seit dem Update habe ich den komischen Effekt, das sich der Lademodus selbsttätig auf Stop stellt. Ein Laden ist dadurch nicht mehr möglich.
vorherige Version 1.9.281 stable
installierte Version: 1.9.288 stable
Ladepunkt 1: openWB series 2
SOC Modul: EVCC , Fahrzeug Typ Seat, Fahrzeug dahinter ist Cupra Leon ST anderes Fahrzeug steht zum testen nicht zur Verfügung
Ladepunkt 2: go-E Charger
kein SOC Modul
EVU Modul: MQTT
PV Modul 1: MQTT
Speicher Modul nicht vorhanden
Installierte Hardware
Addon Modul, 1/3phasige Umschaltung
Ladetaster
Ich habe aus Sicherheitsgründen das Fahrzeug derzeit nicht angesteckt, das Verhalten ist aber identisch.
folgende Änderungen habe ich testweise mal versucht:
Ladetaster deaktiviert, inkl. speichern und Reboot -> keine Änderung
Lademodus nach Start der openWB: Sofortladen (vorher Stop) inkl. speichern und Reboot -> keine Änderung
Code: Alles auswählen
2022-12-06 09:39:46: PID: 5904: LP2, Lademodus Stop. Stoppe Ladung (LV0) at 10 auslademodus auslademodus.sh
2022-12-06 09:39:46: PID: 5904: LP1, Lademodus Stop. Stoppe Ladung (LV0) at 6 auslademodus auslademodus.sh
2022-12-06 09:39:42: PID: 5919: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:03: PID: 32737: LP2, Lademodus Sofort. Ladung geändert auf 6 Ampere (LV0) at 373 sofortlademodus sofortlademodus.sh
2022-12-06 09:39:02: PID: 32737: LP1, Lademodus Sofort. Ladung geändert auf 6 Ampere (LV0) at 289 sofortlademodus sofortlademodus.sh
Edit: Habe gerade gesehen das ich ja den falschen Log erwischt habe. Habe das ganze nun nochmal durchgespielt. Hier der Debug-Log:
Code: Alles auswählen
2022-12-06 12:39:43: PID: 12746: **** FATAL ********************************* (LV0) at 68 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: **** FATAL Regulation loop needs 12 seconds (LV0) at 67 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: **** FATAL ********************************* (LV0) at 66 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: LP1 Modbus 0 korrekt (LV1) at 236 evsemodbuscheck evsedintest.sh
2022-12-06 12:39:41: PID: 13954: Previous regulation loop still running. Skipping. (LV0) at 35 main /var/www/html/openWB/regel.sh
12746
2022-12-06 12:39:41: PID: 12746: auf 1 Phasen geaendert (LV1) at 122 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 13301: Pause nach Umschaltung: 2s (LV0) at 7 main runs/u1p3pcheck.sh
2022-12-06 12:39:35: PID: 12746: Stop Laden derzeit 3 Phasen, auf 1 konfiguriert, aendere... (LV1) at 116 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: Timing Umschaltung: 480 / 480 (LV1) at 17 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: automatische Umschaltung aktiv (LV1) at 16 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: Zeit zum abfragen aller Werte 3 Sekunden (LV1) at 183 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:34: PID: 12746: chargestatlp1 0 chargestatlp2 0 chargestatlp3 0 (LV1) at 1310 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: plugstatlp1 0 plugstatlp2 0 plugstatlp3 0 (LV1) at 1309 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lp1enabled 1 lp2enabled 1 lp3enabled 1 (LV1) at 1308 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: EVU 1:V/1A 2: V/1A 3: V/0A (LV1) at 1307 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla3 0 llv3 233.0 llas13 0 llas23 soclp1 0 soclp2 0 (LV1) at 1306 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla2 0 llv2 234.5 llas12 0 llas22 sofortll 16 hausverbrauch 330 wattbezug 299 uberschuss -299 (LV1) at 1305 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla1 0 llv1 234.9 llas11 0 llas21 mindestuberschuss 10 abschaltuberschuss 1400 lademodus 3 (LV1) at 1304 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: pv1watt -31 pv2watt pvwatt -31 ladeleistung 0 llalt 0 nachtladen 1 nachtladen 0 minimalA 6 maximalA 32 (LV1) at 1303 loadvars loadvars.sh
2022-12-06 12:39:32: PID: 12746: **** Regulation loop start **** (LV1) at 77 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:27: PID: 11385: **** Regulation loop needs 5 seconds (LV2) at 62 cleanup /var/www/html/openWB/regel.sh
set-currents: setze ladung auf 0A
Ladestrom < 6A, setze auf 0A
set-currents: setze ladung auf 0A
Ladestrom < 6A, setze auf 0A
2022-12-06 12:39:25: PID: 11385: Timing Umschaltung: 480 / 480 (LV1) at 17 u1p3pswitch u1p3p.sh
2022-12-06 12:39:25: PID: 11385: automatische Umschaltung aktiv (LV1) at 16 u1p3pswitch u1p3p.sh
2022-12-06 12:39:25: PID: 11385: Zeit zum abfragen aller Werte 3 Sekunden (LV1) at 183 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:24: PID: 11385: chargestatlp1 0 chargestatlp2 0 chargestatlp3 0 (LV1) at 1310 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: plugstatlp1 0 plugstatlp2 0 plugstatlp3 0 (LV1) at 1309 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lp1enabled 1 lp2enabled 1 lp3enabled 1 (LV1) at 1308 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: EVU 1:V/1A 2: V/1A 3: V/0A (LV1) at 1307 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla3 0 llv3 232.6 llas13 0 llas23 soclp1 0 soclp2 0 (LV1) at 1306 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla2 0 llv2 234.7 llas12 0 llas22 sofortll 16 hausverbrauch 330 wattbezug 299 uberschuss -299 (LV1) at 1305 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla1 0 llv1 234.7 llas11 0 llas21 mindestuberschuss 10 abschaltuberschuss 1400 lademodus 3 (LV1) at 1304 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: pv1watt -31 pv2watt pvwatt -31 ladeleistung 0 llalt 6 nachtladen 1 nachtladen 0 minimalA 6 maximalA 32 (LV1) at 1303 loadvars loadvars.sh