
{'name': 'LP1 (Garage)', 'type': 'counter', 'id': 21, 'configuration': {'current_l1_path': '/openWB/ramdisk/lla1', 'current_l2_path': '/openWB/ramdisk/lla2', 'current_l3_path': '/openWB/ramdisk/lla3', 'exported_path': 'none', 'imported_path': '/openWB/ramdisk/llkwh', 'power_path': '/openWB/ramdisk/llaktuell'}}
2022-09-27 10:24:17,152 - {control.data:307} - DEBUG - device15
{'name': 'WR Garage (neu)', 'type': 'sma_sunny_boy', 'id': 15, 'configuration': {'ip_address': '192.168.178.204'}}
2022-09-27 10:24:17,152 - {control.data:309} - DEBUG - component22
{'name': 'WR Garage (neu)', 'type': 'inverter', 'id': 22, 'configuration': {'hybrid': False, 'version': 0}}
2022-09-27 10:24:17,152 - {control.data:307} - DEBUG - device16
{'name': 'WR Haus (neu)', 'type': 'sma_sunny_boy', 'id': 16, 'configuration': {'ip_address': '192.168.178.201'}}
2022-09-27 10:24:17,153 - {control.data:309} - DEBUG - component23
{'name': 'WR Haus (neu)', 'type': 'inverter', 'id': 23, 'configuration': {'hybrid': False, 'version': 0}}
2022-09-27 10:24:17,153 - {control.data:281} - DEBUG - 

2022-09-27 10:24:17,153 - {control.algorithm:44} - DEBUG - # Algorithmus-Start
2022-09-27 10:24:17,153 - {control.algorithm:46} - INFO - EVU-Punkt: Leistung[W] 3307.8, Ströme[A] [-1.65, 15.56, 1.08]
2022-09-27 10:24:17,154 - {control.algorithm:84} - INFO - ## Überschuss-Ladung über Mindeststrom bei PV-Laden zurücknehmen.
2022-09-27 10:24:17,155 - {control.algorithm:199} - DEBUG - ## Ladung muss nicht wegen aktiven Lastmanagements gestoppt werden.
2022-09-27 10:24:17,156 - {control.algorithm:563} - INFO - ## Zuteilung des Überschusses
2022-09-27 10:24:17,157 - {control.algorithm:599} - INFO - ## Zuteilung beendet, da kein Ladepunkt mehr auf Zuteilung wartet.
2022-09-27 10:24:17,157 - {control.algorithm:859} - INFO - ## Übrigen Überschuss verteilen.
2022-09-27 10:24:17,159 - {control.process:22} - DEBUG - # Ladung starten.
2022-09-27 10:24:17,160 - {control.chargelog:62} - DEBUG - imported_since_mode_switch 34.0 counter 3269317.0
2022-09-27 10:24:17,167 - {control.process:107} - INFO - LP13: set current 16 A
2022-09-27 10:24:17,171 - {soc.modules.common.component_context:24} - DEBUG - Update Komponente ['Ladepunkt']
2022-09-27 10:24:17,187 - {control.pv:433} - DEBUG - -3422.8W EVU-Überschuss, der für die Regelung verfügbar ist, davon 0W für die Einschaltverzögerung reservierte Leistung.
2022-09-27 10:24:17,188 - {control.counter:430} - DEBUG - 20692.2W verbleibende EVU-Bezugs-Leistung
2022-09-27 10:24:25,802 - {root:71} - INFO - # ***Start***
Durch die Konfigurationsänderung von Maximum auf 1, zurück auf Maximum konnte ich die Umschaltung triggern. Kann so ja aber irgendwie nicht im Sinne der Sache sein, zumal auf der Statusseite der Status korrekt angezeigt wurde (3p Vorgabe, tatsächlich 1p).
Ich hab' ein wenig den Überblick über die Änderungen & Commits der letzten Wochen verloren, wurde das schon behoben? Hatte gerade am Wochenende wieder das gleiche Problem. Wechsel von PV (automatik) auf Sofortladen (fest auf maximale Phasen konfiguriert), gab keine Umschaltung von 1p auf 3p.
15,2kWp SMA (SB4000TL-21, SB3.0, STP6.0-SE + BYD HVS, EnergyMeter), openWB Standard+, openWB Pro, Smart #1 (ersetzt den e2008), Tesla Model Y LR.
Nach oben
Brathähnchen
Beiträge: 10
Registriert: Di Okt 04, 2022 5:39 pm

Re: Feedback 2.0 Alpha 3

Beitrag von Brathähnchen »

Hallo Zusammen,

Großen Respekt und großes Lob für die starke Software die ihr da erschafft!

