Rückmeldungen 2.1.5 Release & Release Patch 1/2

Fragen zur Nutzung, Features, usw..
andlem
Beiträge: 75
Registriert: Mi Jun 29, 2022 9:06 am
Been thanked: 2 times

Re: Rückmeldungen 2.1.5 Release

Beitrag von andlem »

openWB hat geschrieben: Mi Aug 28, 2024 10:07 am
Dahinter steckt das praktische Problem, dass der Onboard-Charger von meinem BMW 225xe die vielen Sollstromänderungen der openWB nicht toleriert und nach ca. 2 Stunden Ladezeit auf Error geht.
Das klingt eher nach Defekt am BMW. Rein technisch ist das ein PWM Signal, das wird üblicherweise vom Fahrzeug generell mehrmals pro Sekunde ausgewertet.
Glaube nicht. Auf Konstantstrom funktioniert es, egal ob 6 A oder 16 A oder irgendwas dazwischen. Ebenso keine Probleme an öffentlichen Ladesäulen.

Im Onboardcharger wird die PWM digitalisiert und plausibilisiert. Die Kriterien variieren von Hersteller zu Hersteller. Der Onboardcharger geht dann im Zweifelsfall auf Error. Probleme traten genau mit dem Übergang von 1.9 auf 2.x auf. Dabei wurde die feinere Regelung in mA-Schritten eingeführt, womit öfter Änderungen erfolgen.
Daphne
Beiträge: 88
Registriert: Do Sep 29, 2022 12:34 pm

Re: Rückmeldungen 2.1.5 Release

Beitrag von Daphne »

LenaK hat geschrieben: Mi Aug 28, 2024 9:09 am
Daphne hat geschrieben: Di Aug 27, 2024 4:55 pm Ich habe heute das Master 2.1.5 eingespielt.
Da tritt folgendes auf:
2024-08-27 18_48_40-openWB.jpg

