Klingt logisch.
Der CP State wechselt nochmal. Es ist danach der selbe wie vorher. Das Fahrzeug ignoriert den aber.MatzeL hat geschrieben: ↑So Dez 03, 2023 10:42 amKlingt logisch.
Bleibt die Frage, wo ist der Unterschied im Prozess zwischen "Anstecken mit Sofortladen" und "Wechsel von Stopp zu Sofortladen".
Das wird hier im Thread aber wohl zu ot.
Wenn ich für die Frage noch Logs liefern soll, kann ich das gerne machen.
Code: Alles auswählen
2023-12-03 16:06:30,055 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-03 16:06:30,104 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 1: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 80, in get_values
plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
set_current, _, state_number = self.client.read_holding_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 123, in read_holding_registers
return self.__read_registers(
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 105, in __read_registers
raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 242, in update
state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 125, in get_values
raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)
2023-12-03 16:18:14,272 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 18
2023-12-03 16:18:14,321 - {modules.common.fault_state:55} - {ERROR:Internal Chargepoint} - Ladepunkt 1: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback:
Traceback (most recent call last):
File "/var/www/html/openWB/packages/modules/common/modbus.py", line 90, in __read_registers
raise FaultState.error(__name__+" "+str(response))Deine openWB ist nicht richtig angeschlossen. Bei einphasiger Ladung sollte die Leistung am Stromzähler des Ladepunkts auf L1 liegen. Bitte wende Dich mit Link auf diesen Forums-Beitrag an den Support.hominidae hat geschrieben: ↑Sa Dez 02, 2023 12:42 pm ...Series 2 DUO, 22kW.
Die Box beschränkt den Strom bei 1P laden auf 31A, obwohl im Lastmanagement 63A erlaubt sind, mit der Meldung, dass am EVU-Zähler die Stromstärke überschritten sei
31,2A sind deutlich weniger als 63A, nach meiner einfachen Rechnung
Code: Alles auswählen
2023-12-02 13:34:30,055 - {root:74} - {INFO:MainThread} - # ***Start*** 2023-12-02 13:34:30,089 - {modules.devices.victron.device:54} - {DEBUG:device0} - Start device reading {'component0': <modules.devices.victron.counter.VictronCounter object at 0x71e475b0>, 'component3': <modules.devices.victron.bat.VictronBat object at 0x714cae20>} 2023-12-02 13:34:30,090 - {modules.common.component_context:24} - {DEBUG:device0} - Update Komponente ['EVU Victron'] 2023-12-02 13:34:30,090 - {modules.devices.sma_sunny_boy.device:72} - {DEBUG:device1} - Start device reading {'component4': <modules.devices.sma_sunny_boy.inverter.SmaSunnyBoyInverter object at 0x71e3bec8>} 2023-12-02 13:34:30,094 - {modules.common.component_context:24} - {DEBUG:set values cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:30,095 - {modules.common.component_context:24} - {DEBUG:set values cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:30,102 - {modules.common.component_context:24} - {DEBUG:device1} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter'] 2023-12-02 13:34:30,147 - {modules.common.simcount._simcount:38} - {DEBUG:device0} - Previous state: SimCounterState(timestamp=1701520461.060132, power=6817, imported=1532546.161117137, exported=2002230.5328001236) 2023-12-02 13:34:30,150 - {modules.common.simcount._calculate:13} - {DEBUG:device0} - time passed: 0.0025243, power1: 6817, power2: 6768 2023-12-02 13:34:30,151 - {modules.common.simcount._calculate:29} - {DEBUG:device0} - power did not change sign. Total energy: 17.1463 2023-12-02 13:34:30,151 - {modules.common.simcount._simcount:47} - {DEBUG:device0} - imported: 17.1463 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520470.1476054, power=6768, imported=1532563.30741242, exported=2002230.5328001236) 2023-12-02 13:34:30,152 - {modules.common.store._api:26} - {DEBUG:device0} - Raw data CounterState(currents=[31.0, -1.1, 1.1], powers=[6770, -78, 76], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], imported=1532563.30741242, exported=2002230.5328001236, power=6768, frequency=50) 2023-12-02 13:34:30,156 - {modules.common.component_context:24} - {DEBUG:device0} - Update Komponente ['Speicher'] 2023-12-02 13:34:30,222 - {modules.common.simcount._simcount:38} - {DEBUG:device0} - Previous state: SimCounterState(timestamp=1701520461.1246948, power=562, imported=1162236.3262224467, exported=696324.494234256) 2023-12-02 13:34:30,224 - {modules.common.simcount._calculate:13} - {DEBUG:device0} - time passed: 0.00252717, power1: 562, power2: 502 2023-12-02 13:34:30,226 - {modules.common.simcount._calculate:29} - {DEBUG:device0} - power did not change sign. Total energy: 1.34446 2023-12-02 13:34:30,237 - {modules.common.simcount._simcount:47} - {DEBUG:device0} - imported: 1.34446 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520470.2225196, power=502, imported=1162237.6706787802, exported=696324.494234256) 2023-12-02 13:34:30,240 - {modules.common.store._api:26} - {DEBUG:device0} - Raw data BatState(imported=1162237.6706787802, exported=696324.494234256, power=502, soc=34) 2023-12-02 13:34:30,836 - {modules.devices.sma_sunny_boy.inverter:72} - {DEBUG:device1} - WR 192.168.15.111: InverterState(currents=[0.0, 0.0, 0.0], power=-1039, exported=69580039, dc_power=-1042) 2023-12-02 13:34:30,837 - {modules.common.store._api:26} - {DEBUG:device1} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-1039, exported=69580039, dc_power=-1042) 2023-12-02 13:34:30,848 - {modules.common.component_context:24} - {DEBUG:update values cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:30,854 - {modules.common.component_context:24} - {DEBUG:update values cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:30,861 - {modules.common.component_context:24} - {DEBUG:component3} - Update Komponente ['Speicher'] 2023-12-02 13:34:30,865 - {modules.common.store._api:30} - {INFO:component3} - Saving BatState(imported=1162237.6706787802, exported=696324.494234256, power=502, soc=34) 2023-12-02 13:34:30,870 - {modules.common.component_context:24} - {DEBUG:component4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter'] 2023-12-02 13:34:30,875 - {modules.common.store._api:26} - {DEBUG:component4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-1039, exported=69580039, dc_power=None) 2023-12-02 13:34:30,885 - {modules.common.store._api:30} - {INFO:component4} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-1039, exported=69580039, dc_power=None) 2023-12-02 13:34:30,954 - {modules.common.component_context:24} - {DEBUG:component0} - Update Komponente ['EVU Victron'] 2023-12-02 13:34:30,955 - {modules.common.store._api:30} - {INFO:component0} - Saving CounterState(currents=[31.0, -1.1, 1.1], powers=[6770, -78, 76], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], imported=1532563.30741242, exported=2002230.5328001236, power=6768, frequency=50) 2023-12-02 13:34:31,068 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/bat/get/imported, Payload 1162237.67, vorherige Payload: 1162236.33 2023-12-02 13:34:31,070 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/bat/get/power, Payload 502, vorherige Payload: 562 2023-12-02 13:34:31,075 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/2/control_parameter/limit, Payload , da der Maximal-Strom an Zähler {} erreicht ist., vorherige Payload: None 2023-12-02 13:34:31,289 - {control.bat_all:213} - {DEBUG:MainThread} - Verbleibende Speicher-Leistung: 502W 2023-12-02 13:34:31,290 - {control.bat_all:217} - {DEBUG:MainThread} - Reservierte Ladeleistung (1200W) subtrahieren: -698 2023-12-02 13:34:31,292 - {control.bat_all:173} - {INFO:MainThread} - -698W verbleibende Speicher-Leistung 2023-12-02 13:34:31,298 - {control.counter:138} - {INFO:MainThread} - Verbleibende Ströme an Zähler 0: [32.0, 64.1, 93.1]A 2023-12-02 13:34:31,300 - {control.counter:161} - {INFO:MainThread} - Verbleibende Leistung an Zähler 0: 42994.21W 2023-12-02 13:34:31,305 - {control.chargepoint.chargepoint:277} - {INFO:MainThread} - LP 1: Keine Ladung, da der Ladepunkt gesperrt wurde. 