Seite 1 von 1

Sma Tripower Wert negativ

Verfasst: Mi Aug 09, 2023 1:01 pm
von mathschut
Hi, habe seit gestern auch Version 2 am laufen. Jetzt wird aber mein SMA Tripower Wechselrichter die Leistung mit Minus angezeigt. Hat jemand eine Idee, was das Problem sein kann?

Re: Sma Tripower Wert negativ

Verfasst: Mi Aug 09, 2023 2:27 pm
von LenaK
Die Leistung auf der Statusseite wird bei Produktion negativ angegeben. Produktion/Export negativ, Import positiv.

Sollte also korrekt sein.

Re: Sma Tripower Wert negativ

Verfasst: Mi Aug 09, 2023 2:44 pm
von mathschut
Aber schau mal den Status an bei mir. 8KW werden eingespeist, aber PV Leistung werden nur die 4KW vom anderen wechselrichter angezeigt?

Re: Sma Tripower Wert negativ

Verfasst: Do Aug 10, 2023 6:36 am
von LenaK
Bitte das Debuglevel auf Details stellen und mindestens einen kompletten Durchlauf von # ***Start*** bis # ***Start*** aus dem Main-Log unter System->Fehlersuche posten, wenn das Problem auftritt. Sensible Daten wie Benutzernamen und Kennwörter unkenntlich machen.