Code: Alles auswählen

rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 420 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
Final group membership: openwb : openwb adm dialout cdrom sudo audio video plugdev games users input render netdev spi i2c gpio
Network...
Wait for connection...RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.
my primary IP: 192.168.178.71
my primary interface: eth0
running as primary, enabling plug'n'play network
apt configuration already up to date
install required packages with 'apt-get'...
OK:1 http://archive.raspberrypi.org/debian bullseye InRelease
OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Paketlisten werden gelesen…
Paketlisten werden gelesen…
Abhängigkeitsbaum wird aufgebaut…
Statusinformationen werden eingelesen…
accountsservice ist schon die neueste Version (0.6.55-3).
apache2 ist schon die neueste Version (2.4.61-1~deb11u1).
bc ist schon die neueste Version (1.07.1-2+b1).
chromium ist schon die neueste Version (106.0.5249.119-1~deb11u1).
chromium-l10n ist schon die neueste Version (106.0.5249.119-1~deb11u1).
git ist schon die neueste Version (1:2.30.2-1+deb11u2).
jq ist schon die neueste Version (1.6-2.1).
libapache2-mod-php ist schon die neueste Version (2:7.4+76).
lightdm-autologin-greeter ist schon die neueste Version (1.0-3).
mmc-utils ist schon die neueste Version (0+git20180327.b4fe0c8c-1).
mosquitto ist schon die neueste Version (2.0.11-1+deb11u1).
mosquitto-clients ist schon die neueste Version (2.0.11-1+deb11u1).
openbox-lxde-session ist schon die neueste Version (0.99.2-4).
php ist schon die neueste Version (2:7.4+76).
php-curl ist schon die neueste Version (2:7.4+76).
php-gd ist schon die neueste Version (2:7.4+76).
php-json ist schon die neueste Version (2:7.4+76).
php-xml ist schon die neueste Version (2:7.4+76).
socat ist schon die neueste Version (1.7.4.1-3).
sshpass ist schon die neueste Version (1.09-1).
ssl-cert ist schon die neueste Version (1.1.0+nmu1).
sudo ist schon die neueste Version (1.9.5p2-3+deb11u1).
vim ist schon die neueste Version (2:8.2.2434-3+deb11u1).
x11-xserver-utils ist schon die neueste Version (7.7+8).
xserver-xorg ist schon die neueste Version (1:7.7+22).
lightdm ist schon die neueste Version (1.26.0-7+rpt1).
python3-pip ist schon die neueste Version (20.3.4-4+rpt1+deb11u1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 132 nicht aktualisiert.
done
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
install required python packages with 'pip3'...
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: typing-extensions==4.4.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 1)) (4.4.0)
Requirement already satisfied: jq==1.1.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 2)) (1.1.3)
Requirement already satisfied: paho_mqtt==1.6.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 3)) (1.6.1)
Requirement already satisfied: pymodbus==2.5.2 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 4)) (2.5.2)
Requirement already satisfied: pytest==6.2.5 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 5)) (6.2.5)
Requirement already satisfied: requests_mock==1.9.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 6)) (1.9.3)
Requirement already satisfied: lxml==4.9.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 7)) (4.9.1)
Requirement already satisfied: aiohttp==3.9.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 8)) (3.9.4)
Requirement already satisfied: schedule==1.1.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 9)) (1.1.0)
Requirement already satisfied: PyJWT==2.6.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 10)) (2.6.0)
Requirement already satisfied: ipparser==0.3.8 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 11)) (0.3.8)
Requirement already satisfied: bs4==0.0.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 12)) (0.0.1)
Requirement already satisfied: pkce==1.0.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 13)) (1.0.3)
Requirement already satisfied: evdev==1.5.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 15)) (1.5.0)
Requirement already satisfied: cryptography==42.0.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 17)) (42.0.4)
Requirement already satisfied: msal==1.27.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 18)) (1.27.0)
Requirement already satisfied: python-dateutil==2.8.2 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 19)) (2.8.2)
Requirement already satisfied: umodbus==1.0.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 20)) (1.0.4)
Requirement already satisfied: pysmb==1.2.9.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 21)) (1.2.9.1)
Requirement already satisfied: pytz==2023.3.post1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 22)) (2023.3.post1)
Requirement already satisfied: grpcio==1.60.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 23)) (1.60.1)
Requirement already satisfied: protobuf==4.25.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 24)) (4.25.3)
Requirement already satisfied: bimmer_connected==0.15.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 25)) (0.15.1)
Requirement already satisfied: frozenlist>=1.1.1 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.4.1)
Requirement already satisfied: multidict<7.0,>=4.5 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (6.0.2)
Requirement already satisfied: attrs>=17.3.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (22.1.0)
Requirement already satisfied: aiosignal>=1.1.2 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.3.1)
Requirement already satisfied: yarl<2.0,>=1.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.8.1)
Requirement already satisfied: async-timeout<5.0,>=4.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (4.0.3)
Requirement already satisfied: httpx in /home/openwb/.local/lib/python3.9/site-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (0.27.0)
Requirement already satisfied: pycryptodome>=3.4 in /home/openwb/.local/lib/python3.9/site-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (3.20.0)
Requirement already satisfied: Pillow in /usr/lib/python3/dist-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (8.1.2)
Requirement already satisfied: beautifulsoup4 in /home/openwb/.local/lib/python3.9/site-packages (from bs4==0.0.1->-r /var/www/html/openWB/requirements.txt (line 12)) (4.11.1)
Requirement already satisfied: cffi>=1.12 in /home/openwb/.local/lib/python3.9/site-packages (from cryptography==42.0.4->-r /var/www/html/openWB/requirements.txt (line 17)) (1.16.0)
Requirement already satisfied: dnspython in /home/openwb/.local/lib/python3.9/site-packages (from ipparser==0.3.8->-r /var/www/html/openWB/requirements.txt (line 11)) (2.3.0)
Requirement already satisfied: requests<3,>=2.0.0 in /usr/lib/python3/dist-packages (from msal==1.27.0->-r /var/www/html/openWB/requirements.txt (line 18)) (2.25.1)
Requirement already satisfied: six>=1.15.0 in /usr/lib/python3/dist-packages (from pymodbus==2.5.2->-r /var/www/html/openWB/requirements.txt (line 4)) (1.16.0)
Requirement already satisfied: pyserial>=3.4 in /home/openwb/.local/lib/python3.9/site-packages (from pymodbus==2.5.2->-r /var/www/html/openWB/requirements.txt (line 4)) (3.5)
Requirement already satisfied: pyasn1 in /home/openwb/.local/lib/python3.9/site-packages (from pysmb==1.2.9.1->-r /var/www/html/openWB/requirements.txt (line 21)) (0.5.1)
Requirement already satisfied: tqdm in /home/openwb/.local/lib/python3.9/site-packages (from pysmb==1.2.9.1->-r /var/www/html/openWB/requirements.txt (line 21)) (4.66.1)
Requirement already satisfied: py>=1.8.2 in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.11.0)
Requirement already satisfied: pluggy<2.0,>=0.12 in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.0.0)
Requirement already satisfied: iniconfig in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.1.1)
Requirement already satisfied: toml in /usr/lib/python3/dist-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (0.10.1)
Requirement already satisfied: packaging in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (21.3)
Requirement already satisfied: pycparser in /home/openwb/.local/lib/python3.9/site-packages (from cffi>=1.12->cryptography==42.0.4->-r /var/www/html/openWB/requirements.txt (line 17)) (2.21)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (2.10)
Requirement already satisfied: soupsieve>1.2 in /home/openwb/.local/lib/python3.9/site-packages (from beautifulsoup4->bs4==0.0.1->-r /var/www/html/openWB/requirements.txt (line 12)) (2.3.2.post1)
Requirement already satisfied: sniffio in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.3.1)
Requirement already satisfied: httpcore==1.* in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.0.5)
Requirement already satisfied: anyio in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (4.4.0)
Requirement already satisfied: certifi in /usr/lib/python3/dist-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (2020.6.20)
Requirement already satisfied: h11<0.15,>=0.13 in /home/openwb/.local/lib/python3.9/site-packages (from httpcore==1.*->httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (0.14.0)
Requirement already satisfied: exceptiongroup>=1.0.2 in /home/openwb/.local/lib/python3.9/site-packages (from anyio->httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.2.1)
Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/openwb/.local/lib/python3.9/site-packages (from packaging->pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (3.0.9)
done
load versions...
chgrp: Zugriff auf '/var/www/html/openWB/data/restore/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chgrp: Zugriff auf '/var/www/html/openWB/data/data_migration/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chmod: Zugriff auf '/var/www/html/openWB/data/restore/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chmod: Zugriff auf '/var/www/html/openWB/data/data_migration/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
2024-08-27 17:59:07: boot done :-)
2024-08-27 17:59:09,816 - {root:179} - {DEBUG:MainThread} - Start openWB2.service
2024-08-27 17:59:09,818 - {helpermodules.update_config:525} - {DEBUG:MainThread} - Broker-Konfiguration aktualisieren
2024-08-27 17:59:10,955 - {helpermodules.update_config:612} - {DEBUG:MainThread} - current datastore version: 54
2024-08-27 17:59:10,956 - {helpermodules.update_config:613} - {DEBUG:MainThread} - target datastore version: 54
2024-08-27 17:59:11,406 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/heartbeat
2024-08-27 17:59:11,409 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/parentWB
2024-08-27 17:59:11,412 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/parentCPlp1
2024-08-27 17:59:11,414 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/Current
2024-08-27 17:59:11,417 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/backup_cloud/None/get/fault_str
2024-08-27 17:59:11,420 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/backup_cloud/None/get/fault_state
2024-08-27 17:59:11,603 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/voltages
2024-08-27 17:59:11,606 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/currents
2024-08-27 17:59:11,609 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/frequency
2024-08-27 17:59:11,612 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/power_factors
2024-08-27 17:59:11,615 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/imported
2024-08-27 17:59:20,774 - {root:75} - {INFO:MainThread} - # ***Start*** 
2024-08-27 17:59:20,774 - {helpermodules.setdata:46} - {DEBUG:Setdata} - Subdata initialization completed. Starting setdata loop to broker.
2024-08-27 17:59:20,780 - {modules.common.component_context:25} - {DEBUG:Subdata} - Update Komponente ['OneDrive']
2024-08-27 17:59:20,823 - {modules.common.component_context:54} - {DEBUG:device0} - Update Komponenten []
2024-08-27 17:59:20,824 - {modules.common.component_context:25} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:20,926 - {modules.loadvars:75} - {ERROR:MainThread} - Fehler im loadvars-Modul bei Element {'type': 'inverter', 'id': 3}
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/loadvars.py", line 69, in _update_values_of_level
    component = get_component_obj_by_id(element["id"], not_finished_threads)
  File "/var/www/html/openWB/packages/modules/common/utils/component_parser.py", line 32, in get_component_obj_by_id
    if module_data[f"{type_to_topic_mapping(type)}{id}"].data.get.fault_state == 2:
KeyError: 'pv3'
2024-08-27 17:59:20,938 - {modules.loadvars:75} - {ERROR:MainThread} - Fehler im loadvars-Modul bei Element {'type': 'bat', 'id': 5}
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/loadvars.py", line 69, in _update_values_of_level
    component = get_component_obj_by_id(element["id"], not_finished_threads)
  File "/var/www/html/openWB/packages/modules/common/utils/component_parser.py", line 32, in get_component_obj_by_id
    if module_data[f"{type_to_topic_mapping(type)}{id}"].data.get.fault_state == 2:
KeyError: 'bat5'
2024-08-27 17:59:20,940 - {modules.common.component_context:25} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:21,037 - {modules.common.utils.component_parser:33} - {ERROR:MainThread} - Fehlerstatus in Komponente LG ESS V1.0 Zähler. Werte werden nicht aktualisiert.
2024-08-27 17:59:21,067 - {modules.common.component_context:25} - {DEBUG:get ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:21,069 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:35} - {DEBUG:get ripple control receiver} - RSE-Kontakt 1: False, RSE-Kontakt 2: False
2024-08-27 17:59:21,070 - {modules.common.store._api:26} - {DEBUG:get ripple control receiver} - Raw data RcrState(override_value=100)
2024-08-27 17:59:21,075 - {modules.common.component_context:25} - {DEBUG:set ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:21,076 - {modules.common.store._api:31} - {INFO:set ripple control receiver} - Saving RcrState(override_value=100)
2024-08-27 17:59:21,252 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 1: [35.0, 35.0, 35.0]A
2024-08-27 17:59:21,264 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 1: 24000W
2024-08-27 17:59:21,268 - {control.chargepoint.chargepoint:83} - {INFO:MainThread} - LP 6: Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.
2024-08-27 17:59:21,276 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1724774284.4942179, power=7738.0, imported=4049963.7965801256, exported=82.9116493656238)
2024-08-27 17:59:21,279 - {modules.common.simcount._simcount:51} - {WARNING:MainThread} - Time difference between previous state and current state is too large. Set time difference to control interval.
2024-08-27 17:59:21,280 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00277778, power1: 7738, power2: 7738
2024-08-27 17:59:21,281 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 21.4944
2024-08-27 17:59:21,284 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 21.4944 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1724774361.2759526, power=7738.0, imported=4049985.29102457, exported=82.9116493656238)
2024-08-27 17:59:21,286 - {control.data:266} - {INFO:MainThread} - bat5
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=100, daily_exported=4103.0, daily_imported=8497.0, imported=1361537.04, exported=1136853.95, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0.0))
2024-08-27 17:59:21,290 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=0, daily_exported=4103.0, daily_imported=8497.0, fault_str='Bitte die Statusmeldungen der Speicher prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, imported=1361537.04, exported=1136853.95, power=0), set=Set(charging_power_left=0, regulate_up=False))
2024-08-27 17:59:21,294 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=0.0, daily_exported=0.0, power=0, imported=5354146.0, exported=0))
2024-08-27 17:59:21,297 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=74), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0.0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5354146.0, phases_in_use=0, plug_state=False, power=0, rfid_timestamp=None, rfid=None, serial_number='21262168', soc=None, soc_timestamp=None, state_str="Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.", vehicle_id=None, voltages=[240.21, 239.98, 240.63]), set=Set(charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=False, log=Log(chargemode_log_entry='_', costs=0, imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None, ev=-1, prio=False, rfid=None, serial_number=None, soc_at_start=None, soc_at_end=None, range_at_start=None, range_at_end=None), manual_lock=False, phases_to_use=3, plug_state_prev=False, plug_time=None, required_power=0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x6fb8f100>), config=Config(configuration={'mode': 'series', 'ip_address': 'localhost', 'duo_num': 0}, ev=1, name='Garage', type='internal_openwb', template=0, connected_phases=3, phase_1=1, auto_phase_switch_hw=True, control_pilot_interruption_hw=False, id=6))
2024-08-27 17:59:21,299 - {control.data:266} - {INFO:MainThread} - cpt0
CpTemplateData(autolock=Autolock(active=False, plans={'0': AutolockPlan(active=False, frequency=Frequency(selected='daily', once=['2021-11-01', '2021-11-05'], weekly=[False, False, False, False, False, False, False]), time=['06:00', '07:00'], name='Standard Autolock-Plan')}, wait_for_charging_end=False), id=0, max_current_multi_phases=16, max_current_single_phase=16, name='Standard Ladepunkt-Profil', disable_after_unplug=False, valid_tags=[])
2024-08-27 17:59:21,300 - {control.data:266} - {INFO:MainThread} - counter1
CounterData(config=Config(max_currents=[35, 35, 35], max_total_power=24000), get=Get(powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], frequency=50, daily_exported=27434.0, daily_imported=1882.0, imported=318564.0967209748, exported=2934568.4161055097, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0), set=Set(error_counter=5, reserved_surplus=0, released_surplus=0, raw_power_left=24000, raw_currents_left=[35.0, 35.0, 35.0], surplus_power_left=0))
2024-08-27 17:59:21,302 - {control.data:241} - {INFO:MainThread} - counter_all_data
CounterAllData(config=Config(home_consumption_source_id=None, reserve_for_not_charging=True), get=Get(hierarchy=[{'id': 1, 'type': 'counter', 'children': [{'id': 3, 'type': 'inverter', 'children': []}, {'id': 5, 'type': 'bat', 'children': []}, {'id': 6, 'type': 'cp', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=7738.0, smarthome_power_excluded_from_home_consumption=0, invalid_home_consumption=0, daily_yield_home_consumption=30550.0, imported_home_consumption=4049985.29102457, disengageable_smarthome_power=0))
2024-08-27 17:59:21,304 - {control.data:266} - {INFO:MainThread} - ct0
ChargeTemplateData(name='Standard-Lade-Profil', prio=False, load_default=False, et=Et(active=False, max_price=0.0002), time_charging=TimeCharging(active=False, plans={'0': TimeChargingPlan(active=False, frequency=Frequency(selected='once', once=['2021-11-01', '2021-11-05'], weekly=[False, False, False, False, False, False, False]), time=['06:00', '07:00'], name='Zeitladen-Standard', current=16, limit=Limit(selected='none', amount=1000, soc=50))}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(min_soc_current=6, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=6, limit=Limit(selected='soc', amount=1000, soc=95))))
2024-08-27 17:59:21,306 - {control.data:266} - {INFO:MainThread} - ev0
EvData(set=Set(soc_error_counter=1), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=None, soc_timestamp=None, force_soc_update=False, range=None, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,307 - {control.data:266} - {INFO:MainThread} - ev1
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Cupra Born', tag_id=[], get=Get(soc=74, soc_timestamp=1724773977.897841, force_soc_update=False, range=278, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,309 - {control.data:266} - {INFO:MainThread} - ev2
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=None, soc_timestamp=None, force_soc_update=False, range=None, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,310 - {control.data:266} - {INFO:MainThread} - et0
EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=32, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=18000, min_current=6, max_current_single_phase=20, battery_capacity=58000, efficiency=90, nominal_difference=1, keep_charge_active_duration=30)
2024-08-27 17:59:21,316 - {control.data:245} - {INFO:MainThread} - general_data
GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=3), phase_switch_delay=6, pv_charging=PvCharging(bat_power_reserve=1000, bat_power_reserve_active=True, control_range=[0, 230], feed_in_yield=0, phase_switch_delay=7, phases_to_use=0, bat_power_discharge=100, bat_power_discharge_active=False, min_bat_soc=50, bat_mode='bat_mode', switch_off_delay=30, switch_off_threshold=500, switch_on_delay=30, switch_on_threshold=500), retry_failed_phase_switches=True, scheduled_charging=ScheduledCharging(phases_to_use=0, phases_to_use_pv=0), time_charging=TimeCharging(phases_to_use=1), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='primary', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp=None, http_api=False, mqtt_bridge=False, prices=Prices(bat=0, cp=0, grid=0.000287, pv=7e-05), range_unit='km', ripple_control_receiver=RippleControlReceiver(get=RippleControlReceiverGet(fault_state=0, fault_str='Kein Fehler.', override_value=100), module={'name': 'GPIOs auf der AddOn-Platine', 'type': 'gpio', 'configuration': {}}, override_reference=<OverrideReference.CHARGEPOINT: 'chargepoint'>))
2024-08-27 17:59:21,318 - {control.data:246} - {INFO:MainThread} - general_data-display
primary
2024-08-27 17:59:21,319 - {control.data:247} - {INFO:MainThread} - graph_data
GraphData(config=Config(duration=120))
2024-08-27 17:59:21,323 - {control.data:248} - {INFO:MainThread} - optional_data
OptionalData(et=Et(get=EtGet(fault_state=0, fault_str='Kein Fehler.', prices={})), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=180, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x6fb82b38>), led=Led(active=False), rfid=Rfid(active=False))
2024-08-27 17:59:21,324 - {control.data:266} - {INFO:MainThread} - pv3
PvData(config=Config(max_ac_out=10000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=48493.0, monthly_exported=1520479.1749999998, yearly_exported=7581354.595585294, exported=7749118.943, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=-7738.0))
2024-08-27 17:59:21,326 - {control.data:250} - {INFO:MainThread} - pv_all_data
PvAllData(config=Config(configured=True), get=Get(daily_exported=48493.0, fault_str='Bitte die Statusmeldungen der Wechselrichter prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, monthly_exported=1520479.1749999998, yearly_exported=7581354.595585294, exported=7749118.943, power=0))
2024-08-27 17:59:21,327 - {control.data:266} - {INFO:MainThread} - system
{'update_in_progress': False, 'perform_update': False, 'backup_cloud': {'backup_before_update': True}, 'ip_address': '192.168.178.71', 'current_commit': '2024-08-27 12:16:39 +0200 [8a5a467c2]', 'current_branch': 'master', 'current_branch_commit': '2024-08-27 12:16:39 +0200 [8a5a467c2]', 'current_missing_commits': [], 'datastore_version': 54, 'dataprotection_acknowledged': True, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.5', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1724774284, 'time': '17:58:04', 'house-power': 7.738, 'charging-all': 0.0, 'pv-all': -0.0, 'cp6-power': 0.0, 'ev1-soc': 74, 'bat-all-power': 0.0, 'bat-all-soc': 0}, 'installAssistantDone': True, 'module_update_completed': True}
2024-08-27 17:59:21,330 - {control.data:279} - {INFO:MainThread} - device0
{'name': 'LG ESS V1.0', 'type': 'lg', 'id': 0, 'configuration': {'ip_address': '192.168.178.98', 'password': 'DE2201BKRE0250C0'}}
2024-08-27 17:59:21,333 - {control.data:281} - {INFO:MainThread} - component1
{'name': 'LG ESS V1.0 Zähler', 'type': 'counter', 'id': 1, 'configuration': {}}
2024-08-27 17:59:21,335 - {control.data:281} - {INFO:MainThread} - component3
{'name': 'LG ESS V1.0 Wechselrichter', 'type': 'inverter', 'id': 3, 'configuration': {}}
2024-08-27 17:59:21,337 - {control.data:281} - {INFO:MainThread} - component5
{'name': 'LG ESS V1.0 Speicher', 'type': 'bat', 'id': 5, 'configuration': {}}
2024-08-27 17:59:21,340 - {control.data:253} - {INFO:MainThread} - 