2023-12-02 13:34:31,309 - {control.chargepoint.chargepoint:699} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3 2023-12-02 13:34:31,318 - {control.chargepoint.chargepoint:898} - {INFO:MainThread} - LP 2, EV: IONIQ 5 (EV-Nr.2): Theoretisch benötigter Strom 32A, Lademodus instant_charging, Submodus: Chargemode.INSTANT_CHARGING, Phasen: 1, Priorität: True, max. Ist-Strom: 31.2 2023-12-02 13:34:31,327 - {modules.common.simcount._simcount:38} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1701520462.174197, power=469.1999999999998, imported=2628798.1739758984, exported=0) 2023-12-02 13:34:31,329 - {modules.common.simcount._calculate:13} - {DEBUG:MainThread} - time passed: 0.00254247, power1: 469.2, power2: 542.79 2023-12-02 13:34:31,337 - {modules.common.simcount._calculate:29} - {DEBUG:MainThread} - power did not change sign. Total energy: 1.28648 2023-12-02 13:34:31,339 - {modules.common.simcount._simcount:47} - {DEBUG:MainThread} - imported: 1.28648 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520471.3270805, power=542.79, imported=2628799.4604518157, exported=0) 2023-12-02 13:34:31,357 - {control.data:266} - {INFO:MainThread} - bat3 BatData(get=Get(soc=34, daily_exported=15.59, daily_imported=1578.77, imported=1162237.67, exported=696324.49, fault_state=0, fault_str='Kein Fehler.', power=502)) 2023-12-02 13:34:31,360 - {control.data:236} - {INFO:MainThread} - bat_all_data BatAllData(config=Config(configured=True), get=Get(soc=34, daily_exported=15.59, daily_imported=1578.77, fault_str='Kein Fehler.', fault_state=0, imported=1162237.67, exported=696324.49, power=502), set=Set(charging_power_left=-698, switch_on_soc_reached=False)) 2023-12-02 13:34:31,369 - {control.data:237} - {INFO:MainThread} - cp_all_data AllChargepointData(get=AllGet(daily_imported=14126.0, daily_exported=0, power=6762.21, imported=75955.0, exported=0)) 2023-12-02 13:34:31,372 - {control.data:266} - {INFO:MainThread} - cp1 ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=56), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=49324.0, phases_in_use=1, plug_state=True, power=0, rfid_timestamp=None, rfid=None, soc=None, soc_timestamp=None, state_str='Keine Ladung, da der Ladepunkt gesperrt wurde.', voltages=[227.89, 219.11, 227.36]), set=Set(change_ev_permitted=[True, ''], charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='_', imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None), manual_lock=True, phases_to_use=1, plug_state_prev=True, plug_time='12/02/2023, 12:46:12', required_power=0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x757f2f10>), config=Config(configuration={'mode': 'duo', 'ip_address': 'localhost', 'duo_num': 0}, ev=1, name='LP1 - Kabel', type='internal_openwb', template=1, connected_phases=3, phase_1=3, auto_phase_switch_hw=False, control_pilot_interruption_hw=False, id=1)) 2023-12-02 13:34:31,374 - {control.data:266} - {INFO:MainThread} - cp2 ChargepointData(control_parameter=ControlParameter(chargemode=<Chargemode.INSTANT_CHARGING: 'instant_charging'>, current_plan=None, imported_at_plan_start=None, imported_instant_charging=11994.0, limit=', da der Maximal-Strom an Zähler {} erreicht ist.', phases=1, prio=True, required_current=32, required_currents=[32, 0.0, 0.0], state=4, submode=<Chargemode.INSTANT_CHARGING: 'instant_charging'>, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=True, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=55.58), currents=[0.0, 0.0, 31.2], daily_imported=14126.0, daily_exported=0, evse_current=3170, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=26631.0, phases_in_use=1, plug_state=True, power=6762.21, rfid_timestamp=None, rfid=None, soc=None, soc_timestamp=None, state_str=None, voltages=[227.04, 227.73, 219.01]), set=Set(change_ev_permitted=[True, ''], charging_ev=2, charging_ev_prev=2, current=31.7, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='instant_charging', imported_at_mode_switch=11994.0, imported_at_plugtime=11994.0, imported_since_mode_switch=14622.0, imported_since_plugged=14622.0, range_charged=86.01176470588236, time_charged='2:09', timestamp_start_charging='12/02/2023, 11:25:11'), manual_lock=False, phases_to_use=1, plug_state_prev=True, plug_time='12/02/2023, 11:23:31', required_power=7360.0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x757a9130>), config=Config(configuration={'mode': 'duo', 'ip_address': 'localhost', 'duo_num': 1}, ev=2, name='LP2 - Buchse', type='internal_openwb', template=2, connected_phases=3, phase_1=1, auto_phase_switch_hw=False, control_pilot_interruption_hw=False, id=2)) 2023-12-02 13:34:31,380 - {control.data:266} - {INFO:MainThread} - cpt0 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=0, max_current_multi_phases=32, max_current_single_phase=32, name='Standard Ladepunkt-Profil', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:31,382 - {control.data:266} - {INFO:MainThread} - cpt1 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=1, max_current_multi_phases=32, max_current_single_phase=32, name='LP1 - Kabel', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:31,388 - {control.data:266} - {INFO:MainThread} - cpt2 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=2, max_current_multi_phases=32, max_current_single_phase=32, name='LP2 - Buchse', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:31,391 - {control.data:266} - {INFO:MainThread} - counter0 CounterData(config=Config(max_currents=[63, 63, 63], max_total_power=43000), get=Get(powers=[6770, -78, 76], currents=[31.0, -1.1, 1.1], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], unbalanced_load=0, frequency=50, daily_exported=21.9882844144, daily_imported=28547.5243262229, imported=1532563.30741242, exported=2002230.5328001236, fault_state=0, fault_str='Kein Fehler.', power=6768), set=Set(error_counter=0, reserved_surplus=0, released_surplus=0, raw_power_left=42994.21, raw_currents_left=[32.0, 64.1, 93.1], surplus_power_left=0, state_str='')) 2023-12-02 13:34:31,397 - {control.data:241} - {INFO:MainThread} - counter_all_data CounterAllData(config=Config(reserve_for_not_charging=False), get=Get(hierarchy=[{'id': 0, 'type': 'counter', 'children': [{'id': 1, 'type': 'cp', 'children': []}, {'id': 2, 'type': 'cp', 'children': []}, {'id': 3, 'type': 'bat', 'children': []}, {'id': 4, 'type': 'inverter', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=542.79, invalid_home_consumption=0, daily_yield_home_consumption=16819.7303615679, imported_home_consumption=2628799.4604518157, disengageable_smarthome_power=0)) 2023-12-02 13:34:31,402 - {control.data:266} - {INFO:MainThread} - ct0 ChargeTemplateData(name='Standard-Lade-Profil', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='stop', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=100), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=10, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:31,407 - {control.data:266} - {INFO:MainThread} - ct1 ChargeTemplateData(name='IONIQ', disable_after_unplug=True, prio=True, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='instant_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:31,408 - {control.data:266} - {INFO:MainThread} - ct2 ChargeTemplateData(name='IONIQ 5', disable_after_unplug=True, prio=True, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='instant_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:31,415 - {control.data:266} - {INFO:MainThread} - ev0 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=82000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp=None, force_soc_update=True, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:31,419 - {control.data:266} - {INFO:MainThread} - ev1 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='IONIQ', max_current_multi_phases=16, max_phases=1, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=12000, min_current=6, max_current_single_phase=32, battery_capacity=28000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=1, ev_template=1, name='IONIQ', tag_id=[], get=Get(soc=56, soc_timestamp='12/02/2023, 13:03:52', force_soc_update=False, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:31,423 - {control.data:266} - {INFO:MainThread} - ev2 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='IONIQ 5', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=72000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=2, ev_template=2, name='IONIQ 5', tag_id=[], get=Get(soc=56.28, soc_timestamp='12/02/2023, 13:34:25', force_soc_update=False, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:31,426 - {control.data:266} - {INFO:MainThread} - et0 EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=82000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:31,437 - {control.data:266} - {INFO:MainThread} - et1 EvTemplateData(name='IONIQ', max_current_multi_phases=16, max_phases=1, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=12000, min_current=6, max_current_single_phase=32, battery_capacity=28000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:31,450 - {control.data:266} - {INFO:MainThread} - et2 EvTemplateData(name='IONIQ 5', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=72000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:31,467 - {control.data:245} - {INFO:MainThread} - general_data GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=1), pv_charging=PvCharging(bat_prio=False, charging_power_reserve=1200, control_range=[0, 230], feed_in_yield=15000, phase_switch_delay=7, phases_to_use=1, rundown_power=0, rundown_soc=50, switch_off_delay=60, switch_off_soc=40, switch_off_threshold=50, switch_on_delay=30, switch_on_soc=60, switch_on_threshold=1500), scheduled_charging=ScheduledCharging(phases_to_use=0), time_charging=TimeCharging(phases_to_use=1), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='local', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp='', mqtt_bridge=False, price_kwh=0.3, range_unit='km', ripple_control_receiver=RippleControlReceiver(configured=False, r1_active=False, r2_active=False)) 2023-12-02 13:34:31,468 - {control.data:246} - {INFO:MainThread} - general_data-display local 2023-12-02 13:34:31,479 - {control.data:247} - {INFO:MainThread} - graph_data GraphData(config=Config(duration=120)) 2023-12-02 13:34:31,481 - {control.data:248} - {INFO:MainThread} - optional_data OptionalData(et=Et(active=False, config=EtConfig(max_price=0, provider={}), get=EtGet(price=0, price_list=[])), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=60, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x757a9058>), led=Led(active=False), rfid=Rfid(active=False)) 2023-12-02 13:34:31,482 - {control.data:266} - {INFO:MainThread} - pv4 PvData(config=Config(max_ac_out=20000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=3970, monthly_exported=0, yearly_exported=0, exported=69580039, fault_state=0, fault_str='Kein Fehler.', power=-1039)) 2023-12-02 13:34:31,486 - {control.data:250} - {INFO:MainThread} - pv_all_data PvAllData(config=Config(configured=True), get=Get(daily_exported=3970, monthly_exported=0, yearly_exported=0, exported=69580039, power=-1039)) 2023-12-02 13:34:31,489 - {control.data:266} - {INFO:MainThread} - system {'update_in_progress': False, 'perform_update': False, 'ip_address': '192.168.15.100', 'current_commit': '2023-11-30 12:30:45 +0100 [285f5a5fb]', 'current_branch': 'Release', 'current_branch_commit': '2023-11-30 12:30:45 +0100 [285f5a5fb]', 'current_missing_commits': [], 'datastore_version': 29, 'dataprotection_acknowledged': True, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.2-Patch.1', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1701520462, 'time': '13:34:22', 'grid': 6.817, 'house-power': 0.469, 'charging-all': 6.834, 'pv-all': 1.048, 'cp1-power': 0.0, 'cp2-power': 6.834, 'ev1-soc': 56, 'ev2-soc': 55.58, 'bat-all-power': 0.562, 'bat-all-soc': 34}, 'module_update_completed': True} 2023-12-02 13:34:31,492 - {control.data:279} - {INFO:MainThread} - device0 {'name': 'Victron', 'type': 'victron', 'id': 0, 'configuration': {'ip_address': '192.168.15.101'}} 2023-12-02 13:34:31,493 - {control.data:281} - {INFO:MainThread} - component0 {'name': 'EVU Victron', 'type': 'counter', 'id': 0, 'configuration': {'energy_meter': True, 'modbus_id': 31}} 2023-12-02 13:34:31,495 - {control.data:281} - {INFO:MainThread} - component3 {'name': 'Speicher', 'type': 'bat', 'id': 3, 'configuration': {'modbus_id': 100}} 2023-12-02 13:34:31,499 - {control.data:279} - {INFO:MainThread} - device1 {'name': 'SMA Sunny Boy', 'type': 'sma_sunny_boy', 'id': 1, 'configuration': {'ip_address': '192.168.15.111'}} 2023-12-02 13:34:31,500 - {control.data:281} - {INFO:MainThread} - component4 {'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'type': 'inverter', 'id': 4, 'configuration': {'hybrid': False, 'version': 0}} 2023-12-02 13:34:31,505 - {control.data:253} - {INFO:MainThread} - 2023-12-02 13:34:31,508 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus 2023-12-02 13:34:31,510 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen** 2023-12-02 13:34:31,517 - {control.algorithm.min_current:18} - {INFO:MainThread} - Mode-Tuple Chargemode.INSTANT_CHARGING - Chargemode.INSTANT_CHARGING - True, Zähler 0 2023-12-02 13:34:31,520 - {control.counter:169} - {DEBUG:MainThread} - Zähler 0: [26.0, 64.1, 93.1]A verbleibende Ströme, 41614.21W verbleibende Leistung 2023-12-02 13:34:31,534 - {control.algorithm.common:95} - {INFO:MainThread} - LP2: Stromstärke 6A 2023-12-02 13:34:31,540 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Sollstrom setzen** 2023-12-02 13:34:31,543 - {control.algorithm.filter_chargepoints:117} - {DEBUG:MainThread} - Geordnete Ladepunkte [2] 2023-12-02 13:34:31,546 - {control.algorithm.additional_current:26} - {INFO:MainThread} - Mode-Tuple Chargemode.INSTANT_CHARGING - Chargemode.INSTANT_CHARGING - True, Zähler 0 2023-12-02 13:34:31,549 - {control.counter:169} - {DEBUG:MainThread} - Zähler 0: [0.0, 64.1, 93.1]A verbleibende Ströme, 35634.21W verbleibende Leistung 2023-12-02 13:34:31,552 - {control.algorithm.common:95} - {INFO:MainThread} - LP2: Stromstärke 32A 2023-12-02 13:34:31,554 - {control.counter:211} - {INFO:MainThread} - Überschuss zur PV-geführten Ladung: 0W 2023-12-02 13:34:31,556 - {control.counter:457} - {DEBUG:MainThread} - Zähler 0: Begrenzung der verbleibenden Leistung auf 0W 2023-12-02 13:34:31,558 - {control.algorithm.algorithm:43} - {INFO:MainThread} - **Keine Leistung für PV-geführtes Laden übrig.** 2023-12-02 13:34:31,560 - {control.process:23} - {INFO:MainThread} - # Ladung starten. 