openWB Forum

Verfasst: **Sa Dez 18, 2021 8:07 am**

Guten Morgen,

ich hatte heute wieder saldierende Werte, bis die WR angesprungen sind.
Der WR mit der IP 192.168.2.182 wird nicht in die Erzeugung eingerechnet.
Ich geh jetzt mal wieder auf die Beta zurück.

VG
Christian

Code: Alles auswählen

2021-12-18 09:00:49: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 09:00:49: PID: 28272: root: PV Watt: -101.0
2021-12-18 09:00:48: PID: 28272: root: Komponente Json Wechselrichter auslesen.
2021-12-18 09:00:48: PID: 28272: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 09:00:48: PID: 28272: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 915
2021-12-18 09:00:48: PID: 28272: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 09:00:48: PID: 28272: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769dd170>}
2021-12-18 09:00:48: PID: 28272: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 09:00:45: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:45: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:45: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:45: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:45: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 09:00:45: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 09:00:45: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 09:00:45: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 09:00:45: PID: 27818: root: PV Watt: -107.0
2021-12-18 09:00:45: PID: 27818: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 940
2021-12-18 09:00:45: PID: 27818: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 09:00:44: PID: 27818: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 09:00:44: PID: 27818: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75be5bf0>}
2021-12-18 09:00:44: PID: 27818: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 09:00:42: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 09:00:42: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 09:00:42: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 09:00:40: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 09:00:39: PID: 26757: root: PV Watt: -102.0
2021-12-18 09:00:38: PID: 26757: root: Komponente Json Wechselrichter auslesen.
2021-12-18 09:00:38: PID: 26757: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 09:00:38: PID: 26757: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 09:00:38: PID: 26757: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 09:00:38: PID: 26757: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a57150>}
2021-12-18 09:00:38: PID: 26757: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 09:00:36: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:36: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:36: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:36: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:35: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 09:00:35: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 09:00:35: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 09:00:35: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 09:00:34: PID: 26521: root: PV Watt: -109.0
2021-12-18 09:00:34: PID: 26521: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 960
2021-12-18 09:00:34: PID: 26521: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 09:00:34: PID: 26521: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 09:00:34: PID: 26521: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75bdcbf0>}
2021-12-18 09:00:34: PID: 26521: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 09:00:32: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 09:00:32: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 09:00:32: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 09:00:30: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 09:00:30: PID: 25252: root: PV Watt: -103.0
2021-12-18 09:00:29: PID: 25252: root: Komponente Json Wechselrichter auslesen.
2021-12-18 09:00:29: PID: 25252: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 09:00:29: PID: 25252: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 911
2021-12-18 09:00:29: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:29: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:29: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:29: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:29: PID: 25252: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 09:00:29: PID: 25252: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a3a150>}
2021-12-18 09:00:29: PID: 25252: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 09:00:26: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 09:00:25: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 09:00:25: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 09:00:25: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 09:00:25: PID: 25227: root: PV Watt: -110.0
2021-12-18 09:00:25: PID: 25227: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 972
2021-12-18 09:00:25: PID: 25227: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 09:00:25: PID: 25227: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 09:00:25: PID: 25227: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75c11bf0>}
2021-12-18 09:00:25: PID: 25227: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 09:00:23: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 09:00:23: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 09:00:23: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 09:00:21: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 09:00:21: PID: 24200: root: PV Watt: -105.0
2021-12-18 09:00:20: PID: 24200: root: Komponente Json Wechselrichter auslesen.
2021-12-18 09:00:20: PID: 24200: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 09:00:20: PID: 24200: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 941
2021-12-18 09:00:20: PID: 24200: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 09:00:20: PID: 24200: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a2c170>}
2021-12-18 09:00:20: PID: 24200: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 09:00:17: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:17: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:17: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:17: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:15: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 09:00:15: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 09:00:15: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 09:00:15: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 09:00:15: PID: 23902: root: PV Watt: -111.0
