2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] end of getActualPower
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret1
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":562666,"on":0}
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] written device infos to ramdisk cache
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] device info fetched: {'Waschmaschine': {'ain': '08761 0277838', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.448, 'energy': '50999', 'temperature': 26.5, 'state': True}, 'Spülmaschine': {'ain': '08761 0492164', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.983, 'energy': '272047', 'temperature': 27.5, 'state': True}, 'Warmwasser': {'ain': '11657 0244020', 'is_thermostat': False, 'power': 0.0, 'voltage': 225.201, 'energy': '562666', 'temperature': 25.5, 'state': False}, 'Klimaanlage': {'ain': '11657 0244019'}}
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] fetching device info for all devices from FRITZ!Box
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] should fetch new info from FRITZ!Box: True
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] age of cached device infos: 7.6 seconds
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] start of getActualPower
2021-12-25 12:05:07: (1) AVM (actor: Warmwasser) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:05:06: Speicher Entladung(-)/Ladung(+): 0 SpeicherSoC: 100
2021-12-25 12:05:06: Uberschuss: 55 Uberschuss mit Offset: 55
2021-12-25 12:05:06: EVU Bezug(-)/Einspeisung(+): 55 max Speicherladung: 0
2021-12-25 12:05:01: (2) WPSperre Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:05:01: (2) WPSperre Maximale Einschaltdauer nicht erreicht
2021-12-25 12:05:01: (2) WPSperre Immer an vor definiert 6:00 aktuelle Zeit 12:05
2021-12-25 12:05:01: (2) WPSperre Immer an nach definiert 22:00 aktuelle Zeit 12:05
2021-12-25 12:05:01: (1) Warmwasser Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:05:01: (1) Warmwasser Maximale Einschaltdauer nicht erreicht
2021-12-25 12:05:01: Total Watt nicht im Hausverbrauch: 0
2021-12-25 12:05:01: Total Watt nichtabschaltbarer smarthomedevices: 0
2021-12-25 12:05:01: Total Watt abschaltbarer smarthomedevices: 0
2021-12-25 12:05:01: (4) Waschma rel: 1 oncnt/onstandby/time: 0/0/43470 Status: 10 akt: 0 Z Hw: 50999
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] end of getActualPower
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret4
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":50999,"on":1}
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] age of cached device infos: 2.0 seconds
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] start of getActualPower
2021-12-25 12:05:01: (4) AVM (actor: Waschmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:05:01: (3) Geschirrsp rel: 1 oncnt/onstandby/time: 0/0/30580 Status: 10 akt: 0 Z Hw: 272047
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] end of getActualPower
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret3
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":272047,"on":1}
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] age of cached device infos: 1.4 seconds
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] start of getActualPower
2021-12-25 12:05:01: (3) AVM (actor: Spülmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:05:00: (2) WPSperre rel: 0 oncnt/onstandby/time: 0/0/42920 Status: 10 akt: 0 Z Hw: 0
2021-12-25 12:05:00: (2) WPSperre von Manuell auf Automatisch gestellt oder startup, Uebergangsfrist laueft noch 7230 > 557
2021-12-25 12:04:59: (1) Warmwasser rel: 0 oncnt/onstandby/time: 0/0/0 Status: 10 akt: 0 Z Hw: 562666
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] end of getActualPower
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret1
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":562666,"on":0}
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] written device infos to ramdisk cache
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] device info fetched: {'Waschmaschine': {'ain': '08761 0277838', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.448, 'energy': '50999', 'temperature': 26.5, 'state': True}, 'Spülmaschine': {'ain': '08761 0492164', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.983, 'energy': '272047', 'temperature': 27.5, 'state': True}, 'Warmwasser': {'ain': '11657 0244020', 'is_thermostat': False, 'power': 0.0, 'voltage': 225.201, 'energy': '562666', 'temperature': 25.5, 'state': False}, 'Klimaanlage': {'ain': '11657 0244019'}}
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] fetching device info for all devices from FRITZ!Box
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] should fetch new info from FRITZ!Box: True
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] age of cached device infos: 7.0 seconds
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] start of getActualPower
2021-12-25 12:04:59: (1) AVM (actor: Warmwasser) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:58: Speicher Entladung(-)/Ladung(+): 0 SpeicherSoC: 100
2021-12-25 12:04:58: Uberschuss: 55 Uberschuss mit Offset: 55
2021-12-25 12:04:58: EVU Bezug(-)/Einspeisung(+): 55 max Speicherladung: 0
2021-12-25 12:04:53: (2) WPSperre Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:53: (2) WPSperre Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:53: (2) WPSperre Immer an vor definiert 6:00 aktuelle Zeit 12:04
2021-12-25 12:04:53: (2) WPSperre Immer an nach definiert 22:00 aktuelle Zeit 12:04
2021-12-25 12:04:53: (1) Warmwasser Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:53: (1) Warmwasser Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:53: Total Watt nicht im Hausverbrauch: 0