2023-12-02 13:34:31,566 - {control.chargelog:52} - {DEBUG:MainThread} - imported_since_mode_switch 14637.0 counter 26631.0 2023-12-02 13:34:31,576 - {control.process:111} - {INFO:MainThread} - LP2: set current 32 A, state CHARGING_ALLOWED 2023-12-02 13:34:31,581 - {modules.common.component_context:24} - {DEBUG:set current cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:31,590 - {modules.common.component_context:24} - {DEBUG:set current cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:31,658 - {control.counter:186} - {INFO:MainThread} - 0W reservierte EVU-Leistung, 0W freigegebene EVU-Leistung 2023-12-02 13:34:32,243 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/2/control_parameter/limit, Payload None, vorherige Payload: , da der Maximal-Strom an Zähler {} erreicht ist. 2023-12-02 13:34:32,322 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={}) 2023-12-02 13:34:35,348 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={}) 2023-12-02 13:34:40,363 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={}) 2023-12-02 13:34:40,364 - {root:74} - {INFO:MainThread} - # ***Start*** 2023-12-02 13:34:40,397 - {modules.devices.victron.device:54} - {DEBUG:device0} - Start device reading {'component0': <modules.devices.victron.counter.VictronCounter object at 0x71e475b0>, 'component3': <modules.devices.victron.bat.VictronBat object at 0x714cae20>} 2023-12-02 13:34:40,402 - {modules.devices.sma_sunny_boy.device:72} - {DEBUG:device1} - Start device reading {'component4': <modules.devices.sma_sunny_boy.inverter.SmaSunnyBoyInverter object at 0x71e3bec8>} 2023-12-02 13:34:40,403 - {modules.common.component_context:24} - {DEBUG:device0} - Update Komponente ['EVU Victron'] 2023-12-02 13:34:40,404 - {modules.common.component_context:24} - {DEBUG:set values cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:40,405 - {modules.common.component_context:24} - {DEBUG:set values cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:40,408 - {modules.common.component_context:24} - {DEBUG:device1} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter'] 2023-12-02 13:34:40,468 - {modules.common.simcount._simcount:38} - {DEBUG:device0} - Previous state: SimCounterState(timestamp=1701520470.1476054, power=6768, imported=1532563.30741242, exported=2002230.5328001236) 2023-12-02 13:34:40,469 - {modules.common.simcount._calculate:13} - {DEBUG:device0} - time passed: 0.00286695, power1: 6768, power2: 6859 2023-12-02 13:34:40,469 - {modules.common.simcount._calculate:29} - {DEBUG:device0} - power did not change sign. Total energy: 19.5339 2023-12-02 13:34:40,470 - {modules.common.simcount._simcount:47} - {DEBUG:device0} - imported: 19.5339 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520480.4686081, power=6859, imported=1532582.8413435435, exported=2002230.5328001236) 2023-12-02 13:34:40,471 - {modules.common.store._api:26} - {DEBUG:device0} - Raw data CounterState(currents=[31.2, -1.1, 1.1], powers=[6848, -79, 90], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], imported=1532582.8413435435, exported=2002230.5328001236, power=6859, frequency=50) 2023-12-02 13:34:40,474 - {modules.common.component_context:24} - {DEBUG:device0} - Update Komponente ['Speicher'] 2023-12-02 13:34:40,486 - {modules.common.simcount._simcount:38} - {DEBUG:device0} - Previous state: SimCounterState(timestamp=1701520470.2225196, power=502, imported=1162237.6706787802, exported=696324.494234256) 2023-12-02 13:34:40,487 - {modules.common.simcount._calculate:13} - {DEBUG:device0} - time passed: 0.00285107, power1: 502, power2: 537 2023-12-02 13:34:40,488 - {modules.common.simcount._calculate:29} - {DEBUG:device0} - power did not change sign. Total energy: 1.48113 2023-12-02 13:34:40,488 - {modules.common.simcount._simcount:47} - {DEBUG:device0} - imported: 1.48113 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520480.486378, power=537, imported=1162239.1518105569, exported=696324.494234256) 2023-12-02 13:34:40,491 - {modules.common.store._api:26} - {DEBUG:device0} - Raw data BatState(imported=1162239.1518105569, exported=696324.494234256, power=537, soc=34) 2023-12-02 13:34:41,071 - {modules.devices.sma_sunny_boy.inverter:72} - {DEBUG:device1} - WR 192.168.15.111: InverterState(currents=[0.0, 0.0, 0.0], power=-1028, exported=69580042, dc_power=-1032) 2023-12-02 13:34:41,072 - {modules.common.store._api:26} - {DEBUG:device1} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-1028, exported=69580042, dc_power=-1032) 2023-12-02 13:34:41,082 - {modules.common.component_context:24} - {DEBUG:update values cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:41,089 - {modules.common.component_context:24} - {DEBUG:update values cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:41,094 - {modules.common.component_context:24} - {DEBUG:component3} - Update Komponente ['Speicher'] 2023-12-02 13:34:41,096 - {modules.common.store._api:30} - {INFO:component3} - Saving BatState(imported=1162239.1518105569, exported=696324.494234256, power=537, soc=34) 2023-12-02 13:34:41,098 - {modules.common.component_context:24} - {DEBUG:component4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter'] 2023-12-02 13:34:41,105 - {modules.common.store._api:26} - {DEBUG:component4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-1028, exported=69580042, dc_power=None) 2023-12-02 13:34:41,108 - {modules.common.store._api:30} - {INFO:component4} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-1028, exported=69580042, dc_power=None) 2023-12-02 13:34:41,172 - {modules.common.component_context:24} - {DEBUG:component0} - Update Komponente ['EVU Victron'] 2023-12-02 13:34:41,174 - {modules.common.store._api:30} - {INFO:component0} - Saving CounterState(currents=[31.2, -1.1, 1.1], powers=[6848, -79, 90], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], imported=1532582.8413435435, exported=2002230.5328001236, power=6859, frequency=50) 2023-12-02 13:34:41,279 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/bat/get/imported, Payload 1162239.15, vorherige Payload: 1162237.67 2023-12-02 13:34:41,281 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/bat/get/power, Payload 537, vorherige Payload: 502 2023-12-02 13:34:41,287 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/2/control_parameter/limit, Payload None, vorherige Payload: , da der Maximal-Strom an Zähler {} erreicht ist. 2023-12-02 13:34:41,491 - {control.bat_all:213} - {DEBUG:MainThread} - Verbleibende Speicher-Leistung: 537W 2023-12-02 13:34:41,493 - {control.bat_all:217} - {DEBUG:MainThread} - Reservierte Ladeleistung (1200W) subtrahieren: -663 2023-12-02 13:34:41,494 - {control.bat_all:173} - {INFO:MainThread} - -663W verbleibende Speicher-Leistung 2023-12-02 13:34:41,499 - {control.counter:138} - {INFO:MainThread} - Verbleibende Ströme an Zähler 0: [31.8, 64.1, 93.38]A 2023-12-02 13:34:41,501 - {control.counter:161} - {INFO:MainThread} - Verbleibende Leistung an Zähler 0: 42972.22W 2023-12-02 13:34:41,508 - {control.chargepoint.chargepoint:277} - {INFO:MainThread} - LP 1: Keine Ladung, da der Ladepunkt gesperrt wurde. 2023-12-02 13:34:41,511 - {control.chargepoint.chargepoint:699} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3 2023-12-02 13:34:41,520 - {control.chargepoint.chargepoint:898} - {INFO:MainThread} - LP 2, EV: IONIQ 5 (EV-Nr.2): Theoretisch benötigter Strom 32A, Lademodus instant_charging, Submodus: Chargemode.INSTANT_CHARGING, Phasen: 1, Priorität: True, max. Ist-Strom: 31.48 2023-12-02 13:34:41,553 - {modules.common.simcount._simcount:38} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1701520471.3270805, power=542.79, imported=2628799.4604518157, exported=0) 2023-12-02 13:34:41,558 - {modules.common.simcount._calculate:13} - {DEBUG:MainThread} - time passed: 0.00284073, power1: 542.79, power2: 518.78 2023-12-02 13:34:41,559 - {modules.common.simcount._calculate:29} - {DEBUG:MainThread} - power did not change sign. Total energy: 1.50781 2023-12-02 13:34:41,562 - {modules.common.simcount._simcount:47} - {DEBUG:MainThread} - imported: 1.50781 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1701520481.5536928, power=518.7799999999997, imported=2628800.968266378, exported=0) 2023-12-02 13:34:41,566 - {control.data:266} - {INFO:MainThread} - bat3 