2021-12-18 09:00:15: PID: 23902: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 918
2021-12-18 09:00:14: PID: 23902: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 09:00:14: PID: 23902: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 09:00:14: PID: 23902: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75c17bf0>}
2021-12-18 09:00:14: PID: 23902: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 09:00:12: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 09:00:12: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 09:00:12: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 09:00:10: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 09:00:10: PID: 23029: root: PV Watt: -107.0
2021-12-18 09:00:09: PID: 23029: root: Komponente Json Wechselrichter auslesen.
2021-12-18 09:00:09: PID: 23029: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 09:00:09: PID: 23029: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 09:00:09: PID: 23029: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 09:00:09: PID: 23029: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a70170>}
2021-12-18 09:00:09: PID: 23029: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 09:00:06: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:06: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:06: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:06: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 09:00:06: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 09:00:06: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 09:00:06: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 09:00:06: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 09:00:05: PID: 22550: root: PV Watt: -113.0
2021-12-18 09:00:05: PID: 22550: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 950
2021-12-18 09:00:05: PID: 22550: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 09:00:05: PID: 22550: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 09:00:05: PID: 22550: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75c47bf0>}
2021-12-18 09:00:05: PID: 22550: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 09:00:02: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 09:00:02: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 09:00:02: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 09:00:00: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:59: PID: 21472: root: PV Watt: -107.0
2021-12-18 08:59:59: PID: 21472: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:59: PID: 21472: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:59: PID: 21472: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 08:59:59: PID: 21472: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:58: PID: 21472: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a74170>}
2021-12-18 08:59:58: PID: 21472: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:59:56: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:55: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:55: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:55: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:55: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:55: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:55: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:55: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:55: PID: 20989: root: PV Watt: -117.0
2021-12-18 08:59:55: PID: 20989: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 972
2021-12-18 08:59:55: PID: 20989: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:55: PID: 20989: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:55: PID: 20989: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75bd5bf0>}
2021-12-18 08:59:55: PID: 20989: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:52: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:52: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:52: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:59:50: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:49: PID: 20145: root: PV Watt: -108.0
2021-12-18 08:59:49: PID: 20145: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:49: PID: 20145: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:49: PID: 20145: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 08:59:48: PID: 20145: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:48: PID: 20145: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a44170>}
2021-12-18 08:59:48: PID: 20145: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:59:45: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:45: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:45: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:45: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:45: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:45: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:45: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:45: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:45: PID: 19698: root: PV Watt: -117.0
2021-12-18 08:59:45: PID: 19698: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 948
2021-12-18 08:59:45: PID: 19698: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:45: PID: 19698: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:45: PID: 19698: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75bbebf0>}
2021-12-18 08:59:45: PID: 19698: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:42: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:42: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:42: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:59:40: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:39: PID: 18781: root: PV Watt: -111.0
2021-12-18 08:59:38: PID: 18781: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:38: PID: 18781: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:38: PID: 18781: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 915
2021-12-18 08:59:38: PID: 18781: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:38: PID: 18781: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769f5150>}
2021-12-18 08:59:38: PID: 18781: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:59:36: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:36: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:36: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:36: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:35: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:35: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:35: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:35: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:35: PID: 18396: root: PV Watt: -120.0