2024-08-27 17:59:21,341 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus
2024-08-27 17:59:21,343 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen**
2024-08-27 17:59:21,346 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Sollstrom setzen**
2024-08-27 17:59:21,349 - {control.counter:238} - {DEBUG:MainThread} - Anpassen des Regelbereichs 0W
2024-08-27 17:59:21,350 - {control.counter:501} - {DEBUG:MainThread} - Zähler 1: Begrenzung der verbleibenden Leistung auf 0W
2024-08-27 17:59:21,352 - {control.algorithm.algorithm:43} - {INFO:MainThread} - **Keine Leistung für PV-geführtes Laden übrig.**
2024-08-27 17:59:21,354 - {control.process:23} - {INFO:MainThread} - # Ladung starten.
2024-08-27 17:59:21,363 - {modules.common.component_context:25} - {DEBUG:set current cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:21,692 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/imported_home_consumption, Payload 4049985.29102457, vorherige Payload: 4049963.7965801256
2024-08-27 17:59:21,698 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/1/set/error_counter, Payload 5, vorherige Payload: 4
2024-08-27 17:59:25,712 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-08-27 17:59:30,727 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-08-27 17:59:30,728 - {root:56} - {DEBUG:MainThread} - Don't start multiple instances of smarthome thread.
2024-08-27 17:59:30,728 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={})
2024-08-27 17:59:30,729 - {root:75} - {INFO:MainThread} - # ***Start*** 
2024-08-27 17:59:30,760 - {modules.common.component_context:54} - {DEBUG:device0} - Update Komponenten ['LG ESS V1.0 Zähler', 'LG ESS V1.0 Wechselrichter', 'LG ESS V1.0 Speicher']
2024-08-27 17:59:30,772 - {urllib3.connectionpool:973} - {DEBUG:device0} - Starting new HTTPS connection (1): 192.168.178.98:443
2024-08-27 17:59:30,776 - {modules.common.component_context:25} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:32,056 - {urllib3.connectionpool:452} - {DEBUG:device0} - https://192.168.178.98:443 "POST /v1/user/essinfo/home HTTP/1.1" 405 None
2024-08-27 17:59:32,065 - {urllib3.connectionpool:973} - {DEBUG:device0} - Starting new HTTPS connection (2): 192.168.178.98:443
2024-08-27 17:59:34,110 - {helpermodules.utils._thread_handler:26} - {ERROR:MainThread} - device0 konnte nicht innerhalb des Timeouts die Werte abfragen, die abgefragten Werte werden nicht in der Regelung verwendet.
2024-08-27 17:59:34,111 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,112 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,113 - {modules.common.component_context:25} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:34,127 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,151 - {modules.common.component_context:25} - {DEBUG:get ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:34,153 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:35} - {DEBUG:get ripple control receiver} - RSE-Kontakt 1: False, RSE-Kontakt 2: False
2024-08-27 17:59:34,153 - {modules.common.store._api:26} - {DEBUG:get ripple control receiver} - Raw data RcrState(override_value=100)
2024-08-27 17:59:34,162 - {modules.common.component_context:25} - {DEBUG:set ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:34,164 - {modules.common.store._api:31} - {INFO:set ripple control receiver} - Saving RcrState(override_value=100)
2024-08-27 17:59:34,280 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 1: [35.0, 35.0, 35.0]A
2024-08-27 17:59:34,282 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 1: 24000W
2024-08-27 17:59:34,285 - {control.chargepoint.chargepoint:83} - {INFO:MainThread} - LP 6: Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.
2024-08-27 17:59:34,290 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1724774361.2759526, power=7738.0, imported=4049985.29102457, exported=82.9116493656238)
2024-08-27 17:59:34,293 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00361507, power1: 7738, power2: 7738
2024-08-27 17:59:34,298 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 27.9734
2024-08-27 17:59:34,299 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 27.9734 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1724774374.2902186, power=7738.0, imported=4050013.2644663523, exported=82.9116493656238)
2024-08-27 17:59:34,306 - {control.data:266} - {INFO:MainThread} - bat5
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=100, daily_exported=4103.0, daily_imported=8497.0, imported=1361537.04, exported=1136853.95, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0.0))
2024-08-27 17:59:34,308 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=0, daily_exported=4103.0, daily_imported=8497.0, fault_str='Bitte die Statusmeldungen der Speicher prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, imported=1361537.04, exported=1136853.95, power=0), set=Set(charging_power_left=0, regulate_up=False))
2024-08-27 17:59:34,309 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=0.0, daily_exported=0.0, power=0, imported=5354146.0, exported=0))
2024-08-27 17:59:34,311 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=74), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0.0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5354146.0, phases_in_use=0, plug_state=False, power=0, rfid_timestamp=None, rfid=None, serial_number='21262168', soc=None, soc_timestamp=None, state_str="Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.", vehicle_id=None, voltages=[240.27, 240.01, 240.29]), set=Set(charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=False, log=Log(chargemode_log_entry='_', costs=0, imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None, ev=-1, prio=False, rfid=None, serial_number=None, soc_at_start=None, soc_at_end=None, range_at_start=None, range_at_end=None), manual_lock=False, phases_to_use=3, plug_state_prev=False, plug_time=None, required_power=0, rfid=None, target_current=0, 
Vorher bei Master 2.1.5 Beta war das nicht so.
Kannst Du bitte ein Ticket öffnen? Ich würde mir das gerne per Remotesupport ansehen.
Sorry, aber wie und wo erstelle ich ein Ticket ;-(
13,8 kWp-Anlage LG + LG Batteriespeicher 10 kW
OpenWB Wallbox, Ver. 2.x (Master)
Cupra Born 58 kWh
Benutzeravatar
humschti
Beiträge: 647
Registriert: Mo Nov 25, 2019 8:25 am
Wohnort: Nürensdorf (Schweiz)
Has thanked: 3 times
Been thanked: 4 times