2021-12-25 12:04:53: Total Watt nichtabschaltbarer smarthomedevices: 0
2021-12-25 12:04:53: Total Watt abschaltbarer smarthomedevices: 0
2021-12-25 12:04:53: (4) Waschma rel: 1 oncnt/onstandby/time: 0/0/43462 Status: 10 akt: 0 Z Hw: 50999
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret4
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":50999,"on":1}
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] age of cached device infos: 1.5 seconds
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:53: (4) AVM (actor: Waschmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:53: (3) Geschirrsp rel: 1 oncnt/onstandby/time: 0/0/30572 Status: 10 akt: 0 Z Hw: 272047
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret3
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":272047,"on":1}
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] age of cached device infos: 1.1 seconds
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:53: (3) AVM (actor: Spülmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:52: (2) WPSperre rel: 0 oncnt/onstandby/time: 0/0/42920 Status: 10 akt: 0 Z Hw: 0
2021-12-25 12:04:52: (2) WPSperre von Manuell auf Automatisch gestellt oder startup, Uebergangsfrist laueft noch 7230 > 549
2021-12-25 12:04:52: (1) Warmwasser rel: 0 oncnt/onstandby/time: 0/0/0 Status: 10 akt: 0 Z Hw: 562666
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] end of getActualPower
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret1
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":562666,"on":0}
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] written device infos to ramdisk cache
2021-12-25 12:04:52: (1) AVM (actor: Warmwasser) [DEBUG] device info fetched: {'Waschmaschine': {'ain': '08761 0277838', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.448, 'energy': '50999', 'temperature': 26.5, 'state': True}, 'Spülmaschine': {'ain': '08761 0492164', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.983, 'energy': '272047', 'temperature': 27.5, 'state': True}, 'Warmwasser': {'ain': '11657 0244020', 'is_thermostat': False, 'power': 0.0, 'voltage': 225.201, 'energy': '562666', 'temperature': 25.5, 'state': False}, 'Klimaanlage': {'ain': '11657 0244019'}}
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] fetching device info for all devices from FRITZ!Box
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] should fetch new info from FRITZ!Box: True
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] age of cached device infos: 6.9 seconds
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] start of getActualPower
2021-12-25 12:04:51: (1) AVM (actor: Warmwasser) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:51: Speicher Entladung(-)/Ladung(+): 0 SpeicherSoC: 100
2021-12-25 12:04:51: Uberschuss: 57 Uberschuss mit Offset: 57
2021-12-25 12:04:51: EVU Bezug(-)/Einspeisung(+): 57 max Speicherladung: 0
2021-12-25 12:04:46: (2) WPSperre Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:46: (2) WPSperre Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:46: (2) WPSperre Immer an vor definiert 6:00 aktuelle Zeit 12:04
2021-12-25 12:04:46: (2) WPSperre Immer an nach definiert 22:00 aktuelle Zeit 12:04
2021-12-25 12:04:46: (1) Warmwasser Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:46: (1) Warmwasser Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:46: Total Watt nicht im Hausverbrauch: 0
2021-12-25 12:04:46: Total Watt nichtabschaltbarer smarthomedevices: 0
2021-12-25 12:04:46: Total Watt abschaltbarer smarthomedevices: 0
2021-12-25 12:04:46: (4) Waschma rel: 1 oncnt/onstandby/time: 0/0/43455 Status: 10 akt: 0 Z Hw: 50999
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret4
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":50999,"on":1}
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] age of cached device infos: 1.4 seconds
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:46: (4) AVM (actor: Waschmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:45: (3) Geschirrsp rel: 1 oncnt/onstandby/time: 0/0/30564 Status: 10 akt: 0 Z Hw: 272047
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret3
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":272047,"on":1}
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] age of cached device infos: 0.9 seconds
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:45: (3) AVM (actor: Spülmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:45: (2) WPSperre rel: 0 oncnt/onstandby/time: 0/0/42920 Status: 10 akt: 0 Z Hw: 0
2021-12-25 12:04:45: (2) WPSperre von Manuell auf Automatisch gestellt oder startup, Uebergangsfrist laueft noch 7230 > 542
2021-12-25 12:04:44: (1) Warmwasser rel: 0 oncnt/onstandby/time: 0/0/0 Status: 10 akt: 0 Z Hw: 562666
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] end of getActualPower
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret1
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":562666,"on":0}
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] written device infos to ramdisk cache
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] device info fetched: {'Waschmaschine': {'ain': '08761 0277838', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.448, 'energy': '50999', 'temperature': 26.5, 'state': True}, 'Spülmaschine': {'ain': '08761 0492164', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.983, 'energy': '272047', 'temperature': 27.5, 'state': True}, 'Warmwasser': {'ain': '11657 0244020', 'is_thermostat': False, 'power': 0.0, 'voltage': 225.201, 'energy': '562666', 'temperature': 25.5, 'state': False}, 'Klimaanlage': {'ain': '11657 0244019'}}