2021-12-18 08:59:35: PID: 18396: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 972
2021-12-18 08:59:35: PID: 18396: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:35: PID: 18396: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:35: PID: 18396: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75be5bf0>}
2021-12-18 08:59:35: PID: 18396: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:32: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:32: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:32: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:59:30: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:30: PID: 17426: root: PV Watt: -111.0
2021-12-18 08:59:29: PID: 17426: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:29: PID: 17426: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:29: PID: 17426: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 08:59:29: PID: 17426: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:28: PID: 17426: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769dd170>}
2021-12-18 08:59:28: PID: 17426: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:59:26: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:26: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:26: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:26: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:25: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:25: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:25: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:25: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:25: PID: 17105: root: PV Watt: -119.0
2021-12-18 08:59:25: PID: 17105: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 944
2021-12-18 08:59:25: PID: 17105: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:25: PID: 17105: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:25: PID: 17105: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75b75bf0>}
2021-12-18 08:59:25: PID: 17105: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:22: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:22: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:22: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:59:21: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:20: PID: 16277: root: PV Watt: -113.0
2021-12-18 08:59:20: PID: 16277: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:20: PID: 16277: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:20: PID: 16277: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 943
2021-12-18 08:59:18: PID: 16277: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:18: PID: 16277: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a20150>}
2021-12-18 08:59:18: PID: 16277: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:59:15: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:15: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:15: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:15: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:15: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:15: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:15: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:15: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:15: PID: 15741: root: PV Watt: -122.0
2021-12-18 08:59:15: PID: 15741: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 972
2021-12-18 08:59:15: PID: 15741: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:15: PID: 15741: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:15: PID: 15741: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75c4ebf0>}
2021-12-18 08:59:15: PID: 15741: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:12: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:12: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:12: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:59:10: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:59:09: PID: 15127: root: PV Watt: -115.0
2021-12-18 08:59:08: PID: 15127: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:59:08: PID: 15127: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:59:08: PID: 15127: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 912
2021-12-18 08:59:08: PID: 15127: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:59:08: PID: 15127: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769c4150>}
2021-12-18 08:59:08: PID: 15127: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 08:59:05: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:59:05: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:59:05: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:59:05: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:59:05: PID: 14379: root: PV Watt: -123.0
2021-12-18 08:59:05: PID: 14379: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 972
2021-12-18 08:59:05: PID: 14379: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:59:05: PID: 14379: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:59:05: PID: 14379: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75b61bf0>}
2021-12-18 08:59:05: PID: 14379: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:59:05: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:05: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:05: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:05: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:59:02: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:59:02: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:59:02: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:58:59: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:58:59: PID: 13524: root: PV Watt: -116.0
2021-12-18 08:58:58: PID: 13524: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:58:58: PID: 13524: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:58:58: PID: 13524: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 938
2021-12-18 08:58:58: PID: 13524: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:58:58: PID: 13524: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76aa9150>}
2021-12-18 08:58:58: PID: 13524: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 08:58:55: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:58:55: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:58:55: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:58:55: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:55: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:58:55: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:55: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:55: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:54: PID: 13049: root: PV Watt: -125.0