Re: Rückmeldungen 2.1.5 Release

Beitrag von humschti »

Einstellungen -> System -> Support
openWB Series 2 Duo mit EVU, 1/3 Umschaltung und abgesetztem Display, 16 kWp mit Solaredge, Ansteuerung Haushaltsgeräte mit Shelly
Tesla Model S und Cupra Born (SoC via EVCC)
Elchkopp
Beiträge: 721
Registriert: Fr Feb 04, 2022 6:19 pm
Has thanked: 8 times
Been thanked: 16 times

Re: Rückmeldungen 2.1.5 Release

Beitrag von Elchkopp »

Ich bin auf dem aktuellen Release 2.1.5 und konnte nun Logs ziehen von dem Problem, dass die Software im Speicher-Modus „Mindest-SoC des Speichers“ und einer eingestellten „Erlaubten Entladeleistung“ nicht das Limit bezüglich der „Maximalen Ausgangsleistung des Wechselrichters“ beachtet, sondern im Zweifel aus dem Netz zieht, wenn der Wechselrichter durch die Erzeugungsleistung und Entnahme aus der Batterie (DC) an die konfigurierte Grenze kommt:

Siehe hier ab 16:24 Uhr, dort habe ich den Modus von Fahrzeug-Prio auf Mindest-Soc umgestellt und er zieht konstant 1kW aus dem Netz:
Screenshot 2024-08-28 162658.png
(93.97 KiB) Noch nie heruntergeladen

Hier die Log-Datei dazu:
https://paste.openwb.de/m0dEYaWIlxpX9Iq

Ergänzung:
Die erlaubte Entladeleistung im Mindest-SoC-Modus ist mit 3kW konfiguriert
Die maximale Ausgangsleistung des WR ist mit 9,5kW konfiguriert und sollte demnach Berücksichtigung finden

Wechselrichter ist ein SolarEdge Hybrid-Wechselrichter SE10K-RWS mit einer angeschlossen BYD LVS 12kWh Batterie.

Gruß
Sascha
NeuenrothC
Beiträge: 88
Registriert: Sa Okt 30, 2021 5:22 am
Been thanked: 1 time

Re: Rückmeldungen 2.1.5 Release

Beitrag von NeuenrothC »

Ich habe immer noch das Problem, dass die OpenWB zu starke Schwankungen beim Laden aufweist. Dies ist seit 2.1.3 so.

Es wäre schön, wenn das mal auf die Liste an Themen kommt an denen gearbeitet wird.

Die Schwankungen der PV Leistung sind auch so nur in der OpenWB sichtbar, nicht in der SolarEdge App.

Das Regelinterval langsamer zu machen bringt auch keinen direkten Mehrwert, da dann zwar weniger Schwankungen auftauchen, diese aber immer noch so stark sind.