Wie weit ist der Fortschritt bei der openWB 2.0?
Welche Features wurden bereits umgesetzt und welche Features fehlen noch?

Ist absehbar wann die 2.0 Software für den Otto-Normal-User einsetzbar ist? (2.0 läuft direkt auf oWB, Upgrade-Knopf zu 2.0 in oWB Interface, Automatische Übernahme der Daten der oWB 1.9 in 2.0)

Ich weiß, das ungeduldige Nachfragen ohne zur 2.0 beitragen zu können ist nervig… Ich freue mich aber schon auf die neuen und verbesserten Features. Und seit der Alpha 3 Ankündigung gab es leider keine übersichtliche Feature-Liste & Roadmap mehr.
Nach oben
aiole
Beiträge: 7742
Registriert: Mo Okt 08, 2018 4:51 pm
Has thanked: 16 times
Been thanked: 31 times

Re: Feedback 2.0 Alpha 3

Beitrag von aiole »

Das update von
2022-10-04 13:04:51 +0200 [0122f0dc]
auf
2022-10-05 10:22:59 +0200 [9f94c0a7]
versagt mit folgendem Fehler:

Code: Alles auswählen

Bei der Verarbeitung des Befehls 'systemUpdate' mit den Parametern '[object Object]' ist ein Fehler aufgetreten:

Es ist ein interner Fehler aufgetreten: Traceback (most recent call last):
  File "/var/www/html/openWB/packages/helpermodules/command.py", line 106, in on_message
    func(connection_id, payload)
  File "/var/www/html/openWB/packages/helpermodules/command.py", line 538, in systemUpdate
    pub_success_user(
TypeError: pub_success_user() missing 2 required positional arguments: 'connection_id' and 'message'
Ich verliere hier auch so langsam den Überblick.
Wir bräuchten zeitnahes feedback, was von den Anpassungsvorschlägen umgesetzt wurde, noch kommt oder abgelehnt wird.
Nach oben
LutzB
Beiträge: 3779
Registriert: Di Feb 25, 2020 9:23 am
Has thanked: 4 times
Been thanked: 24 times

Re: Feedback 2.0 Alpha 3

Beitrag von LutzB »

Aus der Linux Shell bitte das Update-Skript direkt ausführen. Zu finden unter /var/www/html/openWB/runs/update-self.sh.
Nach oben
aiole
Beiträge: 7742
Registriert: Mo Okt 08, 2018 4:51 pm
Has thanked: 16 times
Been thanked: 31 times

Re: Feedback 2.0 Alpha 3

Beitrag von aiole »

LutzB hat geschrieben: ↑Fr Okt 07, 2022 4:50 pm Aus der Linux Shell bitte das Update-Skript direkt ausführen. Zu finden unter /var/www/html/openWB/runs/update-self.sh.
Danke Dir!
allerdings mit Unterstrich ;)

Code: Alles auswählen

root@openwb2-alpha3:/var/www/html/openWB/runs# ./update-self.sh
bash: ./update-self.sh: No such file or directory
root@openwb2-alpha3:/var/www/html/openWB/runs# ls
atreboot.sh  cleanup_log.sh     graphing.sh  savemqtt.php   shutdown.sh              update_available_versions.sh  update_self.sh
backup.sh    cloudRegister.php  reboot.sh    send_debug.sh  start_remote_support.sh  update_hostname.sh            upgrade2openwbuser.sh
root@openwb2-alpha3:/var/www/html/openWB/runs# ./update_self.sh
Allerdings wird danach immer noch die alte Install angezeigt: 2022-10-04 13:04:51 +0200 [0122f0dc]
und über's GUI bleibt der Fehler.
Komme lt. GUI also nicht auf 2022-10-05 10:22:59 +0200 [9f94c0a7]