2021-12-18 08:58:54: PID: 13049: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 960
2021-12-18 08:58:54: PID: 13049: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:58:54: PID: 13049: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:58:54: PID: 13049: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75b71bf0>}
2021-12-18 08:58:54: PID: 13049: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:58:52: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:58:52: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:58:52: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:58:49: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:58:49: PID: 12090: root: PV Watt: -117.0
2021-12-18 08:58:48: PID: 12090: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:58:48: PID: 12090: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:58:48: PID: 12090: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 940
2021-12-18 08:58:48: PID: 12090: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:58:48: PID: 12090: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x76a1a150>}
2021-12-18 08:58:48: PID: 12090: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 08:58:46: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:46: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:46: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:46: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:45: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:58:45: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:58:45: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:58:45: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:58:44: PID: 11754: root: PV Watt: -125.0
2021-12-18 08:58:44: PID: 11754: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 928
2021-12-18 08:58:44: PID: 11754: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:58:44: PID: 11754: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:58:44: PID: 11754: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75c12bf0>}
2021-12-18 08:58:44: PID: 11754: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:58:42: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:58:42: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:58:42: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:58:40: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:58:39: PID: 10824: root: PV Watt: -119.0
2021-12-18 08:58:39: PID: 10824: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:58:39: PID: 10824: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:58:39: PID: 10824: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 940
2021-12-18 08:58:38: PID: 10824: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:58:38: PID: 10824: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769db170>}
2021-12-18 08:58:38: PID: 10824: root: Json Konfiguration: {'jq_counter': '.Body.Data.Site.E_Total', 'jq_power': '.Body.Data.Site.P_PV'}
2021-12-18 08:58:36: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:36: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:36: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:36: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:35: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:58:35: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:58:35: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:58:35: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:58:34: PID: 10456: root: PV Watt: -125.0
2021-12-18 08:58:34: PID: 10456: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 960
2021-12-18 08:58:34: PID: 10456: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:58:34: PID: 10456: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:58:34: PID: 10456: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75b8bbf0>}
2021-12-18 08:58:34: PID: 10456: root: Fronius IP-Adresse: 192.168.2.180
2021-12-18 08:58:32: WR IP2: 192.168.2.182 (LV2) at 20 main modules/wr_fronius/main.sh
2021-12-18 08:58:32: WR Gen 24: 0 (LV2) at 19 main modules/wr_fronius/main.sh
2021-12-18 08:58:32: WR IP: 192.168.2.180 (LV2) at 18 main modules/wr_fronius/main.sh
2021-12-18 08:58:29: RET: 0 (LV2) at 29 main modules/wr2_json/main.sh
2021-12-18 08:58:29: PID: 9545: root: PV Watt: -120.0
2021-12-18 08:58:28: PID: 9545: root: Komponente Json Wechselrichter auslesen.
2021-12-18 08:58:28: PID: 9545: root: Antwort auf http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi: <Response [200]>
2021-12-18 08:58:28: PID: 9545: requests.packages.urllib3.connectionpool: http://192.168.2.181:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi HTTP/1.1" 200 938
2021-12-18 08:58:28: PID: 9545: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.181
2021-12-18 08:58:28: PID: 9545: root: Start device reading {'component2': <modules.json.inverter.JsonInverter object at 0x769cb150>}
2021-12-18 08:58:28: PID: 9545: root: Json Konfiguration: {'jq_power': '.Body.Data.Site.P_PV', 'jq_counter': '.Body.Data.Site.E_Total'}
2021-12-18 08:58:26: Schaltschwelle: 230, zum runterregeln: 0 (LV0) at 555 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:25: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:25: LP1 Anzahl Phasen während keiner Ladung= 0 (LV0) at 455 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:25: Alte Anzahl genutzter Phasen= 0 (LV0) at 422 main /var/www/html/openWB/regel.sh
2021-12-18 08:58:25: PV kWh : .Body.Data.Site.E_Total (LV2) at 24 main modules/wr2_json/main.sh
2021-12-18 08:58:25: PV Watt: .Body.Data.Site.P_PV (LV2) at 23 main modules/wr2_json/main.sh
2021-12-18 08:58:25: PV URL : http://192.168.2.181/solar_api/v1/GetPowerFlowRealtimeData.fcgi (LV2) at 22 main modules/wr2_json/main.sh
2021-12-18 08:58:25: RET: 0 (LV2) at 25 main modules/wr_fronius/main.sh
2021-12-18 08:58:25: PID: 9098: root: PV Watt: -126.0
2021-12-18 08:58:25: PID: 9098: requests.packages.urllib3.connectionpool: http://192.168.2.180:80 "GET /solar_api/v1/GetPowerFlowRealtimeData.fcgi?Scope=System HTTP/1.1" 200 947
2021-12-18 08:58:25: PID: 9098: requests.packages.urllib3.connectionpool: Starting new HTTP connection (1): 192.168.2.180
2021-12-18 08:58:24: PID: 9098: root: Komponente Fronius Wechselrichter auslesen.
2021-12-18 08:58:24: PID: 9098: root: Start device reading {'component1': <modules.fronius.inverter.FroniusInverter object at 0x75bd5bf0>}
2021-12-18 08:58:24: PID: 9098: root: Fronius IP-Adresse: 192.168.2.180

