Nach Update auf 1.9.288 stellt sich Lademodus selbsttätig auf Stop
Verfasst: Di Dez 06, 2022 8:47 am
Hallo Zusammen,
seit dem Update habe ich den komischen Effekt, das sich der Lademodus selbsttätig auf Stop stellt. Ein Laden ist dadurch nicht mehr möglich.
vorherige Version 1.9.281 stable
installierte Version: 1.9.288 stable
Ladepunkt 1: openWB series 2
SOC Modul: EVCC , Fahrzeug Typ Seat, Fahrzeug dahinter ist Cupra Leon ST anderes Fahrzeug steht zum testen nicht zur Verfügung
Ladepunkt 2: go-E Charger
kein SOC Modul
EVU Modul: MQTT
PV Modul 1: MQTT
Speicher Modul nicht vorhanden
Installierte Hardware
Addon Modul, 1/3phasige Umschaltung
Ladetaster
Ich habe aus Sicherheitsgründen das Fahrzeug derzeit nicht angesteckt, das Verhalten ist aber identisch.
folgende Änderungen habe ich testweise mal versucht:
Ladetaster deaktiviert, inkl. speichern und Reboot -> keine Änderung
Lademodus nach Start der openWB: Sofortladen (vorher Stop) inkl. speichern und Reboot -> keine Änderung
Wenn noch Infos zur weiteren Konfiguration benötigt werden, bitte Bescheid geben.
Edit: Habe gerade gesehen das ich ja den falschen Log erwischt habe. Habe das ganze nun nochmal durchgespielt. Hier der Debug-Log:
seit dem Update habe ich den komischen Effekt, das sich der Lademodus selbsttätig auf Stop stellt. Ein Laden ist dadurch nicht mehr möglich.
vorherige Version 1.9.281 stable
installierte Version: 1.9.288 stable
Ladepunkt 1: openWB series 2
SOC Modul: EVCC , Fahrzeug Typ Seat, Fahrzeug dahinter ist Cupra Leon ST anderes Fahrzeug steht zum testen nicht zur Verfügung
Ladepunkt 2: go-E Charger
kein SOC Modul
EVU Modul: MQTT
PV Modul 1: MQTT
Speicher Modul nicht vorhanden
Installierte Hardware
Addon Modul, 1/3phasige Umschaltung
Ladetaster
Ich habe aus Sicherheitsgründen das Fahrzeug derzeit nicht angesteckt, das Verhalten ist aber identisch.
folgende Änderungen habe ich testweise mal versucht:
Ladetaster deaktiviert, inkl. speichern und Reboot -> keine Änderung
Lademodus nach Start der openWB: Sofortladen (vorher Stop) inkl. speichern und Reboot -> keine Änderung
Code: Alles auswählen
2022-12-06 09:39:46: PID: 5904: LP2, Lademodus Stop. Stoppe Ladung (LV0) at 10 auslademodus auslademodus.sh
2022-12-06 09:39:46: PID: 5904: LP1, Lademodus Stop. Stoppe Ladung (LV0) at 6 auslademodus auslademodus.sh
2022-12-06 09:39:42: PID: 5919: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:41: PID: 5919: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:31: PID: 4597: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:21: PID: 3262: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 8 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 7 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 6 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 5 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 4 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # skipping charge point 3 (not configured) (LV2) at 258 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: rfid=0; power=0; meter=0 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # processing charge point 2 (go-E Charger) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car is not charging (LV1) at 200 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: locking charge point (LV2) at 144 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: unplug detected (LV2) at 141 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: car not connected: plugstat=0 (LV1) at 130 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: rfid=0; power=0; meter=1281.123 (LV1) at 97 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: soc not configured or zero (LV2) at 87 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: # processing charge point 1 (openWB) (LV1) at 81 processChargepoint ./ladelog.sh
2022-12-06 09:39:11: PID: 1871: ### start (->/var/www/html/openWB/web/logging/data/ladelog/202212.csv) (LV1) at 10 main ./ladelog.sh
2022-12-06 09:39:03: PID: 32737: LP2, Lademodus Sofort. Ladung geändert auf 6 Ampere (LV0) at 373 sofortlademodus sofortlademodus.sh
2022-12-06 09:39:02: PID: 32737: LP1, Lademodus Sofort. Ladung geändert auf 6 Ampere (LV0) at 289 sofortlademodus sofortlademodus.sh