Re: Sma Tripower Wert negativ

Verfasst: Do Aug 10, 2023 7:41 am
von mathschut

Code: Alles auswählen

2023-08-10 09:36:40,050 - {root:65} - {INFO:MainThread} - # ***Start*** 
2023-08-10 09:36:40,118 - {modules.devices.sma_sunny_boy.device:72} - {DEBUG:device1} - Start device reading {'component2': <modules.devices.sma_sunny_boy.inverter.SmaSunnyBoyInverter object at 0x711d1958>}
2023-08-10 09:36:40,119 - {modules.common.component_context:51} - {DEBUG:device2} - Update Komponenten ['MQTT-Speicher', 'MQTT-Wechselrichter']
2023-08-10 09:36:40,121 - {modules.common.component_context:51} - {DEBUG:device3} - Update Komponenten []
2023-08-10 09:36:40,121 - {modules.devices.mqtt.device:47} - {DEBUG:device2} - MQTT-Module müssen nicht ausgelesen werden.
2023-08-10 09:36:40,124 - {modules.common.component_context:51} - {DEBUG:device0} - Update Komponenten ['SMA Home Manager Zähler']
2023-08-10 09:36:40,127 - {modules.common.component_context:24} - {DEBUG:cp6} - Update Komponente ['Ladepunkt']
2023-08-10 09:36:40,142 - {modules.common.component_context:24} - {DEBUG:device1} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2023-08-10 09:36:40,218 - {modules.common.component_context:24} - {DEBUG:device0} - Update Komponente ['SMA Home Manager Zähler']
2023-08-10 09:36:40,219 - {modules.common.store._api:26} - {DEBUG:device0} - Raw data CounterState(voltages=[233.001, 233.399, 233.86], powers=[-3942.8, -2269.5, -2094.0], currents=[-17.29, -9.915, -9.145], power_factors=[0.984, 0.984, 0.981], imported=9800789.0, exported=50477231.2, power=-8306.3, frequency=50.0)
2023-08-10 09:36:40,221 - {modules.devices.sma_shm.device:29} - {DEBUG:device0} - All components updated
2023-08-10 09:36:40,900 - {modules.devices.sma_sunny_boy.inverter:72} - {DEBUG:device1} - WR 192.168.1.118: InverterState(currents=[0.0, 0.0, 0.0], power=-6860, exported=62807812, dc_power=-6966)
2023-08-10 09:36:40,901 - {modules.common.store._api:26} - {DEBUG:device1} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-6860, exported=62807812, dc_power=-6966)
2023-08-10 09:36:40,910 - {modules.common.component_context:24} - {DEBUG:component2} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2023-08-10 09:36:40,914 - {modules.common.component_context:24} - {DEBUG:component4} - Update Komponente ['MQTT-Speicher']
2023-08-10 09:36:40,916 - {modules.common.store._api:26} - {DEBUG:component2} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-6860, exported=62807812, dc_power=None)
2023-08-10 09:36:40,917 - {modules.common.component_context:24} - {DEBUG:component5} - Update Komponente ['MQTT-Wechselrichter']
2023-08-10 09:36:40,922 - {modules.common.component_context:24} - {DEBUG:cp6} - Update Komponente ['Ladepunkt']
2023-08-10 09:36:40,925 - {modules.common.store._api:30} - {INFO:component2} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-6860, exported=62807812, dc_power=None)
2023-08-10 09:36:40,930 - {modules.common.component_context:24} - {DEBUG:component7} - Update Komponente ['SMA Home Manager Zähler']
2023-08-10 09:36:40,941 - {modules.common.store._api:30} - {INFO:component7} - Saving CounterState(voltages=[233.001, 233.399, 233.86], powers=[-3942.8, -2269.5, -2094.0], currents=[-17.29, -9.915, -9.145], power_factors=[0.984, 0.984, 0.981], imported=9800789.0, exported=50477231.2, power=-8306.3, frequency=50.0)
2023-08-10 09:36:41,033 - {modules.common.component_context:24} - {DEBUG:component7} - Update Komponente ['SMA Home Manager Zähler']
2023-08-10 09:36:41,034 - {modules.common.store._api:30} - {INFO:component7} - Saving CounterState(voltages=[233.001, 233.399, 233.86], powers=[-3942.8, -2269.5, -2094.0], currents=[-17.29, -9.915, -9.145], power_factors=[0.984, 0.984, 0.981], imported=9800789.0, exported=50477231.2, power=-8306.3, frequency=50.0)
2023-08-10 09:36:41,262 - {control.bat_all:200} - {DEBUG:MainThread} - Verbleibende Speicher-Leistung: 0W
2023-08-10 09:36:41,263 - {control.bat_all:207} - {DEBUG:MainThread} - Keine reservierte Ladeleistung für den Speicher vorhalten, da dieser bereits voll geladen ist.
2023-08-10 09:36:41,264 - {control.bat_all:164} - {INFO:MainThread} - 0W verbleibende Speicher-Leistung
2023-08-10 09:36:41,269 - {control.counter:138} - {INFO:MainThread} - Verbleibende Ströme an Zähler 7: [33.29, 25.91, 25.14]A
2023-08-10 09:36:41,269 - {control.counter:161} - {INFO:MainThread} - Verbleibende Leistung an Zähler 7: 19306.3W
2023-08-10 09:36:41,273 - {control.counter:138} - {INFO:MainThread} - Verbleibende Ströme an Zähler 7: [33.29, 25.91, 25.14]A
2023-08-10 09:36:41,277 - {control.counter:161} - {INFO:MainThread} - Verbleibende Leistung an Zähler 7: 19306.3W
2023-08-10 09:36:41,285 - {control.chargepoint.chargepoint:271} - {INFO:MainThread} - LP 6: Keine Ladung, da kein Auto angesteckt ist.
2023-08-10 09:36:41,289 - {control.data:337} - {INFO:MainThread} - bat4
BatData(get=Get(soc=100, daily_exported=0, daily_imported=0, imported=4700, exported=2800, fault_state=0, fault_str='Kein Fehler.', power=0))