Verfasst: **Sa Dez 18, 2021 9:05 am**

Das zeigt jetzt, dass in das JSON PV Modzl noch was rein muss, damit die Nacht (schlafender WR) abgefangen wird.

VG
Det

Verfasst: **Sa Dez 18, 2021 9:22 am**

derNeueDet hat geschrieben: ↑Sa Dez 18, 2021 9:05 amDas zeigt jetzt, dass in das JSON PV Modzl noch was rein muss, damit die Nacht (schlafender WR) abgefangen wird.

Um das zu konkretisieren: Man muss den Pfadausdruck den @mepfh offensichtlich aktuell nutzt:

Code: Alles auswählen

.Body.Data.Site.P_PV

Ändern zu:

Code: Alles auswählen

.Body.Data.Site.P_PV | if . == null then 0 else . end

Also es muss nicht was "in das JSON PV Modul rein", sondern es muss nur richtig konfiguriert

.

Verfasst: **Sa Dez 18, 2021 9:33 am**

Kann man schon machen, aber
dann ist es nicht mehr kompatibel zu den Bestandsanlagen.

VG
Det

Verfasst: **Sa Dez 18, 2021 10:54 am**

Meth hat geschrieben: ↑Sa Dez 18, 2021 6:31 am Hallo ,

Btw das neue byd Batterie Modul geht immer noch nicht.
Liest keine Daten aus .
Keine entladeleistung und ladeleistung , keinen soc...
Steht aber nix im openwb.log
Nur im Status
Screenshot_20211218-073022_Firefox.jpg

So habe nun folgende Meldung im Debug.Log nach Stellung des Debugmodus auf Level 2

2021-12-18 11:52:28: BattLeistung: 19 (LV1) at 30 main modules/speicher_bydhv/main.sh
2021-12-18 11:52:28: RET: 1 (LV2) at 26 main modules/speicher_bydhv/main.sh
AttributeError: 'NoneType' object has no attribute 'group'
group = re.search("^.*value=$", response).group()
File "/var/www/html/openWB/modules/speicher_bydhv/byd.py", line 36, in <module>
Traceback (most recent call last):
2021-12-18 11:52:27: PID: 877: Speicher Passwort: byd@12345
2021-12-18 11:52:27: PID: 877: Speicher User: installer
2021-12-18 11:52:27: PID: 877: Speicher IP: 192.168.0.30
2021-12-18 11:52:27: Speicher User: byd@12345 (LV2) at 21 main modules/speicher_bydhv/main.sh
2021-12-18 11:52:27: Speicher Passwort: installer (LV2) at 20 main modules/speicher_bydhv/main.sh
2021-12-18 11:52:27: Speicher IP: 192.168.0.30 (LV2) at 19 main modules/speicher_bydhv/main.sh

Hoffe das hilft

Verfasst: **Sa Dez 18, 2021 12:22 pm**

Bei mir fehlen seit dem Einspielen der aktuellen 1.9.250 nightly (475cae4d) die aktuellen PV Verbrauchsangaben vom SMA Wechselrichter.
Zuvor lief eine 1.9.249 Version ohne Probleme (Das Update war von einer ca. 4 Wochen alten 249 Version auf die aktuelle 250).
Die PV Daten werden per MODBUS-TCP aus dem SMA TRI-Power ausgelesen.
Die IP Adresse des WR stimmt, im Debug Protokoll wird kein Fehler gemeldet.
Die Daten aus dem SHM werden korrekt ausgelesen und gemeldet.
Die IP Verbindung zum WR steht ebenfalls, ein fehlender (ausgeschaltet) oder falsch konfigurierter (andere IP Adresse) Wechselrichter wird erkannt und gemeldet.

Code: Alles auswählen

...
2021-12-18 12:08:36: lla3 0	llv3 232.4	llas13  llas23  soclp1 0 soclp2 (LV1) at 1250 loadvars loadvars.sh
2021-12-18 12:08:36: lla2 0	llv2 231.8	llas12  llas22  sofortll 16 hausverbrauch 0 wattbezug -37 uberschuss 37 (LV1) at 1249 loadvars loadvars.sh
2021-12-18 12:08:36: lla1 0	llv1 233.0	llas11  llas21  mindestuberschuss 1300 abschaltuberschuss 0 lademodus 3 (LV1) at 1248 loadvars loadvars.sh
2021-12-18 12:08:36: pv1watt 0 pv2watt  pvwatt 0 ladeleistung 0 llalt 0 nachtladen 0 nachtladen 0 minimalA 6 maximalA 20 (LV1) at 1247 loadvars loadvars.sh
pymodbus.exceptions.ConnectionException: Modbus Error: [Connection] Failed to connect[ModbusTcpClient(192.168.178.32:502)]
    raise ConnectionException("Failed to connect[%s]" % (self.__str__()))
  File "/usr/local/lib/python3.5/dist-packages/pymodbus/client/sync.py", line 119, in __enter__
    self.delegate.__enter__()
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 48, in __enter__
    with ModbusClient(ipaddress) as client:
  File "/var/www/html/openWB/modules/wr_tripower9000/tripower.py", line 33, in update_sma_modbus
    update_sma_modbus(filter("none".__ne__, sys.argv[2:]))
  File "/var/www/html/openWB/modules/wr_tripower9000/tripower.py", line 55, in update_sma
    update_sma()
  File "/var/www/html/openWB/modules/wr_tripower9000/tripower.py", line 61, in <module>
Traceback (most recent call last)
...