Mögliche Lösungen wären das Begrenzen der Stromänderung (aktuell 5A) oder, dass die Änderung gesetzt wird aus (Min, Max oder Mittelwert von 2 oder 3 regelzyklen)

Würde mich auch Bereiterklären das selbst zu implementieren, falls jemand mit den UI Änderungen hilft
Dateianhänge
IMG_5512.png
(382.43 KiB) Noch nie heruntergeladen
14,025 kWp, SolarEdge Hybrid-WR SE10K-RWS, LG Resu 10
Daphne
Beiträge: 88
Registriert: Do Sep 29, 2022 12:34 pm

Re: Rückmeldungen 2.1.5 Release

Beitrag von Daphne »

LenaK hat geschrieben: Mi Aug 28, 2024 9:09 am
Daphne hat geschrieben: Di Aug 27, 2024 4:55 pm Ich habe heute das Master 2.1.5 eingespielt.
Da tritt folgendes auf:
2024-08-27 18_48_40-openWB.jpg

Code: Alles auswählen

rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 420 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
Final group membership: openwb : openwb adm dialout cdrom sudo audio video plugdev games users input render netdev spi i2c gpio
Network...
Wait for connection...RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.RTNETLINK answers: Network is unreachable
.
my primary IP: 192.168.178.71
my primary interface: eth0
running as primary, enabling plug'n'play network
apt configuration already up to date
install required packages with 'apt-get'...
OK:1 http://archive.raspberrypi.org/debian bullseye InRelease
OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Paketlisten werden gelesen…
Paketlisten werden gelesen…
Abhängigkeitsbaum wird aufgebaut…
Statusinformationen werden eingelesen…
accountsservice ist schon die neueste Version (0.6.55-3).
apache2 ist schon die neueste Version (2.4.61-1~deb11u1).
bc ist schon die neueste Version (1.07.1-2+b1).
chromium ist schon die neueste Version (106.0.5249.119-1~deb11u1).
chromium-l10n ist schon die neueste Version (106.0.5249.119-1~deb11u1).
git ist schon die neueste Version (1:2.30.2-1+deb11u2).
jq ist schon die neueste Version (1.6-2.1).
libapache2-mod-php ist schon die neueste Version (2:7.4+76).
lightdm-autologin-greeter ist schon die neueste Version (1.0-3).
mmc-utils ist schon die neueste Version (0+git20180327.b4fe0c8c-1).
mosquitto ist schon die neueste Version (2.0.11-1+deb11u1).
mosquitto-clients ist schon die neueste Version (2.0.11-1+deb11u1).
openbox-lxde-session ist schon die neueste Version (0.99.2-4).
php ist schon die neueste Version (2:7.4+76).
php-curl ist schon die neueste Version (2:7.4+76).
php-gd ist schon die neueste Version (2:7.4+76).
php-json ist schon die neueste Version (2:7.4+76).
php-xml ist schon die neueste Version (2:7.4+76).
socat ist schon die neueste Version (1.7.4.1-3).
sshpass ist schon die neueste Version (1.09-1).
ssl-cert ist schon die neueste Version (1.1.0+nmu1).
sudo ist schon die neueste Version (1.9.5p2-3+deb11u1).
vim ist schon die neueste Version (2:8.2.2434-3+deb11u1).
x11-xserver-utils ist schon die neueste Version (7.7+8).
xserver-xorg ist schon die neueste Version (1:7.7+22).
lightdm ist schon die neueste Version (1.26.0-7+rpt1).
python3-pip ist schon die neueste Version (20.3.4-4+rpt1+deb11u1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 132 nicht aktualisiert.
done
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
install required python packages with 'pip3'...
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: typing-extensions==4.4.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 1)) (4.4.0)
Requirement already satisfied: jq==1.1.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 2)) (1.1.3)
Requirement already satisfied: paho_mqtt==1.6.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 3)) (1.6.1)
Requirement already satisfied: pymodbus==2.5.2 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 4)) (2.5.2)
Requirement already satisfied: pytest==6.2.5 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 5)) (6.2.5)
Requirement already satisfied: requests_mock==1.9.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 6)) (1.9.3)
Requirement already satisfied: lxml==4.9.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 7)) (4.9.1)
Requirement already satisfied: aiohttp==3.9.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 8)) (3.9.4)
Requirement already satisfied: schedule==1.1.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 9)) (1.1.0)
Requirement already satisfied: PyJWT==2.6.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 10)) (2.6.0)
Requirement already satisfied: ipparser==0.3.8 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 11)) (0.3.8)
Requirement already satisfied: bs4==0.0.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 12)) (0.0.1)
Requirement already satisfied: pkce==1.0.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 13)) (1.0.3)
Requirement already satisfied: evdev==1.5.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 15)) (1.5.0)
Requirement already satisfied: cryptography==42.0.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 17)) (42.0.4)
Requirement already satisfied: msal==1.27.0 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 18)) (1.27.0)
Requirement already satisfied: python-dateutil==2.8.2 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 19)) (2.8.2)
Requirement already satisfied: umodbus==1.0.4 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 20)) (1.0.4)
Requirement already satisfied: pysmb==1.2.9.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 21)) (1.2.9.1)
Requirement already satisfied: pytz==2023.3.post1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 22)) (2023.3.post1)
Requirement already satisfied: grpcio==1.60.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 23)) (1.60.1)
Requirement already satisfied: protobuf==4.25.3 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 24)) (4.25.3)
Requirement already satisfied: bimmer_connected==0.15.1 in /home/openwb/.local/lib/python3.9/site-packages (from -r /var/www/html/openWB/requirements.txt (line 25)) (0.15.1)
Requirement already satisfied: frozenlist>=1.1.1 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.4.1)
Requirement already satisfied: multidict<7.0,>=4.5 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (6.0.2)
Requirement already satisfied: attrs>=17.3.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (22.1.0)
Requirement already satisfied: aiosignal>=1.1.2 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.3.1)
Requirement already satisfied: yarl<2.0,>=1.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (1.8.1)
Requirement already satisfied: async-timeout<5.0,>=4.0 in /home/openwb/.local/lib/python3.9/site-packages (from aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (4.0.3)
Requirement already satisfied: httpx in /home/openwb/.local/lib/python3.9/site-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (0.27.0)
Requirement already satisfied: pycryptodome>=3.4 in /home/openwb/.local/lib/python3.9/site-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (3.20.0)
Requirement already satisfied: Pillow in /usr/lib/python3/dist-packages (from bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (8.1.2)
Requirement already satisfied: beautifulsoup4 in /home/openwb/.local/lib/python3.9/site-packages (from bs4==0.0.1->-r /var/www/html/openWB/requirements.txt (line 12)) (4.11.1)
Requirement already satisfied: cffi>=1.12 in /home/openwb/.local/lib/python3.9/site-packages (from cryptography==42.0.4->-r /var/www/html/openWB/requirements.txt (line 17)) (1.16.0)
Requirement already satisfied: dnspython in /home/openwb/.local/lib/python3.9/site-packages (from ipparser==0.3.8->-r /var/www/html/openWB/requirements.txt (line 11)) (2.3.0)
Requirement already satisfied: requests<3,>=2.0.0 in /usr/lib/python3/dist-packages (from msal==1.27.0->-r /var/www/html/openWB/requirements.txt (line 18)) (2.25.1)
Requirement already satisfied: six>=1.15.0 in /usr/lib/python3/dist-packages (from pymodbus==2.5.2->-r /var/www/html/openWB/requirements.txt (line 4)) (1.16.0)
Requirement already satisfied: pyserial>=3.4 in /home/openwb/.local/lib/python3.9/site-packages (from pymodbus==2.5.2->-r /var/www/html/openWB/requirements.txt (line 4)) (3.5)
Requirement already satisfied: pyasn1 in /home/openwb/.local/lib/python3.9/site-packages (from pysmb==1.2.9.1->-r /var/www/html/openWB/requirements.txt (line 21)) (0.5.1)
Requirement already satisfied: tqdm in /home/openwb/.local/lib/python3.9/site-packages (from pysmb==1.2.9.1->-r /var/www/html/openWB/requirements.txt (line 21)) (4.66.1)
Requirement already satisfied: py>=1.8.2 in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.11.0)
Requirement already satisfied: pluggy<2.0,>=0.12 in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.0.0)
Requirement already satisfied: iniconfig in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (1.1.1)
Requirement already satisfied: toml in /usr/lib/python3/dist-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (0.10.1)
Requirement already satisfied: packaging in /home/openwb/.local/lib/python3.9/site-packages (from pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (21.3)
Requirement already satisfied: pycparser in /home/openwb/.local/lib/python3.9/site-packages (from cffi>=1.12->cryptography==42.0.4->-r /var/www/html/openWB/requirements.txt (line 17)) (2.21)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp==3.9.4->-r /var/www/html/openWB/requirements.txt (line 8)) (2.10)
Requirement already satisfied: soupsieve>1.2 in /home/openwb/.local/lib/python3.9/site-packages (from beautifulsoup4->bs4==0.0.1->-r /var/www/html/openWB/requirements.txt (line 12)) (2.3.2.post1)
Requirement already satisfied: sniffio in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.3.1)
Requirement already satisfied: httpcore==1.* in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.0.5)
Requirement already satisfied: anyio in /home/openwb/.local/lib/python3.9/site-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (4.4.0)
Requirement already satisfied: certifi in /usr/lib/python3/dist-packages (from httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (2020.6.20)
Requirement already satisfied: h11<0.15,>=0.13 in /home/openwb/.local/lib/python3.9/site-packages (from httpcore==1.*->httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (0.14.0)
Requirement already satisfied: exceptiongroup>=1.0.2 in /home/openwb/.local/lib/python3.9/site-packages (from anyio->httpx->bimmer_connected==0.15.1->-r /var/www/html/openWB/requirements.txt (line 25)) (1.2.1)
Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/openwb/.local/lib/python3.9/site-packages (from packaging->pytest==6.2.5->-r /var/www/html/openWB/requirements.txt (line 5)) (3.0.9)
done
load versions...
chgrp: Zugriff auf '/var/www/html/openWB/data/restore/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chgrp: Zugriff auf '/var/www/html/openWB/data/data_migration/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chmod: Zugriff auf '/var/www/html/openWB/data/restore/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
chmod: Zugriff auf '/var/www/html/openWB/data/data_migration/*' nicht möglich: Datei oder Verzeichnis nicht gefunden
2024-08-27 17:59:07: boot done :-)
2024-08-27 17:59:09,816 - {root:179} - {DEBUG:MainThread} - Start openWB2.service
2024-08-27 17:59:09,818 - {helpermodules.update_config:525} - {DEBUG:MainThread} - Broker-Konfiguration aktualisieren
2024-08-27 17:59:10,955 - {helpermodules.update_config:612} - {DEBUG:MainThread} - current datastore version: 54
2024-08-27 17:59:10,956 - {helpermodules.update_config:613} - {DEBUG:MainThread} - target datastore version: 54
2024-08-27 17:59:11,406 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/heartbeat
2024-08-27 17:59:11,409 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/parentWB
2024-08-27 17:59:11,412 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/parentCPlp1
2024-08-27 17:59:11,414 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/isss/Current
2024-08-27 17:59:11,417 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/backup_cloud/None/get/fault_str
2024-08-27 17:59:11,420 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/set/backup_cloud/None/get/fault_state
2024-08-27 17:59:11,603 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/voltages
2024-08-27 17:59:11,606 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/currents
2024-08-27 17:59:11,609 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/frequency
2024-08-27 17:59:11,612 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/power_factors
2024-08-27 17:59:11,615 - {helpermodules.update_config:569} - {DEBUG:MainThread} - Ungültiges Topic zum Startzeitpunkt: openWB/internal_chargepoint/0/get/imported
2024-08-27 17:59:20,774 - {root:75} - {INFO:MainThread} - # ***Start*** 
2024-08-27 17:59:20,774 - {helpermodules.setdata:46} - {DEBUG:Setdata} - Subdata initialization completed. Starting setdata loop to broker.