2023-08-10 09:36:41,291 - {control.data:307} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=100, daily_exported=0, daily_imported=0, imported=4700, exported=2800, power=0), set=Set(charging_power_left=0, switch_on_soc_reached=True))
2023-08-10 09:36:41,296 - {control.data:308} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=0.0, daily_exported=0, power=0, imported=5125541.02, exported=0))
2023-08-10 09:36:41,297 - {control.data:337} - {INFO:MainThread} - cp6
ChargepointData(get=Get(charge_state=False, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=0), currents=[0.0, 0.0, 0.0], daily_imported=0.0, daily_exported=0, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5125541.02, phases_in_use=2, plug_state=False, power=0, rfid_timestamp=None, rfid=None, state_str='Keine Ladung, da kein Auto angesteckt ist.', voltages=[234.59, 233.28, 232.48]), set=Set(change_ev_permitted=[False, 'Das Fahrzeug darf nur geändert werden, wenn noch nicht geladen wurde.                             Bitte abstecken, dann wird das gewählte Fahrzeug verwendet.'], charging_ev=-1, charging_ev_prev=-1, current=0, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='_', imported_at_mode_switch=0, imported_at_plugtime=0, imported_since_mode_switch=0, imported_since_plugged=0, range_charged=0, time_charged='00:00', timestamp_start_charging=None), manual_lock=False, phases_to_use=2, plug_state_prev=False, plug_time=None, required_power=0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x707b8b80>), config=Config(configuration={'mode': 'series', 'ip_address': 'localhost', 'duo_num': 0}, ev=0, name='Interne openWB', type='internal_openwb', template=1, connected_phases=3, phase_1=1, auto_phase_switch_hw=True, control_pilot_interruption_hw=True, id=6))
2023-08-10 09:36:41,301 - {control.data:337} - {INFO:MainThread} - cpt0
CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=0, max_current_multi_phases=32, max_current_single_phase=32, name='Standard Ladepunkt-Profil', rfid_enabling=False, valid_tags=[])
2023-08-10 09:36:41,302 - {control.data:337} - {INFO:MainThread} - cpt1
CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), id=1, max_current_multi_phases=16, max_current_single_phase=16, name='Skoda', rfid_enabling=False, valid_tags=[])
2023-08-10 09:36:41,308 - {control.data:337} - {INFO:MainThread} - counter7
CounterData(config=Config(max_currents=[16, 16, 16], max_total_power=11000), get=Get(powers=[-3942.8, -2269.5, -2094.0], currents=[-17.29, -9.91, -9.14], voltages=[233.0, 233.4, 233.86], power_factors=[0.98, 0.98, 0.98], unbalanced_load=0, frequency=50.0, daily_exported=8201.1, daily_imported=397.6, imported=9800789.0, exported=50477231.2, fault_state=0, fault_str='Kein Fehler.', power=-8306.3), set=Set(error_counter=0, reserved_surplus=0, released_surplus=0, raw_power_left=19306.3, raw_currents_left=[33.29, 25.91, 25.14], surplus_power_left=0, state_str=''))
2023-08-10 09:36:41,310 - {control.data:312} - {INFO:MainThread} - counter_all_data
CounterAllData(config=Config(reserve_for_not_charging=True), get=Get(hierarchy=[{'id': 7, 'type': 'counter', 'children': [{'id': 2, 'type': 'inverter', 'children': []}, {'id': 4, 'type': 'bat', 'children': []}, {'id': 5, 'type': 'inverter', 'children': []}, {'id': 6, 'type': 'cp', 'children': []}, {'id': 7, 'type': 'counter', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=4868.700000000001, invalid_home_consumption=0, daily_yield_home_consumption=13796.0, disengageable_smarthome_power=0))
2023-08-10 09:36:41,312 - {control.data:337} - {INFO:MainThread} - ct0
ChargeTemplateData(name='Standard-Lade-Profil', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=100), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=6, limit=Limit(selected='none', amount=1000, soc=50))))
2023-08-10 09:36:41,313 - {control.data:337} - {INFO:MainThread} - ct1
ChargeTemplateData(name='Skoda Enyaq', disable_after_unplug=False, prio=False, load_default=False, time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(min_soc_current=10, min_current=0, feed_in_limit=False, min_soc=0, max_soc=100), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=6, limit=Limit(selected='none', amount=1000, soc=50))))
2023-08-10 09:36:41,316 - {control.data:337} - {INFO:MainThread} - ev0
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=15000, min_current=6, max_current_single_phase=32, battery_capacity=58000, nominal_difference=2, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), control_parameter=ControlParameter(required_current=6, required_currents=[0.0, 0.0, 0.0], phases=0, prio=False, timestamp_switch_on_off='08/09/2023, 09:10:21', timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='pv_charging', chargemode='pv_charging', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None, state=6), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp='', force_soc_update=True, range=0, fault_state=0, fault_str=''))