BatData(get=Get(soc=34, daily_exported=15.59, daily_imported=1578.77, imported=1162239.15, exported=696324.49, fault_state=0, fault_str='Kein Fehler.', power=537)) 2023-12-02 13:34:41,570 - {control.data:236} - {INFO:MainThread} - bat_all_data BatAllData(config=Config(configured=True), get=Get(soc=34, daily_exported=15.59, daily_imported=1578.77, fault_str='Kein Fehler.', fault_state=0, imported=1162239.15, exported=696324.49, power=537), set=Set(charging_power_left=-663, switch_on_soc_reached=False)) 2023-12-02 13:34:41,572 - {control.data:237} - {INFO:MainThread} - cp_all_data AllChargepointData(get=AllGet(daily_imported=14126.0, daily_exported=0, power=6831.22, imported=75976.0, exported=0)) 2023-12-02 13:34:41,575 - {control.data:266} - {INFO:MainThread} - cp1 ChargepointData(control_parameter=ControlParameter(chargemode='stop', current_plan=None, imported_at_plan_start=None, imported_instant_charging=None, limit=None, phases=0, prio=False, required_current=0, required_currents=[0.0, 0.0, 0.0], state=0, submode='stop', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=56), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0, evse_current=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=49324.0, phases_in_use=1, plug_state=True, power=0, rfid_timestamp=None, rfid=None, soc=None, soc_timestamp=None, state_str='Keine Ladung, da der Ladepunkt gesperrt wurde.', voltages=[227.89, 219.09, 227.48]), set=Set(change_ev_permitted=[True, ''], charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='_', imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None), manual_lock=True, phases_to_use=1, plug_state_prev=True, plug_time='12/02/2023, 12:46:12', required_power=0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x75795880>), config=Config(configuration={'mode': 'duo', 'ip_address': 'localhost', 'duo_num': 0}, ev=1, name='LP1 - Kabel', type='internal_openwb', template=1, connected_phases=3, phase_1=3, auto_phase_switch_hw=False, control_pilot_interruption_hw=False, id=1)) 2023-12-02 13:34:41,588 - {control.data:266} - {INFO:MainThread} - cp2 ChargepointData(control_parameter=ControlParameter(chargemode=<Chargemode.INSTANT_CHARGING: 'instant_charging'>, current_plan=None, imported_at_plan_start=None, imported_instant_charging=11994.0, limit=None, phases=1, prio=True, required_current=32, required_currents=[32, 0.0, 0.0], state=4, submode=<Chargemode.INSTANT_CHARGING: 'instant_charging'>, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=True, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=56.28), currents=[0.0, 0.0, 31.48], daily_imported=14126.0, daily_exported=0, evse_current=3200, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=26652.0, phases_in_use=1, plug_state=True, power=6831.22, rfid_timestamp=None, rfid=None, soc=None, soc_timestamp=None, state_str=None, voltages=[227.12, 227.8, 218.99]), set=Set(change_ev_permitted=[True, ''], charging_ev=2, charging_ev_prev=2, current=32, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='instant_charging', imported_at_mode_switch=11994.0, imported_at_plugtime=11994.0, imported_since_mode_switch=14637.0, imported_since_plugged=14637.0, range_charged=86.1, time_charged='2:09', timestamp_start_charging='12/02/2023, 11:25:11'), manual_lock=False, phases_to_use=1, plug_state_prev=True, plug_time='12/02/2023, 11:23:31', required_power=7360.0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x757f2e08>), config=Config(configuration={'mode': 'duo', 'ip_address': 'localhost', 'duo_num': 1}, ev=2, name='LP2 - Buchse', type='internal_openwb', template=2, connected_phases=3, phase_1=1, auto_phase_switch_hw=False, control_pilot_interruption_hw=False, id=2)) 2023-12-02 13:34:41,590 - {control.data:266} - {INFO:MainThread} - cpt0 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=0, max_current_multi_phases=32, max_current_single_phase=32, name='Standard Ladepunkt-Profil', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:41,594 - {control.data:266} - {INFO:MainThread} - cpt1 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=1, max_current_multi_phases=32, max_current_single_phase=32, name='LP1 - Kabel', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:41,597 - {control.data:266} - {INFO:MainThread} - cpt2 CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=2, max_current_multi_phases=32, max_current_single_phase=32, name='LP2 - Buchse', rfid_enabling=False, valid_tags=[]) 2023-12-02 13:34:41,604 - {control.data:266} - {INFO:MainThread} - counter0 CounterData(config=Config(max_currents=[63, 63, 63], max_total_power=43000), get=Get(powers=[6848, -79, 90], currents=[31.2, -1.1, 1.1], voltages=[221.5, 227.1, 227.9], power_factors=[0.0, 0.0, 0.0], unbalanced_load=0, frequency=50, daily_exported=21.9882844144, daily_imported=28547.5243262229, imported=1532582.8413435435, exported=2002230.5328001236, fault_state=0, fault_str='Kein Fehler.', power=6859), set=Set(error_counter=0, reserved_surplus=0, released_surplus=0, raw_power_left=42972.22, raw_currents_left=[31.8, 64.1, 93.38], surplus_power_left=0, state_str='')) 2023-12-02 13:34:41,607 - {control.data:241} - {INFO:MainThread} - counter_all_data CounterAllData(config=Config(reserve_for_not_charging=False), get=Get(hierarchy=[{'id': 0, 'type': 'counter', 'children': [{'id': 1, 'type': 'cp', 'children': []}, {'id': 2, 'type': 'cp', 'children': []}, {'id': 3, 'type': 'bat', 'children': []}, {'id': 4, 'type': 'inverter', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=518.7799999999997, invalid_home_consumption=0, daily_yield_home_consumption=16819.7303615679, imported_home_consumption=2628800.968266378, disengageable_smarthome_power=0)) 2023-12-02 13:34:41,613 - {control.data:266} - {INFO:MainThread} - ct0 ChargeTemplateData(name='Standard-Lade-Profil', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='stop', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=100), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=10, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:41,615 - {control.data:266} - {INFO:MainThread} - ct1 ChargeTemplateData(name='IONIQ', disable_after_unplug=True, prio=True, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='instant_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:41,618 - {control.data:266} - {INFO:MainThread} - ct2 ChargeTemplateData(name='IONIQ 5', disable_after_unplug=True, prio=True, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='instant_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, limit=Limit(selected='none', amount=1000, soc=50)))) 2023-12-02 13:34:41,625 - {control.data:266} - {INFO:MainThread} - ev0 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=82000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp=None, force_soc_update=True, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:41,629 - {control.data:266} - {INFO:MainThread} - ev1 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='IONIQ', max_current_multi_phases=16, max_phases=1, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=12000, min_current=6, max_current_single_phase=32, battery_capacity=28000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=1, ev_template=1, name='IONIQ', tag_id=[], get=Get(soc=56, soc_timestamp='12/02/2023, 13:03:52', force_soc_update=False, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:41,632 - {control.data:266} - {INFO:MainThread} - ev2 EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='IONIQ 5', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=72000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), charge_template=2, ev_template=2, name='IONIQ 5', tag_id=[], get=Get(soc=56.28, soc_timestamp='12/02/2023, 13:34:25', force_soc_update=False, range=0, fault_state=0, fault_str='Kein Fehler.')) 