2024-08-27 17:59:20,780 - {modules.common.component_context:25} - {DEBUG:Subdata} - Update Komponente ['OneDrive']
2024-08-27 17:59:20,823 - {modules.common.component_context:54} - {DEBUG:device0} - Update Komponenten []
2024-08-27 17:59:20,824 - {modules.common.component_context:25} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:20,926 - {modules.loadvars:75} - {ERROR:MainThread} - Fehler im loadvars-Modul bei Element {'type': 'inverter', 'id': 3}
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/loadvars.py", line 69, in _update_values_of_level
    component = get_component_obj_by_id(element["id"], not_finished_threads)
  File "/var/www/html/openWB/packages/modules/common/utils/component_parser.py", line 32, in get_component_obj_by_id
    if module_data[f"{type_to_topic_mapping(type)}{id}"].data.get.fault_state == 2:
KeyError: 'pv3'
2024-08-27 17:59:20,938 - {modules.loadvars:75} - {ERROR:MainThread} - Fehler im loadvars-Modul bei Element {'type': 'bat', 'id': 5}
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/loadvars.py", line 69, in _update_values_of_level
    component = get_component_obj_by_id(element["id"], not_finished_threads)
  File "/var/www/html/openWB/packages/modules/common/utils/component_parser.py", line 32, in get_component_obj_by_id
    if module_data[f"{type_to_topic_mapping(type)}{id}"].data.get.fault_state == 2:
KeyError: 'bat5'
2024-08-27 17:59:20,940 - {modules.common.component_context:25} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:21,037 - {modules.common.utils.component_parser:33} - {ERROR:MainThread} - Fehlerstatus in Komponente LG ESS V1.0 Zähler. Werte werden nicht aktualisiert.
2024-08-27 17:59:21,067 - {modules.common.component_context:25} - {DEBUG:get ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:21,069 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:35} - {DEBUG:get ripple control receiver} - RSE-Kontakt 1: False, RSE-Kontakt 2: False
2024-08-27 17:59:21,070 - {modules.common.store._api:26} - {DEBUG:get ripple control receiver} - Raw data RcrState(override_value=100)
2024-08-27 17:59:21,075 - {modules.common.component_context:25} - {DEBUG:set ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:21,076 - {modules.common.store._api:31} - {INFO:set ripple control receiver} - Saving RcrState(override_value=100)
2024-08-27 17:59:21,252 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 1: [35.0, 35.0, 35.0]A
2024-08-27 17:59:21,264 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 1: 24000W
2024-08-27 17:59:21,268 - {control.chargepoint.chargepoint:83} - {INFO:MainThread} - LP 6: Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.
2024-08-27 17:59:21,276 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1724774284.4942179, power=7738.0, imported=4049963.7965801256, exported=82.9116493656238)
2024-08-27 17:59:21,279 - {modules.common.simcount._simcount:51} - {WARNING:MainThread} - Time difference between previous state and current state is too large. Set time difference to control interval.
2024-08-27 17:59:21,280 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00277778, power1: 7738, power2: 7738
2024-08-27 17:59:21,281 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 21.4944
2024-08-27 17:59:21,284 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 21.4944 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1724774361.2759526, power=7738.0, imported=4049985.29102457, exported=82.9116493656238)
2024-08-27 17:59:21,286 - {control.data:266} - {INFO:MainThread} - bat5
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=100, daily_exported=4103.0, daily_imported=8497.0, imported=1361537.04, exported=1136853.95, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0.0))
2024-08-27 17:59:21,290 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=0, daily_exported=4103.0, daily_imported=8497.0, fault_str='Bitte die Statusmeldungen der Speicher prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, imported=1361537.04, exported=1136853.95, power=0), set=Set(charging_power_left=0, regulate_up=False))
2024-08-27 17:59:21,294 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=0.0, daily_exported=0.0, power=0, imported=5354146.0, exported=0))
2024-08-27 17:59:21,297 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=74), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0.0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5354146.0, phases_in_use=0, plug_state=False, power=0, rfid_timestamp=None, rfid=None, serial_number='21262168', soc=None, soc_timestamp=None, state_str="Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.", vehicle_id=None, voltages=[240.21, 239.98, 240.63]), set=Set(charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=False, log=Log(chargemode_log_entry='_', costs=0, imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None, ev=-1, prio=False, rfid=None, serial_number=None, soc_at_start=None, soc_at_end=None, range_at_start=None, range_at_end=None), manual_lock=False, phases_to_use=3, plug_state_prev=False, plug_time=None, required_power=0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x6fb8f100>), config=Config(configuration={'mode': 'series', 'ip_address': 'localhost', 'duo_num': 0}, ev=1, name='Garage', type='internal_openwb', template=0, connected_phases=3, phase_1=1, auto_phase_switch_hw=True, control_pilot_interruption_hw=False, id=6))
2024-08-27 17:59:21,299 - {control.data:266} - {INFO:MainThread} - cpt0
CpTemplateData(autolock=Autolock(active=False, plans={'0': AutolockPlan(active=False, frequency=Frequency(selected='daily', once=['2021-11-01', '2021-11-05'], weekly=[False, False, False, False, False, False, False]), time=['06:00', '07:00'], name='Standard Autolock-Plan')}, wait_for_charging_end=False), id=0, max_current_multi_phases=16, max_current_single_phase=16, name='Standard Ladepunkt-Profil', disable_after_unplug=False, valid_tags=[])
2024-08-27 17:59:21,300 - {control.data:266} - {INFO:MainThread} - counter1
CounterData(config=Config(max_currents=[35, 35, 35], max_total_power=24000), get=Get(powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], frequency=50, daily_exported=27434.0, daily_imported=1882.0, imported=318564.0967209748, exported=2934568.4161055097, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0), set=Set(error_counter=5, reserved_surplus=0, released_surplus=0, raw_power_left=24000, raw_currents_left=[35.0, 35.0, 35.0], surplus_power_left=0))
2024-08-27 17:59:21,302 - {control.data:241} - {INFO:MainThread} - counter_all_data
CounterAllData(config=Config(home_consumption_source_id=None, reserve_for_not_charging=True), get=Get(hierarchy=[{'id': 1, 'type': 'counter', 'children': [{'id': 3, 'type': 'inverter', 'children': []}, {'id': 5, 'type': 'bat', 'children': []}, {'id': 6, 'type': 'cp', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=7738.0, smarthome_power_excluded_from_home_consumption=0, invalid_home_consumption=0, daily_yield_home_consumption=30550.0, imported_home_consumption=4049985.29102457, disengageable_smarthome_power=0))
2024-08-27 17:59:21,304 - {control.data:266} - {INFO:MainThread} - ct0
ChargeTemplateData(name='Standard-Lade-Profil', prio=False, load_default=False, et=Et(active=False, max_price=0.0002), time_charging=TimeCharging(active=False, plans={'0': TimeChargingPlan(active=False, frequency=Frequency(selected='once', once=['2021-11-01', '2021-11-05'], weekly=[False, False, False, False, False, False, False]), time=['06:00', '07:00'], name='Zeitladen-Standard', current=16, limit=Limit(selected='none', amount=1000, soc=50))}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(min_soc_current=6, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=6, limit=Limit(selected='soc', amount=1000, soc=95))))
2024-08-27 17:59:21,306 - {control.data:266} - {INFO:MainThread} - ev0
EvData(set=Set(soc_error_counter=1), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=None, soc_timestamp=None, force_soc_update=False, range=None, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,307 - {control.data:266} - {INFO:MainThread} - ev1
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Cupra Born', tag_id=[], get=Get(soc=74, soc_timestamp=1724773977.897841, force_soc_update=False, range=278, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,309 - {control.data:266} - {INFO:MainThread} - ev2
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=None, soc_timestamp=None, force_soc_update=False, range=None, fault_state=0, fault_str='Kein Fehler.'))
2024-08-27 17:59:21,310 - {control.data:266} - {INFO:MainThread} - et0
EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=32, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=18000, min_current=6, max_current_single_phase=20, battery_capacity=58000, efficiency=90, nominal_difference=1, keep_charge_active_duration=30)
2024-08-27 17:59:21,316 - {control.data:245} - {INFO:MainThread} - general_data
GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=3), phase_switch_delay=6, pv_charging=PvCharging(bat_power_reserve=1000, bat_power_reserve_active=True, control_range=[0, 230], feed_in_yield=0, phase_switch_delay=7, phases_to_use=0, bat_power_discharge=100, bat_power_discharge_active=False, min_bat_soc=50, bat_mode='bat_mode', switch_off_delay=30, switch_off_threshold=500, switch_on_delay=30, switch_on_threshold=500), retry_failed_phase_switches=True, scheduled_charging=ScheduledCharging(phases_to_use=0, phases_to_use_pv=0), time_charging=TimeCharging(phases_to_use=1), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='primary', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp=None, http_api=False, mqtt_bridge=False, prices=Prices(bat=0, cp=0, grid=0.000287, pv=7e-05), range_unit='km', ripple_control_receiver=RippleControlReceiver(get=RippleControlReceiverGet(fault_state=0, fault_str='Kein Fehler.', override_value=100), module={'name': 'GPIOs auf der AddOn-Platine', 'type': 'gpio', 'configuration': {}}, override_reference=<OverrideReference.CHARGEPOINT: 'chargepoint'>))
2024-08-27 17:59:21,318 - {control.data:246} - {INFO:MainThread} - general_data-display
primary
2024-08-27 17:59:21,319 - {control.data:247} - {INFO:MainThread} - graph_data
GraphData(config=Config(duration=120))
2024-08-27 17:59:21,323 - {control.data:248} - {INFO:MainThread} - optional_data
OptionalData(et=Et(get=EtGet(fault_state=0, fault_str='Kein Fehler.', prices={})), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=180, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x6fb82b38>), led=Led(active=False), rfid=Rfid(active=False))
2024-08-27 17:59:21,324 - {control.data:266} - {INFO:MainThread} - pv3
PvData(config=Config(max_ac_out=10000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=48493.0, monthly_exported=1520479.1749999998, yearly_exported=7581354.595585294, exported=7749118.943, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=-7738.0))
2024-08-27 17:59:21,326 - {control.data:250} - {INFO:MainThread} - pv_all_data
PvAllData(config=Config(configured=True), get=Get(daily_exported=48493.0, fault_str='Bitte die Statusmeldungen der Wechselrichter prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, monthly_exported=1520479.1749999998, yearly_exported=7581354.595585294, exported=7749118.943, power=0))
2024-08-27 17:59:21,327 - {control.data:266} - {INFO:MainThread} - system
{'update_in_progress': False, 'perform_update': False, 'backup_cloud': {'backup_before_update': True}, 'ip_address': '192.168.178.71', 'current_commit': '2024-08-27 12:16:39 +0200 [8a5a467c2]', 'current_branch': 'master', 'current_branch_commit': '2024-08-27 12:16:39 +0200 [8a5a467c2]', 'current_missing_commits': [], 'datastore_version': 54, 'dataprotection_acknowledged': True, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.5', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1724774284, 'time': '17:58:04', 'house-power': 7.738, 'charging-all': 0.0, 'pv-all': -0.0, 'cp6-power': 0.0, 'ev1-soc': 74, 'bat-all-power': 0.0, 'bat-all-soc': 0}, 'installAssistantDone': True, 'module_update_completed': True}
2024-08-27 17:59:21,330 - {control.data:279} - {INFO:MainThread} - device0
{'name': 'LG ESS V1.0', 'type': 'lg', 'id': 0, 'configuration': {'ip_address': '192.168.178.98', 'password': 'DE2201BKRE0250C0'}}
2024-08-27 17:59:21,333 - {control.data:281} - {INFO:MainThread} - component1
{'name': 'LG ESS V1.0 Zähler', 'type': 'counter', 'id': 1, 'configuration': {}}
2024-08-27 17:59:21,335 - {control.data:281} - {INFO:MainThread} - component3
{'name': 'LG ESS V1.0 Wechselrichter', 'type': 'inverter', 'id': 3, 'configuration': {}}
2024-08-27 17:59:21,337 - {control.data:281} - {INFO:MainThread} - component5
{'name': 'LG ESS V1.0 Speicher', 'type': 'bat', 'id': 5, 'configuration': {}}
2024-08-27 17:59:21,340 - {control.data:253} - {INFO:MainThread} - 