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] fetching device info for all devices from FRITZ!Box
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] should fetch new info from FRITZ!Box: True
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] age of cached device infos: 6.9 seconds
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] start of getActualPower
2021-12-25 12:04:44: (1) AVM (actor: Warmwasser) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:43: Speicher Entladung(-)/Ladung(+): 0 SpeicherSoC: 100
2021-12-25 12:04:43: Uberschuss: 67 Uberschuss mit Offset: 67
2021-12-25 12:04:43: EVU Bezug(-)/Einspeisung(+): 67 max Speicherladung: 0
2021-12-25 12:04:38: (2) WPSperre Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:38: (2) WPSperre Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:38: (2) WPSperre Immer an vor definiert 6:00 aktuelle Zeit 12:04
2021-12-25 12:04:38: (2) WPSperre Immer an nach definiert 22:00 aktuelle Zeit 12:04
2021-12-25 12:04:38: (1) Warmwasser Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:38: (1) Warmwasser Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:38: Total Watt nicht im Hausverbrauch: 0
2021-12-25 12:04:38: Total Watt nichtabschaltbarer smarthomedevices: 0
2021-12-25 12:04:38: Total Watt abschaltbarer smarthomedevices: 0
2021-12-25 12:04:38: (4) Waschma rel: 1 oncnt/onstandby/time: 0/0/43447 Status: 10 akt: 0 Z Hw: 50999
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret4
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":50999,"on":1}
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] age of cached device infos: 1.5 seconds
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:38: (4) AVM (actor: Waschmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:38: (3) Geschirrsp rel: 1 oncnt/onstandby/time: 0/0/30557 Status: 10 akt: 0 Z Hw: 272047
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] end of getActualPower
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret3
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":272047,"on":1}
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] using cached device infos from ramdisk
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] should fetch new info from FRITZ!Box: False
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] age of cached device infos: 1.0 seconds
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] start of getActualPower
2021-12-25 12:04:38: (3) AVM (actor: Spülmaschine) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:37: (2) WPSperre rel: 0 oncnt/onstandby/time: 0/0/42920 Status: 10 akt: 0 Z Hw: 0
2021-12-25 12:04:37: (2) WPSperre von Manuell auf Automatisch gestellt oder startup, Uebergangsfrist laueft noch 7230 > 534
2021-12-25 12:04:37: (1) Warmwasser rel: 0 oncnt/onstandby/time: 0/0/0 Status: 10 akt: 0 Z Hw: 562666
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] end of getActualPower
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] handing answer back to smarthomehandler via /var/www/html/openWB/ramdisk/smarthome_device_ret1
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] constructed JSON answer: {"power":0.0,"powerc":562666,"on":0}
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] end of readOrBuildDeviceInfoCache
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] written device infos to ramdisk cache
2021-12-25 12:04:37: (1) AVM (actor: Warmwasser) [DEBUG] device info fetched: {'Waschmaschine': {'ain': '08761 0277838', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.448, 'energy': '50999', 'temperature': 26.5, 'state': True}, 'Spülmaschine': {'ain': '08761 0492164', 'is_thermostat': False, 'power': 0.0, 'voltage': 226.983, 'energy': '272047', 'temperature': 27.5, 'state': True}, 'Warmwasser': {'ain': '11657 0244020', 'is_thermostat': False, 'power': 0.0, 'voltage': 225.201, 'energy': '562666', 'temperature': 25.5, 'state': False}, 'Klimaanlage': {'ain': '11657 0244019'}}
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] fetching device info for all devices from FRITZ!Box
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] should fetch new info from FRITZ!Box: True
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] age of cached device infos: 7.2 seconds
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] start of readOrBuildDeviceInfoCache
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] start of getActualPower
2021-12-25 12:04:36: (1) AVM (actor: Warmwasser) [DEBUG] found an AVM cache file, trying to load
2021-12-25 12:04:36: Speicher Entladung(-)/Ladung(+): 0 SpeicherSoC: 100
2021-12-25 12:04:36: Uberschuss: 73 Uberschuss mit Offset: 73
2021-12-25 12:04:36: EVU Bezug(-)/Einspeisung(+): 73 max Speicherladung: 0
2021-12-25 12:04:31: (2) WPSperre Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:31: (2) WPSperre Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:31: (2) WPSperre Immer an vor definiert 6:00 aktuelle Zeit 12:04
2021-12-25 12:04:31: (2) WPSperre Immer an nach definiert 22:00 aktuelle Zeit 12:04
2021-12-25 12:04:31: (1) Warmwasser Soll nicht eingeschaltet werden bei Ladung, pruefe 0
2021-12-25 12:04:31: (1) Warmwasser Maximale Einschaltdauer nicht erreicht
2021-12-25 12:04:31: Total Watt nicht im Hausverbrauch: 0
2021-12-25 12:04:31: Total Watt nichtabschaltbarer smarthomedevices: 0
2021-12-25 12:04:31: Total Watt abschaltbarer smarthomedevices: 0
Einschaltschwelle: neg. 5000
Aktuell hab ich das Ding auf Manuell eingeschaltet. Was könnte ich noch anders einstellen?
Wie gesagt, die Abschaltung bei Autoladen funktioniert tadellos, Nur wenn ich die Ladung stoppe, bleibt das Device einfach aus.
Grüße...