Edit: Habe gerade gesehen das ich ja den falschen Log erwischt habe. Habe das ganze nun nochmal durchgespielt. Hier der Debug-Log:
Code: Alles auswählen
2022-12-06 12:39:43: PID: 12746: **** FATAL ********************************* (LV0) at 68 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: **** FATAL Regulation loop needs 12 seconds (LV0) at 67 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: **** FATAL ********************************* (LV0) at 66 cleanup /var/www/html/openWB/regel.sh
2022-12-06 12:39:43: PID: 12746: LP1 Modbus 0 korrekt (LV1) at 236 evsemodbuscheck evsedintest.sh
2022-12-06 12:39:41: PID: 13954: Previous regulation loop still running. Skipping. (LV0) at 35 main /var/www/html/openWB/regel.sh
12746
2022-12-06 12:39:41: PID: 12746: auf 1 Phasen geaendert (LV1) at 122 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 13301: Pause nach Umschaltung: 2s (LV0) at 7 main runs/u1p3pcheck.sh
2022-12-06 12:39:35: PID: 12746: Stop Laden derzeit 3 Phasen, auf 1 konfiguriert, aendere... (LV1) at 116 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: Timing Umschaltung: 480 / 480 (LV1) at 17 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: automatische Umschaltung aktiv (LV1) at 16 u1p3pswitch u1p3p.sh
2022-12-06 12:39:35: PID: 12746: Zeit zum abfragen aller Werte 3 Sekunden (LV1) at 183 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:34: PID: 12746: chargestatlp1 0 chargestatlp2 0 chargestatlp3 0 (LV1) at 1310 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: plugstatlp1 0 plugstatlp2 0 plugstatlp3 0 (LV1) at 1309 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lp1enabled 1 lp2enabled 1 lp3enabled 1 (LV1) at 1308 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: EVU 1:V/1A 2: V/1A 3: V/0A (LV1) at 1307 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla3 0 llv3 233.0 llas13 0 llas23 soclp1 0 soclp2 0 (LV1) at 1306 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla2 0 llv2 234.5 llas12 0 llas22 sofortll 16 hausverbrauch 330 wattbezug 299 uberschuss -299 (LV1) at 1305 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: lla1 0 llv1 234.9 llas11 0 llas21 mindestuberschuss 10 abschaltuberschuss 1400 lademodus 3 (LV1) at 1304 loadvars loadvars.sh
2022-12-06 12:39:34: PID: 12746: pv1watt -31 pv2watt pvwatt -31 ladeleistung 0 llalt 0 nachtladen 1 nachtladen 0 minimalA 6 maximalA 32 (LV1) at 1303 loadvars loadvars.sh
2022-12-06 12:39:32: PID: 12746: **** Regulation loop start **** (LV1) at 77 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:27: PID: 11385: **** Regulation loop needs 5 seconds (LV2) at 62 cleanup /var/www/html/openWB/regel.sh
set-currents: setze ladung auf 0A
Ladestrom < 6A, setze auf 0A
set-currents: setze ladung auf 0A
Ladestrom < 6A, setze auf 0A
2022-12-06 12:39:25: PID: 11385: Timing Umschaltung: 480 / 480 (LV1) at 17 u1p3pswitch u1p3p.sh
2022-12-06 12:39:25: PID: 11385: automatische Umschaltung aktiv (LV1) at 16 u1p3pswitch u1p3p.sh
2022-12-06 12:39:25: PID: 11385: Zeit zum abfragen aller Werte 3 Sekunden (LV1) at 183 main /var/www/html/openWB/regel.sh
2022-12-06 12:39:24: PID: 11385: chargestatlp1 0 chargestatlp2 0 chargestatlp3 0 (LV1) at 1310 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: plugstatlp1 0 plugstatlp2 0 plugstatlp3 0 (LV1) at 1309 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lp1enabled 1 lp2enabled 1 lp3enabled 1 (LV1) at 1308 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: EVU 1:V/1A 2: V/1A 3: V/0A (LV1) at 1307 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla3 0 llv3 232.6 llas13 0 llas23 soclp1 0 soclp2 0 (LV1) at 1306 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla2 0 llv2 234.7 llas12 0 llas22 sofortll 16 hausverbrauch 330 wattbezug 299 uberschuss -299 (LV1) at 1305 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: lla1 0 llv1 234.7 llas11 0 llas21 mindestuberschuss 10 abschaltuberschuss 1400 lademodus 3 (LV1) at 1304 loadvars loadvars.sh
2022-12-06 12:39:24: PID: 11385: pv1watt -31 pv2watt pvwatt -31 ladeleistung 0 llalt 6 nachtladen 1 nachtladen 0 minimalA 6 maximalA 32 (LV1) at 1303 loadvars loadvars.sh