openWB series2 standard+ + MQTT Anzahl Phasen
Verfasst: Mo Nov 30, 2020 9:51 am
Hallo,
ich versuche mittels MQTT eine openWB series2 standard+ Wallbox, an dem ein ZOE hängt, zu steuern. Das funktioniert auch ohne Probleme, es tauchen nur einige Fragen auf. Der Übersichtlichkeithalber mache ich für jede Farge einen Thread auf.
Einige der Variablen sind von meinem Programm. Bitte nicht daran stören.
[zentralerTimestamp] => 1606654081
[W] => 3207
[boolChargePointConfigured] => 1
[VPhase1] => 225.0
[%Soc] => 0
[kWhDailyCharged] => 12.44
[TimeRemaining] => 22 Min
[kmCharged] => 51
[boolSocConfigured] => 0
[boolDirectModeChargekWh] => 0
[boolDirectChargeModeSoc] => 0
[strChargePointName] => LP1
[boolFinishAtTimeChargeActive] => 0
[boolChargeAtNight] => 0
[energyConsumptionPer100km] => 17
[kWhCounter] => 50.915
[VPhase2] => 225.1
[VPhase3] => 226.4
[AutolockStatus] => 0
[countPhasesInUse] => 2
[kWhActualCharged] => 8.77
[ChargeStatus] => 1
[kWhChargedSincePlugged] => 12.60
[PfPhase2] => 0
[PfPhase3] => 0
[PfPhase1] => 0
[AutolockConfigured] => 0
[boolPlugStat] => 1
[AConfigured] => 13
[APhase3] => 0.0
[APhase2] => 8.1
[ChargePointEnabled] => 1
[APhase1] => 8.2
[boolChargeStat] => 1
[lastRfId] => 0
[ChargeMode] => 0
[WHouseConsumption] => 400
[WAllChargePoints] => 3207
[boolRse] => 0
[DailyYieldHausverbrauchKwh] => -12.43
[DailyYieldAllChargePointsKwh] => 12.43
[strLastmanagementActive] =>
[boolChargeAtNight_direct] => 0
[boolChargeAtNight_nurpv] => 1
[boolChargeAtNight_minpv] => 1
[boolDisplayHouseConsumption] => 0
[boolDisplayDailyCharged] => 1
[boolEvuSmoothedActive] => 0
[boolChargeAtNight_standby] => 1
[Version] => 1.8.400Beta
[ConfiguredChargePoints] => 1
[Regler] => 39
[Objekt] => openWB
[Produkt] => openWB
[Firmware] => 1.8.400Beta
[WattstundenGesamtHeute] => 12.44
[Stationsstatus] => 2
[Ladestatus] => 3
[ADirectModeAmps] => 0
ich versuche mittels MQTT eine openWB series2 standard+ Wallbox, an dem ein ZOE hängt, zu steuern. Das funktioniert auch ohne Probleme, es tauchen nur einige Fragen auf. Der Übersichtlichkeithalber mache ich für jede Farge einen Thread auf.
- Die Wallbox ist auf 3 Phasen eingestelltt. Wenn ich die Ladung starte, meldet aber die Wallbox dass sie mit nur 2 Phasen läd. Warum?
Einige der Variablen sind von meinem Programm. Bitte nicht daran stören.
[zentralerTimestamp] => 1606654081
[W] => 3207
[boolChargePointConfigured] => 1
[VPhase1] => 225.0
[%Soc] => 0
[kWhDailyCharged] => 12.44
[TimeRemaining] => 22 Min
[kmCharged] => 51
[boolSocConfigured] => 0
[boolDirectModeChargekWh] => 0
[boolDirectChargeModeSoc] => 0
[strChargePointName] => LP1
[boolFinishAtTimeChargeActive] => 0
[boolChargeAtNight] => 0
[energyConsumptionPer100km] => 17
[kWhCounter] => 50.915
[VPhase2] => 225.1
[VPhase3] => 226.4
[AutolockStatus] => 0
[countPhasesInUse] => 2
[kWhActualCharged] => 8.77
[ChargeStatus] => 1
[kWhChargedSincePlugged] => 12.60
[PfPhase2] => 0
[PfPhase3] => 0
[PfPhase1] => 0
[AutolockConfigured] => 0
[boolPlugStat] => 1
[AConfigured] => 13
[APhase3] => 0.0
[APhase2] => 8.1
[ChargePointEnabled] => 1
[APhase1] => 8.2
[boolChargeStat] => 1
[lastRfId] => 0
[ChargeMode] => 0
[WHouseConsumption] => 400
[WAllChargePoints] => 3207
[boolRse] => 0
[DailyYieldHausverbrauchKwh] => -12.43
[DailyYieldAllChargePointsKwh] => 12.43
[strLastmanagementActive] =>
[boolChargeAtNight_direct] => 0
[boolChargeAtNight_nurpv] => 1
[boolChargeAtNight_minpv] => 1
[boolDisplayHouseConsumption] => 0
[boolDisplayDailyCharged] => 1
[boolEvuSmoothedActive] => 0
[boolChargeAtNight_standby] => 1
[Version] => 1.8.400Beta
[ConfiguredChargePoints] => 1
[Regler] => 39
[Objekt] => openWB
[Produkt] => openWB
[Firmware] => 1.8.400Beta
[WattstundenGesamtHeute] => 12.44
[Stationsstatus] => 2
[Ladestatus] => 3
[ADirectModeAmps] => 0