Skoda Enyaq sollte "Sofort" laden.
Liegt es daran, dass der Enyaq SOC per MQTT noch nicht gültig geschrieben wurde? Ich bin gerade bei der Umsetzung.
Main Log
Code: Alles auswählen
12-26 20:57:00,522 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:10,368 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:20,150 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:30,132 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:41,007 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:50,890 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:57:51,108 - {pymodbus.client.sync:218} - {ERROR:Subdata} - Connection to (None, 8899) failed: [Errno 111] Connection refused
2023-12-26 20:57:51,172 - {modules.common.fault_state:55} - {ERROR:Subdata} - Ladepunkt: FaultState FaultStateLevel.ERROR, FaultStr Modbus-Client konnte keine Verbindung zu None:8899 aufbauen. Bitte Einstellungen (IP-Adresse, Ladepunkt-Typ, ..) und Hardware-Anschluss prüfen., Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 53, in __enter__
self.delegate.__enter__()
File "/home/openwb/.local/lib/python3.9/site-packages/pymodbus/client/sync.py", line 120, in __enter__
raise ConnectionException("Failed to connect[%s]" % (self.__str__()))
pymodbus.exceptions.ConnectionException: Modbus Error: [Connection] Failed to connect[ModbusTcpClient(None:8899)]
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/chargepoints/openwb_series2_satellit/chargepoint_module.py", line 40, in __init__
self._create_client()
File "/var/www/html/openWB/packages/modules/chargepoints/openwb_series2_satellit/chargepoint_module.py", line 50, in _create_client
self._client = ClientHandler(
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/clients.py", line 36, in __init__
self.evse_client = self._evse_factory(client, evse_ids)
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/clients.py", line 45, in _evse_factory
with client:
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 55, in __enter__
raise FaultState.error(
modules.common.fault_state.FaultState: ('Modbus-Client konnte keine Verbindung zu None:8899 aufbauen. Bitte Einstellungen (IP-Adresse, Ladepunkt-Typ, ..) und Hardware-Anschluss prüfen.', <FaultStateLevel.ERROR: 2>)
2023-12-26 20:57:51,230 - {modules.loadvars:77} - {ERROR:MainThread} - Fehler im loadvars-Modul bei Element {'type': 'cp', 'id': 8}
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/loadvars.py", line 64, in _update_values_of_level
chargepoint = data.data.cp_data[f'{type_to_topic_mapping(element["type"])}{element["id"]}']
KeyError: 'cp8'
2023-12-26 20:58:00,891 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:58:02,563 - {pymodbus.client.sync:218} - {ERROR:Subdata} - Connection to (None, 8899) failed: [Errno 111] Connection refused
2023-12-26 20:58:02,565 - {modules.common.fault_state:55} - {ERROR:Subdata} - Ladepunkt: FaultState FaultStateLevel.ERROR, FaultStr Modbus-Client konnte keine Verbindung zu None:8899 aufbauen. Bitte Einstellungen (IP-Adresse, Ladepunkt-Typ, ..) und Hardware-Anschluss prüfen., Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 53, in __enter__
self.delegate.__enter__()
File "/home/openwb/.local/lib/python3.9/site-packages/pymodbus/client/sync.py", line 120, in __enter__
raise ConnectionException("Failed to connect[%s]" % (self.__str__()))
pymodbus.exceptions.ConnectionException: Modbus Error: [Connection] Failed to connect[ModbusTcpClient(None:8899)]
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/chargepoints/openwb_series2_satellit/chargepoint_module.py", line 40, in __init__
self._create_client()
File "/var/www/html/openWB/packages/modules/chargepoints/openwb_series2_satellit/chargepoint_module.py", line 50, in _create_client
self._client = ClientHandler(
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/clients.py", line 36, in __init__
self.evse_client = self._evse_factory(client, evse_ids)
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/clients.py", line 45, in _evse_factory
with client:
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 55, in __enter__
raise FaultState.error(
modules.common.fault_state.FaultState: ('Modbus-Client konnte keine Verbindung zu None:8899 aufbauen. Bitte Einstellungen (IP-Adresse, Ladepunkt-Typ, ..) und Hardware-Anschluss prüfen.', <FaultStateLevel.ERROR: 2>)
2023-12-26 20:58:10,821 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:58:20,750 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:58:30,649 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:58:31,154 - {helpermodules.changed_values_handler:87} - {ERROR:MainThread} - 'cp9'
Traceback (most recent call last):
File "/var/www/html/openWB/packages/helpermodules/changed_values_handler.py", line 85, in pub_changed_values
self.prev_data.cp_data[key].data, value.data)
KeyError: 'cp9'
2023-12-26 20:58:37,973 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/evse_current, Payload 500 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 20:58:38,039 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/internal_chargepoint/0/get/evse_current, Payload 500 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 20:58:38,090 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc, Payload None darf nicht 'None' sein.