Das script schien gelaufen zu sein, da ich aus der shell rausflog.
Nach oben
LutzB
Beiträge: 3779
Registriert: Di Feb 25, 2020 9:23 am
Has thanked: 4 times
Been thanked: 24 times

Re: Feedback 2.0 Alpha 3

Beitrag von LutzB »

Was sagt das update Log?
Nach oben
aiole
Beiträge: 7742
Registriert: Mo Okt 08, 2018 4:51 pm
Has thanked: 16 times
Been thanked: 31 times

Re: Feedback 2.0 Alpha 3

Beitrag von aiole »

empty string?

Code: Alles auswählen

#### running update ####
#### 1. fetching latest data from 'origin' ####
POST git-upload-pack (144 bytes)
From https://github.com/openWB/core
 = [up to date]        master     -> origin/master
 = [up to date]        testing    -> origin/testing
#### done
#### 2. checkout selected branch ''
fatal: empty string is not a valid pathspec. please use . instead if you meant to match
all paths
#### 3. reset working dir ###
#### selected tag: ''
fatal: ambiguous argument '': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
#### 4. rebooting system ####
#### updating available version info ####
current commit: 2022-10-04 13:04:51 +0200 [0122f0dc]
fetching latest data from origin...
POST git-upload-pack (144 bytes)
From https://github.com/openWB/core
/var/www/html/openWB/data/log/update.log                     1341/6574               20%
#### running update ####
#### 1. fetching latest data from 'origin' ####
POST git-upload-pack (144 bytes)
From https://github.com/openWB/core
 = [up to date]        master     -> origin/master
 = [up to date]        testing    -> origin/testing
#### done
#### 2. checkout selected branch ''
fatal: empty string is not a valid pathspec. please use . instead if you meant to match
all paths
#### 3. reset working dir ###
#### selected tag: ''
fatal: ambiguous argument '': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
#### 4. rebooting system ####
#### updating available version info ####
current commit: 2022-10-04 13:04:51 +0200 [0122f0dc]
fetching latest data from origin...
POST git-upload-pack (144 bytes)
From https://github.com/openWB/core
 = [up to date]        master     -> origin/master
 = [up to date]        testing    -> origin/testing
done
branches:
checking commit for origin/master...2022-10-05 10:22:59 +0200 [9f94c0a7]
tags in branch:
1.99.002: Merge pull request #339 from benderl/web
1.99.003: Update README.md
master: {"1.99.002":"1.99.002: Merge pull request #339 from benderl/web","1.99.003":"1.9
9.003: Update README.md"}
checking commit for origin/testing...2022-09-27 12:21:00 +0200 [c2a21b57]
tags in branch:
1.99.002: Merge pull request #339 from benderl/web
1.99.003: Update README.md
testing: {"1.99.002":"1.99.002: Merge pull request #339 from benderl/web","1.99.003":"1.
99.003: Update README.md"}
{
  "master": {
    "commit": "2022-10-05 10:22:59 +0200 [9f94c0a7]",
    "tags": {
      "1.99.002": "1.99.002: Merge pull request #339 from benderl/web",
      "1.99.003": "1.99.003: Update README.md"
    }
  },
  "testing": {
    "commit": "2022-09-27 12:21:00 +0200 [c2a21b57]",
    "tags": {
      "1.99.002": "1.99.002: Merge pull request #339 from benderl/web",
      "1.99.003": "1.99.003: Update README.md"
    }
  }
}
Nach oben
LutzB
Beiträge: 3779
Registriert: Di Feb 25, 2020 9:23 am
Has thanked: 4 times
Been thanked: 24 times

Re: Feedback 2.0 Alpha 3

Beitrag von LutzB »

Code: Alles auswählen

/var/www/html/openWB/runs/update_self.sh "master" "*HEAD*"
Nach oben
aiole
Beiträge: 7742
Registriert: Mo Okt 08, 2018 4:51 pm
Has thanked: 16 times
Been thanked: 31 times

Re: Feedback 2.0 Alpha 3

Beitrag von aiole »

Danke Dir - hat mit den Parametern hochgezogen
Nach oben
Gesperrt

Zurück zu „Software 2.x“