2023-12-02 13:34:41,633 - {control.data:266} - {INFO:MainThread} - et0 EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=82000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:41,642 - {control.data:266} - {INFO:MainThread} - et1 EvTemplateData(name='IONIQ', max_current_multi_phases=16, max_phases=1, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=12000, min_current=6, max_current_single_phase=32, battery_capacity=28000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:41,646 - {control.data:266} - {INFO:MainThread} - et2 EvTemplateData(name='IONIQ 5', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=72000, efficiency=90, nominal_difference=1, keep_charge_active_duration=40) 2023-12-02 13:34:41,647 - {control.data:245} - {INFO:MainThread} - general_data GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=1), pv_charging=PvCharging(bat_prio=False, charging_power_reserve=1200, control_range=[0, 230], feed_in_yield=15000, phase_switch_delay=7, phases_to_use=1, rundown_power=0, rundown_soc=50, switch_off_delay=60, switch_off_soc=40, switch_off_threshold=50, switch_on_delay=30, switch_on_soc=60, switch_on_threshold=1500), scheduled_charging=ScheduledCharging(phases_to_use=0), time_charging=TimeCharging(phases_to_use=1), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='local', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp='', mqtt_bridge=False, price_kwh=0.3, range_unit='km', ripple_control_receiver=RippleControlReceiver(configured=False, r1_active=False, r2_active=False)) 2023-12-02 13:34:41,652 - {control.data:246} - {INFO:MainThread} - general_data-display local 2023-12-02 13:34:41,673 - {control.data:247} - {INFO:MainThread} - graph_data GraphData(config=Config(duration=120)) 2023-12-02 13:34:41,682 - {control.data:248} - {INFO:MainThread} - optional_data OptionalData(et=Et(active=False, config=EtConfig(max_price=0, provider={}), get=EtGet(price=0, price_list=[])), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=60, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x757b10a0>), led=Led(active=False), rfid=Rfid(active=False)) 2023-12-02 13:34:41,684 - {control.data:266} - {INFO:MainThread} - pv4 PvData(config=Config(max_ac_out=20000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=3970, monthly_exported=0, yearly_exported=0, exported=69580042, fault_state=0, fault_str='Kein Fehler.', power=-1028)) 2023-12-02 13:34:41,686 - {control.data:250} - {INFO:MainThread} - pv_all_data PvAllData(config=Config(configured=True), get=Get(daily_exported=3970, monthly_exported=0, yearly_exported=0, exported=69580042, power=-1028)) 2023-12-02 13:34:41,689 - {control.data:266} - {INFO:MainThread} - system {'update_in_progress': False, 'perform_update': False, 'ip_address': '192.168.15.100', 'current_commit': '2023-11-30 12:30:45 +0100 [285f5a5fb]', 'current_branch': 'Release', 'current_branch_commit': '2023-11-30 12:30:45 +0100 [285f5a5fb]', 'current_missing_commits': [], 'datastore_version': 29, 'dataprotection_acknowledged': True, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.2-Patch.1', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1701520471, 'time': '13:34:31', 'grid': 6.768, 'house-power': 0.543, 'charging-all': 6.762, 'pv-all': 1.039, 'cp1-power': 0.0, 'cp2-power': 6.762, 'ev1-soc': 56, 'ev2-soc': 56.28, 'bat-all-power': 0.502, 'bat-all-soc': 34}, 'module_update_completed': True} 2023-12-02 13:34:41,692 - {control.data:279} - {INFO:MainThread} - device0 {'name': 'Victron', 'type': 'victron', 'id': 0, 'configuration': {'ip_address': '192.168.15.101'}} 2023-12-02 13:34:41,696 - {control.data:281} - {INFO:MainThread} - component0 {'name': 'EVU Victron', 'type': 'counter', 'id': 0, 'configuration': {'energy_meter': True, 'modbus_id': 31}} 2023-12-02 13:34:41,703 - {control.data:281} - {INFO:MainThread} - component3 {'name': 'Speicher', 'type': 'bat', 'id': 3, 'configuration': {'modbus_id': 100}} 2023-12-02 13:34:41,708 - {control.data:279} - {INFO:MainThread} - device1 {'name': 'SMA Sunny Boy', 'type': 'sma_sunny_boy', 'id': 1, 'configuration': {'ip_address': '192.168.15.111'}} 2023-12-02 13:34:41,710 - {control.data:281} - {INFO:MainThread} - component4 {'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'type': 'inverter', 'id': 4, 'configuration': {'hybrid': False, 'version': 0}} 2023-12-02 13:34:41,712 - {control.data:253} - {INFO:MainThread} - 2023-12-02 13:34:41,714 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus 2023-12-02 13:34:41,717 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen** 2023-12-02 13:34:41,721 - {control.algorithm.min_current:18} - {INFO:MainThread} - Mode-Tuple Chargemode.INSTANT_CHARGING - Chargemode.INSTANT_CHARGING - True, Zähler 0 2023-12-02 13:34:41,723 - {control.counter:169} - {DEBUG:MainThread} - Zähler 0: [25.8, 64.1, 93.38]A verbleibende Ströme, 41592.22W verbleibende Leistung 2023-12-02 13:34:41,726 - {control.algorithm.common:95} - {INFO:MainThread} - LP2: Stromstärke 6A 2023-12-02 13:34:41,731 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Sollstrom setzen** 2023-12-02 13:34:41,736 - {control.algorithm.filter_chargepoints:117} - {DEBUG:MainThread} - Geordnete Ladepunkte [2] 2023-12-02 13:34:41,739 - {control.algorithm.additional_current:26} - {INFO:MainThread} - Mode-Tuple Chargemode.INSTANT_CHARGING - Chargemode.INSTANT_CHARGING - True, Zähler 0 2023-12-02 13:34:41,743 - {control.loadmanagement:89} - {DEBUG:MainThread} - Stromüberschreitung [26.0, 0.0, 0.0]W korrigieren: [25.8, 0.0, 0.0] 2023-12-02 13:34:41,751 - {control.chargepoint.chargepoint:277} - {INFO:MainThread} - LP 2: Es kann nicht mit der vorgegebenen Stromstärke geladen werden, da der Maximal-Strom an Zähler EVU Victron erreicht ist. 2023-12-02 13:34:41,753 - {control.counter:169} - {DEBUG:MainThread} - Zähler 0: [0.0, 64.1, 93.38]A verbleibende Ströme, 35658.22W verbleibende Leistung 2023-12-02 13:34:41,757 - {control.algorithm.common:95} - {INFO:MainThread} - LP2: Stromstärke 31.8A 2023-12-02 13:34:41,772 - {control.counter:211} - {INFO:MainThread} - Überschuss zur PV-geführten Ladung: 0W 2023-12-02 13:34:41,775 - {control.counter:457} - {DEBUG:MainThread} - Zähler 0: Begrenzung der verbleibenden Leistung auf 0W 2023-12-02 13:34:41,776 - {control.algorithm.algorithm:43} - {INFO:MainThread} - **Keine Leistung für PV-geführtes Laden übrig.** 2023-12-02 13:34:41,786 - {control.process:23} - {INFO:MainThread} - # Ladung starten. 2023-12-02 13:34:41,803 - {control.chargelog:52} - {DEBUG:MainThread} - imported_since_mode_switch 14658.0 counter 26652.0 2023-12-02 13:34:41,809 - {control.process:111} - {INFO:MainThread} - LP2: set current 31.8 A, state CHARGING_ALLOWED 2023-12-02 13:34:41,814 - {modules.common.component_context:24} - {DEBUG:set current cp1} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:41,818 - {modules.common.component_context:24} - {DEBUG:set current cp2} - Update Komponente ['Ladepunkt'] 2023-12-02 13:34:41,870 - {control.counter:186} - {INFO:MainThread} - 0W reservierte EVU-Leistung, 0W freigegebene EVU-Leistung 2023-12-02 13:34:42,350 - {helpermodules.changed_values_handler:120} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/2/control_parameter/limit, Payload , da der Maximal-Strom an Zähler {} erreicht ist., vorherige Payload: None 2023-12-02 13:34:42,368 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={}) 2023-12-02 13:34:45,426 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={}) 2023-12-02 13:34:50,438 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={}) 2023-12-02 13:34:50,439 - {root:74} - {INFO:MainThread} - # ***Start***
Danke habe ich gemacht. Dabei habe ich meinen Elektiker sogar noch darauf hingewiesen, dass sie korrket (sie wurde überholt, also zuerst demontiert) wieder anzuschliessen sei.