Auszug Debug Protokoll bei einwandfrfeier IP Verbindung zum WR:

Code: Alles auswählen

...
2021-12-18 12:13:11: **** Regulation loop start **** (LV1) at 50 main /var/www/html/openWB/regel.sh
2021-12-18 12:13:07: Timing Umschaltung: 480 / 480 (LV1) at 15 u1p3pswitch u1p3p.sh
2021-12-18 12:13:07: automatische Umschaltung aktiv (LV1) at 14 u1p3pswitch u1p3p.sh
2021-12-18 12:13:06: chargestatlp1 0	chargestatlp2 0	chargestatlp3 0 (LV1) at 1254 loadvars loadvars.sh
2021-12-18 12:13:06: plugstatlp1 0	plugstatlp2 0	plugstatlp3 0 (LV1) at 1253 loadvars loadvars.sh
2021-12-18 12:13:06: lp1enabled 1	lp2enabled 1	lp3enabled 1 (LV1) at 1252 loadvars loadvars.sh
2021-12-18 12:13:06: EVU 1:V/-0A 2: V/-0A 3: V/-0A (LV1) at 1251 loadvars loadvars.sh
2021-12-18 12:13:06: lla3 0	llv3 232.9	llas13  llas23  soclp1 0 soclp2 (LV1) at 1250 loadvars loadvars.sh
2021-12-18 12:13:06: lla2 0	llv2 232.5	llas12  llas22  sofortll 16 hausverbrauch 318 wattbezug -84 uberschuss 84 (LV1) at 1249 loadvars loadvars.sh
2021-12-18 12:13:06: lla1 0	llv1 233.7	llas11  llas21  mindestuberschuss 1300 abschaltuberschuss 0 lademodus 3 (LV1) at 1248 loadvars loadvars.sh
2021-12-18 12:13:06: pv1watt 0 pv2watt  pvwatt 0 ladeleistung 0 llalt 0 nachtladen 0 nachtladen 0 minimalA 6 maximalA 20 (LV1) at 1247 loadvars loadvars.sh
2021-12-18 12:13:01: **** Regulation loop start **** (LV1) at 50 main /var/www/html/openWB/regel.sh
...

Im PV Log finde ich keine Einträge seit den beiden letzten Updates:

Code: Alles auswählen

**** REBOOT ****
**** REBOOT ****
2021-12-17 17:07:46: Gesamt Anzahl Phasen= 1 (LV0) at 516 main /var/www/html/openWB/regel.sh
...

Verfasst: **Sa Dez 18, 2021 12:31 pm**

Hallo,

mit der 1.9.250 wird mir die Ladeleistung im Hausverbrauch angezeigt, bei Ladeleistung steht 0 kW. Entsprechend sind auch alle anderen Werte am LPT1 falsch und auch die grafische Darstellung. Zurück auf die stable 1.9.244 und alles passt wieder.

Außerdem ist mir am Display der openWB aufgefallen, dass nach einem Neustart Reste vom boot Theme liegen bleiben (ich verwende den Standard-Theme).

Verfasst: **Sa Dez 18, 2021 12:32 pm**

Hast du den Debug Level auf 2 gestellt?

VG
Det

Verfasst: **Sa Dez 18, 2021 12:37 pm**

Ich bin gemeint? Nein, habe ich nicht.

Verfasst: **Sa Dez 18, 2021 12:48 pm**

Candid hat geschrieben: ↑Sa Dez 18, 2021 12:37 pm Ich bin gemeint? Nein, habe ich nicht.

Nee, sorry, dein Beitrag ist gekommen, als ich gerade geschrieben habe.

Ich habe wp-bev gemeint.

Du müsstest eh ein Log hier einstellen, damit jemand was konkretes dazu sagen soll. Am Besten auch deine Konfiguration.

VG
Det

openWB Forum

Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250

Re: Rückmeldungen Nightly 1.9.250