2024-08-27 17:59:21,341 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus
2024-08-27 17:59:21,343 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen**
2024-08-27 17:59:21,346 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Sollstrom setzen**
2024-08-27 17:59:21,349 - {control.counter:238} - {DEBUG:MainThread} - Anpassen des Regelbereichs 0W
2024-08-27 17:59:21,350 - {control.counter:501} - {DEBUG:MainThread} - Zähler 1: Begrenzung der verbleibenden Leistung auf 0W
2024-08-27 17:59:21,352 - {control.algorithm.algorithm:43} - {INFO:MainThread} - **Keine Leistung für PV-geführtes Laden übrig.**
2024-08-27 17:59:21,354 - {control.process:23} - {INFO:MainThread} - # Ladung starten.
2024-08-27 17:59:21,363 - {modules.common.component_context:25} - {DEBUG:set current cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:21,692 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/imported_home_consumption, Payload 4049985.29102457, vorherige Payload: 4049963.7965801256
2024-08-27 17:59:21,698 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/1/set/error_counter, Payload 5, vorherige Payload: 4
2024-08-27 17:59:25,712 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-08-27 17:59:30,727 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-08-27 17:59:30,728 - {root:56} - {DEBUG:MainThread} - Don't start multiple instances of smarthome thread.
2024-08-27 17:59:30,728 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={})
2024-08-27 17:59:30,729 - {root:75} - {INFO:MainThread} - # ***Start*** 
2024-08-27 17:59:30,760 - {modules.common.component_context:54} - {DEBUG:device0} - Update Komponenten ['LG ESS V1.0 Zähler', 'LG ESS V1.0 Wechselrichter', 'LG ESS V1.0 Speicher']
2024-08-27 17:59:30,772 - {urllib3.connectionpool:973} - {DEBUG:device0} - Starting new HTTPS connection (1): 192.168.178.98:443
2024-08-27 17:59:30,776 - {modules.common.component_context:25} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:32,056 - {urllib3.connectionpool:452} - {DEBUG:device0} - https://192.168.178.98:443 "POST /v1/user/essinfo/home HTTP/1.1" 405 None
2024-08-27 17:59:32,065 - {urllib3.connectionpool:973} - {DEBUG:device0} - Starting new HTTPS connection (2): 192.168.178.98:443
2024-08-27 17:59:34,110 - {helpermodules.utils._thread_handler:26} - {ERROR:MainThread} - device0 konnte nicht innerhalb des Timeouts die Werte abfragen, die abgefragten Werte werden nicht in der Regelung verwendet.
2024-08-27 17:59:34,111 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,112 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,113 - {modules.common.component_context:25} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-08-27 17:59:34,127 - {modules.common.utils.component_parser:25} - {ERROR:MainThread} - Keine aktuellen Werte für Gerät LG ESS V1.0
2024-08-27 17:59:34,151 - {modules.common.component_context:25} - {DEBUG:get ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:34,153 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:35} - {DEBUG:get ripple control receiver} - RSE-Kontakt 1: False, RSE-Kontakt 2: False
2024-08-27 17:59:34,153 - {modules.common.store._api:26} - {DEBUG:get ripple control receiver} - Raw data RcrState(override_value=100)
2024-08-27 17:59:34,162 - {modules.common.component_context:25} - {DEBUG:set ripple control receiver} - Update Komponente ['GPIOs auf der AddOn-Platine']
2024-08-27 17:59:34,164 - {modules.common.store._api:31} - {INFO:set ripple control receiver} - Saving RcrState(override_value=100)
2024-08-27 17:59:34,280 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 1: [35.0, 35.0, 35.0]A
2024-08-27 17:59:34,282 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 1: 24000W
2024-08-27 17:59:34,285 - {control.chargepoint.chargepoint:83} - {INFO:MainThread} - LP 6: Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.
2024-08-27 17:59:34,290 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1724774361.2759526, power=7738.0, imported=4049985.29102457, exported=82.9116493656238)
2024-08-27 17:59:34,293 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00361507, power1: 7738, power2: 7738
2024-08-27 17:59:34,298 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 27.9734
2024-08-27 17:59:34,299 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 27.9734 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1724774374.2902186, power=7738.0, imported=4050013.2644663523, exported=82.9116493656238)
2024-08-27 17:59:34,306 - {control.data:266} - {INFO:MainThread} - bat5
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=100, daily_exported=4103.0, daily_imported=8497.0, imported=1361537.04, exported=1136853.95, fault_state=2, fault_str='OSError None: Unbekannter Fehler None', power=0.0))
2024-08-27 17:59:34,308 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=0, daily_exported=4103.0, daily_imported=8497.0, fault_str='Bitte die Statusmeldungen der Speicher prüfen. Es konnte kein aktueller Zählerstand ermittelt werden, da nicht alle Module Werte liefern.', fault_state=2, imported=1361537.04, exported=1136853.95, power=0), set=Set(charging_power_left=0, regulate_up=False))
2024-08-27 17:59:34,309 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=0.0, daily_exported=0.0, power=0, imported=5354146.0, exported=0))
2024-08-27 17:59:34,311 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=74), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0.0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5354146.0, phases_in_use=0, plug_state=False, power=0, rfid_timestamp=None, rfid=None, serial_number='21262168', soc=None, soc_timestamp=None, state_str="Ladepunkt gesperrt, da keine Werte vom EVU- oder Zwischenzähler-Zähler empfangen wurden und deshalb kein Lastmanagement durchgeführt werden kann. Bitte schaue auf der Status-Seite nach Fehlermeldungen bei den Zählern. Falls Du dennoch laden möchtest, kannst Du als Gerät 'Virtuelles Gerät' mit einer Komponente 'Virtueller Zähler' verwenden.", vehicle_id=None, voltages=[240.27, 240.01, 240.29]), set=Set(charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=False, log=Log(chargemode_log_entry='_', costs=0, imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None, ev=-1, prio=False, rfid=None, serial_number=None, soc_at_start=None, soc_at_end=None, range_at_start=None, range_at_end=None), manual_lock=False, phases_to_use=3, plug_state_prev=False, plug_time=None, required_power=0, rfid=None, target_current=0, 
Vorher bei Master 2.1.5 Beta war das nicht so.
Kannst Du bitte ein Ticket öffnen? Ich würde mir das gerne per Remotesupport ansehen.
Ticket habe ich gerade erstellt.
13,8 kWp-Anlage LG + LG Batteriespeicher 10 kW
OpenWB Wallbox, Ver. 2.x (Master)
Cupra Born 58 kWh
dlohnier
Beiträge: 30
Registriert: So Jun 27, 2021 12:33 pm