Ich habe vermutlich das gleiche Thema, aber mit einem sonst so unzickigem Ioniq5 mit aktueller Software. Bei mir wurde jetzt mehrfach im Sofortladen die Ladung nicht gestartet, obwohl die OpenWB durchaus Strom angeboten hat. Ein Klick in der Fahrzeugapp mit "Jetzt Laden" startete dann die Ladung. Ebenso das Umschalten auf Stopp und dann wieder zurück in Sofortladen. Ich muss das mal weiter beobachten und melde mich, wenn ich mehr weiß. Bisher hatte ich nicht wirklich Muße, mich dem Thema zu widmen.
Das klingt wie das Problem, das ich auch beim Update auf meinem QNAP NAS habe:cjungde hat geschrieben: ↑Sa Dez 02, 2023 2:54 pm Hallo zusammen,
ich brauchte mal einen Tip um weiter zu kommen.
Meine Situation:
Ich habe (hatte) eine funktionierende OpenWB2.1 in einer virtuellen Machine auf meiner Synology laufen und habe diese vor zwei Tagen über das reguläre Setup Menü auf das aktuelle Release 2.1.2 Release Patch 1 aktualisiert.
Anschliessend habe ich die folgende Fehlermeldung bekommen.
OpenWB_Update.jpg
Inzwischen habe die die VM mehrmals neu gestartet. Nach einem Reboot bleiben die modalen Boxen immer noch da.
Die letzte Main.log habe ich angehängt.
Nach meiner unqualifizierten Meinung scheint das Update durchgelaufen zu sein, aber die modalen Boxen bekomme ich nicht weg um die Nutzungsbedingungen zu akzeptieren. Auch mit Tab / Enter komme ich da nicht ran.
Die crypto Fehler im Log sollten - soweit ich es gelesen habe, nicht mein Problem sein, weil ich kein OneDrive verwende.
Was kann noch testen ?
Dankbar für jeden Tip.
Christoph
Code: Alles auswählen
sudo apt-get install -y libbz2-dev
sudo apt-get install -y liblzma-dev
sudo apt-get install -y libopenblas-dev
sudo apt-get install build-essential libssl-dev libffi-dev python3-dev cargo pkg-config
sudo pip install rust -t .
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
sudo pip install cryptographyIch habe mein System auch auf einer QNAP VM laufen mit raspberry os x86. Nach vielfachem hin und her probieren und nachinstallieren sehe ich ein Fehler beim PIP Package (wird im log auch als n/a markiert). Das scheint bei @cjungde wohl auch der Ansatz gewesen zu sein. Das Paket lässt sich auch nicht in der Art upgraden mit "(sudo) pip install --upgrade pip oder rust bzw. neu installieren ohne den Befehl "--upgrade" oder mit dem get-pip.py Skript, dass bei der Installation von openwb das "neue" Paket unter dem Pfad usr/... als das richtige erkannt wird. Der Fehler bleibt bestehen. Ich sehe auch gerade nicht den Zusammenhang mit der x86 Version statt ARM, aber dafür fehlt mir auch der Einblick.ChristophR hat geschrieben: ↑Di Dez 05, 2023 2:58 pmDas klingt wie das Problem, das ich auch beim Update auf meinem QNAP NAS habe:
https://www.openwb.de/forum/viewtopic.p ... nap#p95198
Das Fehlschlagen der Cryptography ist bestimmt doch das Problem, da das System so nicht funktionsfähig sein wird.
Ein paar Notizen, was ich seinerzeit alles probiert hatte und nicht geholfen hat (Reihenfolge stimmt nicht, bzw. Befehle stammen z.T. aus verschiedenen Versuchen):Da hilft wohl nur eine neue Installation mit einem anderen OS (Ich hatte das Raspberry Desktop genommen, das geht vermutlich jetzt nicht mehr)Code: Alles auswählen
sudo apt-get install -y libbz2-dev sudo apt-get install -y liblzma-dev sudo apt-get install -y libopenblas-dev sudo apt-get install build-essential libssl-dev libffi-dev python3-dev cargo pkg-config sudo pip install rust -t . curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh sudo pip install cryptography
Habe ich aber noch nicht versucht, da ich die VM nicht mehr produktiv nutze.
VG
Christoph
Code: Alles auswählen
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'cryptography.hazmat.bindings._rust' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'cryptography.hazmat.bindings._rust' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'cryptography.hazmat.bindings._rust' to be distributed and are
already explicitly excluding 'cryptography.hazmat.bindings._rust' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
/tmp/pip-build-env-sqps7z6n/overlay/lib/python3.9/site-packages/setuptools/command/build_py.py:207: _Warning: Package 'cryptography.hazmat.bindings._rust.openssl' is absent from the `packages` configuration.
!!
********************************************************************************
############################
# Package would be ignored #
############################
Python recognizes 'cryptography.hazmat.bindings._rust.openssl' as an importable package[^1],
but it is absent from setuptools' `packages` configuration.
This leads to an ambiguous overall configuration. If you want to distribute this
package, please make sure that 'cryptography.hazmat.bindings._rust.openssl' is explicitly added
to the `packages` configuration field.
Alternatively, you can also rely on setuptools' discovery methods
(for example by using `find_namespace_packages(...)`/`find_namespace:`
instead of `find_packages(...)`/`find:`).
You can read more about "package discovery" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/package_discovery.html
If you don't want 'cryptography.hazmat.bindings._rust.openssl' to be distributed and are
already explicitly excluding 'cryptography.hazmat.bindings._rust.openssl' via
`find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`,
you can try to use `exclude_package_data`, or `include-package-data=False` in
combination with a more fine grained `package-data` configuration.
You can read more about "package data files" on setuptools documentation page:
- https://setuptools.pypa.io/en/latest/userguide/datafiles.html
[^1]: For Python, any directory (with suitable naming) can be imported,
even if it does not contain any `.py` files.
On the other hand, currently there is no concept of package data
directory, all directories are treated like packages.
********************************************************************************
!!
check.warn(importable)
copying src/cryptography/py.typed -> build/lib.linux-x86_64-cpython-39/cryptography
creating build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/__init__.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/_openssl.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/asn1.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/ocsp.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/pkcs7.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
copying src/cryptography/hazmat/bindings/_rust/x509.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust
creating build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl
copying src/cryptography/hazmat/bindings/_rust/openssl/__init__.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl
copying src/cryptography/hazmat/bindings/_rust/openssl/x25519.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl
running build_ext
running build_rust
<string>:73: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
=============================DEBUG ASSISTANCE=============================
If you are seeing a compilation error please try the following steps to
successfully install cryptography:
1) Upgrade to the latest pip and try again. This will fix errors for most
users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip
2) Read https://cryptography.io/en/latest/installation/ for specific
instructions for your platform.
3) Check our frequently asked questions for more information:
https://cryptography.io/en/latest/faq/
4) Ensure you have a recent Rust toolchain installed:
https://cryptography.io/en/latest/installation/#rust
Python: 3.9.2
platform: Linux-5.10.0-26-amd64-x86_64-with-glibc2.31
pip: n/a
setuptools: 69.0.2
setuptools_rust: 1.8.1
rustc: n/a
=============================DEBUG ASSISTANCE=============================
error: can't find Rust compiler
If you are using an outdated pip version, it is possible a prebuilt wheel is available for this package but pip is not able to install from it. Installing from the wheel would avoid the need for a Rust compiler.
To update pip, run:
pip install --upgrade pip
and then retry package installation.
If you did intend to build this package from source, try installing a Rust compiler from your system package manager and ensure it is on the PATH during installation. Alternatively, rustup (available at https://rustup.rs) is the recommended way to download and update the Rust compiler toolchain.