2023-12-26 20:58:38,095 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc_timestamp, Payload None darf nicht 'None' sein.
2023-12-26 20:58:38,100 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/evse_current, Payload 500 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 20:58:40,693 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:58:50,690 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:00,629 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:10,643 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:17,688 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc, Payload None darf nicht 'None' sein.
2023-12-26 20:59:17,693 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc_timestamp, Payload None darf nicht 'None' sein.
2023-12-26 20:59:20,708 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:30,813 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:35,818 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc, Payload None darf nicht 'None' sein.
2023-12-26 20:59:35,826 - {helpermodules.setdata:339} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/get/soc_timestamp, Payload None darf nicht 'None' sein.
2023-12-26 20:59:40,673 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 20:59:50,840 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:00,753 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:03,089 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/pv/get/daily_exported, Payload -11239756.781 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 21:00:10,138 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:20,052 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:21,835 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/set/current, Payload 3 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 21:00:30,897 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:40,923 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:00:50,912 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:00,880 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:10,835 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:17,922 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/set/current, Payload 3 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 21:01:20,834 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:31,038 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:41,010 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:01:51,023 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:00,984 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:10,929 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:18,469 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/set/current, Payload 3 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 21:02:20,847 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:30,863 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:40,887 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:02:51,018 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:03:00,999 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:03:10,098 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:03:16,717 - {helpermodules.setdata:330} - {ERROR:Setdata} - Payload ungültig: Topic openWB/set/chargepoint/9/set/current, Payload 3 liegt in keinem der angegebenen Wertebereiche.
2023-12-26 21:03:20,127 - {modules.devices.kostal_piko.device:64} - {WARNING:device4} - Kostal Piko: Es konnten keine Werte gelesen werden, da noch keine Komponenten konfiguriert wurden.
2023-12-26 21:03:30,985 - {modules
Code: Alles auswählen
2023-12-26 12:42:38,582 - {asyncio:59} - {DEBUG:Internal Chargepoint} - Using selector: EpollSelector
2023-12-26 20:58:30,146 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 20:58:30,344 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:30,346 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 20:58:31,430 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 20:58:31,590 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:31,796 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:31,955 - {modules.common.evse:68} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist nicht aktiviert.
2023-12-26 20:58:32,132 - {modules.common.evse:78} - {DEBUG:Internal Chargepoint} - Bit zur Angabe der Ströme in 0,1A-Schritten wird gesetzt.
2023-12-26 20:58:33,347 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:58:35,375 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 20:58:35,538 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:35,541 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 20:58:36,608 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 20:58:36,801 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:36,992 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:58:37,152 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:58:37,312 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:59:15,013 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 20:59:15,162 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:15,164 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 20:59:16,230 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 20:59:16,390 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:16,599 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:16,759 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:59:16,919 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:59:33,103 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 20:59:33,286 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:33,287 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 20:59:34,356 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 20:59:34,518 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:34,708 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 20:59:34,868 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 20:59:35,028 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 21:01:47,613 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 21:01:47,668 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 21:07:28,783 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 21:07:28,949 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 21:07:28,950 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 21:07:30,017 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 21:07:30,178 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 21:07:30,369 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 21:07:30,516 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 21:07:30,674 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 21:31:02,458 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 21:31:02,508 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 22:01:44,670 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:01:44,719 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 22:07:49,854 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:07:49,901 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 22:22:30,074 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:22:30,122 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 22:33:24,669 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:33:24,718 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-26 22:40:00,854 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 22:40:01,027 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:40:01,032 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 22:40:02,100 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 22:40:02,261 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:40:02,452 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:40:02,612 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 22:40:02,772 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 22:41:41,738 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 22:41:41,899 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:41:41,900 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 22:41:42,969 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-12-26 22:41:43,129 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:41:43,324 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:41:43,480 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 22:41:43,656 - {modules.common.evse:65} - {DEBUG:Internal Chargepoint} - Angabe der Ströme in 0,01A-Schritten ist aktiviert.
2023-12-26 22:41:57,638 - {modules.internal_chargepoint_handler.clients:143} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-12-26 22:41:57,803 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-26 22:41:57,804 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-12-26 22:41:58,872 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105