Re: Rückmeldungen 2.1.5 Release

Beitrag von dlohnier »

Ich habe auch Problem mit dem PV laden meines Tesla‘s.
Mit 1.9x hat das gut funktioniert, die Ladeleistung passte sich automatisch der PV Leistung an.

Mit 2.14 und leider auch jetzt der 2.15 leider nicht.
Die Ladeleistung bleibt deutlich (30-50%) unter der PV-Leistung.
So leider nicht mehr wirklich nutzbar, musste heute auf Sofortladen umstellen.
Schade, so etwas ist ein Basisfeature der openWB, wenn das nicht mehr funktioniert …

Hier im Screenshot zu sehen, gegen 14:30 habe ich sofortladen aktiviert
openWB-2.15-PV-Laden
openWB-2.15-PV-Laden
IMG_2363.jpeg (68.99 KiB) 1625 mal betrachtet
Gruß, Reinhold
Benutzeravatar
humschti
Beiträge: 647
Registriert: Mo Nov 25, 2019 8:25 am
Wohnort: Nürensdorf (Schweiz)
Has thanked: 3 times
Been thanked: 4 times

Re: Rückmeldungen 2.1.5 Release

Beitrag von humschti »

Und wieso postet du weder deine Konfiguration noch Logs?
openWB Series 2 Duo mit EVU, 1/3 Umschaltung und abgesetztem Display, 16 kWp mit Solaredge, Ansteuerung Haushaltsgeräte mit Shelly
Tesla Model S und Cupra Born (SoC via EVCC)
Basti
Beiträge: 78
Registriert: Di Feb 21, 2023 3:28 pm
Been thanked: 7 times

Re: Rückmeldungen 2.1.5 Release

Beitrag von Basti »

NeuenrothC hat geschrieben: Mi Aug 28, 2024 2:40 pm Ich habe immer noch das Problem, dass die OpenWB zu starke Schwankungen beim Laden aufweist. Dies ist seit 2.1.3 so.

Es wäre schön, wenn das mal auf die Liste an Themen kommt an denen gearbeitet wird.

Die Schwankungen der PV Leistung sind auch so nur in der OpenWB sichtbar, nicht in der SolarEdge App.

Das Regelinterval langsamer zu machen bringt auch keinen direkten Mehrwert, da dann zwar weniger Schwankungen auftauchen, diese aber immer noch so stark sind.



Mögliche Lösungen wären das Begrenzen der Stromänderung (aktuell 5A) oder, dass die Änderung gesetzt wird aus (Min, Max oder Mittelwert von 2 oder 3 regelzyklen)

Würde mich auch Bereiterklären das selbst zu implementieren, falls jemand mit den UI Änderungen hilft
Das Problem habe ich nicht mit solaredge / Tesla usw. Hier läuft alles wie es soll
Nasdero
Beiträge: 482
Registriert: Mo Dez 16, 2019 9:01 pm

Re: Rückmeldungen 2.1.5 Release

Beitrag von Nasdero »

NeuenrothC hat geschrieben: Mi Aug 28, 2024 2:40 pm Die Schwankungen der PV Leistung sind auch so nur in der OpenWB sichtbar, nicht in der SolarEdge App.
SolarEdge App, die ist nicht aktuell, wenn du aktuelle Werte haben willst, dann musst du sie schon selber bei SE abfragen, oder den Werten in der OpenWB vertrauen. Ich selber frage meine 3 SE Wechselrichter selber ab und stelle diese Werte gesammelt der openWB bereit und damit funktioniert das Regeln der openWB sehr gut. Eventuell könnte man das Abfragen der Werte in der openWB anders handhaben, aber das ist halt so gebaut, das es einfach zu konfigurieren ist. Wenn du es genauer haben möchtest, dann mit z.B. Note Red oder ähnliches.

Aber das habe ich dir schon einmal versucht klar zu machen: https://forum.openwb.de/viewtopic.php?p=114060#p114060
Antworten