This package requires Rust >=1.48.0.
[end of output]
Da es mir keine Ruhe gelassen hat habe ich Neuinstallationen versucht:b3n hat geschrieben: ↑Do Dez 07, 2023 12:31 amIch habe mein System auch auf einer QNAP VM laufen mit raspberry os x86. Nach vielfachem hin und her probieren und nachinstallieren sehe ich ein Fehler beim PIP Package (wird im log auch als n/a markiert). Das scheint bei @cjungde wohl auch der Ansatz gewesen zu sein. Das Paket lässt sich auch nicht in der Art upgraden mit "(sudo) pip install --upgrade pip oder rust bzw. neu installieren ohne den Befehl "--upgrade" oder mit dem get-pip.py Skript, dass bei der Installation von openwb das "neue" Paket unter dem Pfad usr/... als das richtige erkannt wird. Der Fehler bleibt bestehen. Ich sehe auch gerade nicht den Zusammenhang mit der x86 Version statt ARM, aber dafür fehlt mir auch der Einblick.ChristophR hat geschrieben: ↑Di Dez 05, 2023 2:58 pmDas klingt wie das Problem, das ich auch beim Update auf meinem QNAP NAS habe:
https://www.openwb.de/forum/viewtopic.p ... nap#p95198
Das Fehlschlagen der Cryptography ist bestimmt doch das Problem, da das System so nicht funktionsfähig sein wird.
Ein paar Notizen, was ich seinerzeit alles probiert hatte und nicht geholfen hat (Reihenfolge stimmt nicht, bzw. Befehle stammen z.T. aus verschiedenen Versuchen):Da hilft wohl nur eine neue Installation mit einem anderen OS (Ich hatte das Raspberry Desktop genommen, das geht vermutlich jetzt nicht mehr)Code: Alles auswählen
sudo apt-get install -y libbz2-dev sudo apt-get install -y liblzma-dev sudo apt-get install -y libopenblas-dev sudo apt-get install build-essential libssl-dev libffi-dev python3-dev cargo pkg-config sudo pip install rust -t . curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh sudo pip install cryptography
Habe ich aber noch nicht versucht, da ich die VM nicht mehr produktiv nutze.
VG
Christoph
So wie ich das mit meinem Halbwissen sehe scheint die Ursache möglicherweise darin zu liegen, dass das Paket zu alt (PIP v 20 statt v23, RUST v 1.3.1 statt >1.48.0) ist und/oder an einer falschen Stelle im User openwb liegt, wo es durch ein Upgrade nicht richtig aktualisiert werden kann.
Das soll laut Cryptography Manual wohl die Hauptursache noch vor dem fehlenden/zu alten RUST Compiler sein.
https://cryptography.io/en/latest/installation/#rust
Falls das zutreffen sollte, wäre es hier möglich den PIP Pfad für die openwb in das default directory zu verweisen oder den Fehler anders zu adressieren?
Der Vollständigkeit halber: Das Debug log meldet zusätzlich, dass möglicherweise wegen eines zu alten PIP Pakets ein zur Verfügung gestelltes prebuilt wheel nicht installiert werden kann. Dies macht dann wohl auch keinen RUST Compiler notwendig.
Hier die komplette Fehlermeldung
Code: Alles auswählen
******************************************************************************** ############################ # Package would be ignored # ############################ Python recognizes 'cryptography.hazmat.bindings._rust' as an importable package[^1], but it is absent from setuptools' `packages` configuration. This leads to an ambiguous overall configuration. If you want to distribute this package, please make sure that 'cryptography.hazmat.bindings._rust' is explicitly added to the `packages` configuration field. Alternatively, you can also rely on setuptools' discovery methods (for example by using `find_namespace_packages(...)`/`find_namespace:` instead of `find_packages(...)`/`find:`). You can read more about "package discovery" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/package_discovery.html If you don't want 'cryptography.hazmat.bindings._rust' to be distributed and are already explicitly excluding 'cryptography.hazmat.bindings._rust' via `find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`, you can try to use `exclude_package_data`, or `include-package-data=False` in combination with a more fine grained `package-data` configuration. You can read more about "package data files" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/datafiles.html [^1]: For Python, any directory (with suitable naming) can be imported, even if it does not contain any `.py` files. On the other hand, currently there is no concept of package data directory, all directories are treated like packages. ******************************************************************************** !! check.warn(importable) /tmp/pip-build-env-sqps7z6n/overlay/lib/python3.9/site-packages/setuptools/command/build_py.py:207: _Warning: Package 'cryptography.hazmat.bindings._rust.openssl' is absent from the `packages` configuration. !! ******************************************************************************** ############################ # Package would be ignored # ############################ Python recognizes 'cryptography.hazmat.bindings._rust.openssl' as an importable package[^1], but it is absent from setuptools' `packages` configuration. This leads to an ambiguous overall configuration. If you want to distribute this package, please make sure that 'cryptography.hazmat.bindings._rust.openssl' is explicitly added to the `packages` configuration field. Alternatively, you can also rely on setuptools' discovery methods (for example by using `find_namespace_packages(...)`/`find_namespace:` instead of `find_packages(...)`/`find:`). You can read more about "package discovery" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/package_discovery.html If you don't want 'cryptography.hazmat.bindings._rust.openssl' to be distributed and are already explicitly excluding 'cryptography.hazmat.bindings._rust.openssl' via `find_namespace_packages(...)/find_namespace` or `find_packages(...)/find`, you can try to use `exclude_package_data`, or `include-package-data=False` in combination with a more fine grained `package-data` configuration. You can read more about "package data files" on setuptools documentation page: - https://setuptools.pypa.io/en/latest/userguide/datafiles.html [^1]: For Python, any directory (with suitable naming) can be imported, even if it does not contain any `.py` files. On the other hand, currently there is no concept of package data directory, all directories are treated like packages. ******************************************************************************** !! check.warn(importable) copying src/cryptography/py.typed -> build/lib.linux-x86_64-cpython-39/cryptography creating build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/__init__.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/_openssl.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/asn1.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/ocsp.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/pkcs7.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust copying src/cryptography/hazmat/bindings/_rust/x509.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust creating build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl copying src/cryptography/hazmat/bindings/_rust/openssl/__init__.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl copying src/cryptography/hazmat/bindings/_rust/openssl/x25519.pyi -> build/lib.linux-x86_64-cpython-39/cryptography/hazmat/bindings/_rust/openssl running build_ext running build_rust <string>:73: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html =============================DEBUG ASSISTANCE============================= If you are seeing a compilation error please try the following steps to successfully install cryptography: 1) Upgrade to the latest pip and try again. This will fix errors for most users. See: https://pip.pypa.io/en/stable/installing/#upgrading-pip 2) Read https://cryptography.io/en/latest/installation/ for specific instructions for your platform. 3) Check our frequently asked questions for more information: https://cryptography.io/en/latest/faq/ 4) Ensure you have a recent Rust toolchain installed: https://cryptography.io/en/latest/installation/#rust Python: 3.9.2 platform: Linux-5.10.0-26-amd64-x86_64-with-glibc2.31 pip: n/a setuptools: 69.0.2 setuptools_rust: 1.8.1 rustc: n/a =============================DEBUG ASSISTANCE============================= error: can't find Rust compiler If you are using an outdated pip version, it is possible a prebuilt wheel is available for this package but pip is not able to install from it. Installing from the wheel would avoid the need for a Rust compiler. To update pip, run: pip install --upgrade pip and then retry package installation. If you did intend to build this package from source, try installing a Rust compiler from your system package manager and ensure it is on the PATH during installation. Alternatively, rustup (available at https://rustup.rs) is the recommended way to download and update the Rust compiler toolchain. This package requires Rust >=1.48.0. [end of output]