2023-08-10 09:36:41,317 - {control.data:337} - {INFO:MainThread} - ev6
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=32, battery_capacity=82000, nominal_difference=1, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), control_parameter=ControlParameter(required_current=0, required_currents=[0.0, 0.0, 0.0], phases=0, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode=<Chargemode.STOP: 'stop'>, chargemode=<Chargemode.STOP: 'stop'>, used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None, state=0), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp='', force_soc_update=False, range=0, fault_state=0, fault_str='Kein Fehler.'))
2023-08-10 09:36:41,317 - {control.data:337} - {INFO:MainThread} - ev2
EvData(set=Set(ev_template=EvTemplate(data=EvTemplateData(name='Skoda Enyaq', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=16, battery_capacity=58000, nominal_difference=2, keep_charge_active_duration=40), et_num=0), soc_error_counter=0), control_parameter=ControlParameter(required_current=0, required_currents=[0.0, 0.0, 0.0], phases=3, prio=False, timestamp_switch_on_off=None, timestamp_auto_phase_switch=None, timestamp_perform_phase_switch=None, submode='stop', chargemode='stop', used_amount_instant_charging=0, imported_at_plan_start=0, current_plan=None, state=0), charge_template=1, ev_template=1, name='Skoda Enyaq', tag_id=[], get=Get(soc=80, soc_timestamp='08/10/2023, 09:36:02', force_soc_update=False, range=276, fault_state=0, fault_str='Kein Fehler.'))
2023-08-10 09:36:41,319 - {control.data:337} - {INFO:MainThread} - et0
EvTemplateData(name='Standard-Fahrzeug-Profil', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=15000, min_current=6, max_current_single_phase=32, battery_capacity=58000, nominal_difference=2, keep_charge_active_duration=40)
2023-08-10 09:36:41,320 - {control.data:337} - {INFO:MainThread} - et1
EvTemplateData(name='Skoda Enyaq', max_current_multi_phases=16, max_phases=3, phase_switch_pause=2, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=False, control_pilot_interruption_duration=4, average_consump=17000, min_current=6, max_current_single_phase=16, battery_capacity=58000, nominal_difference=2, keep_charge_active_duration=40)
2023-08-10 09:36:41,321 - {control.data:316} - {INFO:MainThread} - general_data
GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=3), pv_charging=PvCharging(bat_prio=False, charging_power_reserve=200, control_range=[-230, 0], feed_in_yield=15000, phase_switch_delay=2, phases_to_use=0, rundown_power=1000, rundown_soc=50, switch_off_delay=60, switch_off_soc=40, switch_off_threshold=50, switch_on_delay=30, switch_on_soc=60, switch_on_threshold=1500), scheduled_charging=ScheduledCharging(phases_to_use=0), time_charging=TimeCharging(phases_to_use=1), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='local', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp='', mqtt_bridge=False, price_kwh=0.35, range_unit='km', ripple_control_receiver=RippleControlReceiver(configured=False, r1_active=False, r2_active=False))
2023-08-10 09:36:41,322 - {control.data:317} - {INFO:MainThread} - general_data-display
local
2023-08-10 09:36:41,323 - {control.data:318} - {INFO:MainThread} - graph_data
GraphData(config=Config(duration=120))
2023-08-10 09:36:41,324 - {control.data:319} - {INFO:MainThread} - optional_data
OptionalData(et=Et(active=False, config=EtConfig(max_price=0, provider={}), get=EtGet(price=0, price_list=[])), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=120, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x707b86e8>), led=Led(active=False), rfid=Rfid(active=False))
2023-08-10 09:36:41,325 - {control.data:337} - {INFO:MainThread} - pv2
PvData(config=Config(max_ac_out=8600000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=11896, monthly_exported=0, yearly_exported=0, exported=62807812, fault_state=0, fault_str='Kein Fehler.', power=-6860))
2023-08-10 09:36:41,326 - {control.data:337} - {INFO:MainThread} - pv5
PvData(config=Config(max_ac_out=5000), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=2500.0, monthly_exported=0, yearly_exported=0, exported=2687800, fault_state=0, fault_str='Kein Fehler.', power=1991.3))
2023-08-10 09:36:41,326 - {control.data:321} - {INFO:MainThread} - pv_all_data
PvAllData(config=Config(configured=True), get=Get(daily_exported=14396.0, monthly_exported=0, yearly_exported=0, exported=65495612, power=-4868.7))
2023-08-10 09:36:41,328 - {control.data:337} - {INFO:MainThread} - system
{'update_in_progress': False, 'perform_update': False, 'ip_address': '192.168.1.219', 'current_commit': '2023-08-03 12:57:11 +0200 [6746ba8e0]', 'current_branch': 'Release', 'current_branch_commit': '2023-08-03 12:57:11 +0200 [6746ba8e0]', 'current_missing_commits': [], 'datastore_version': 17, 'dataprotection_acknowledged': True, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.0', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1691652991, 'time': '09:36:31', 'grid': -8.307, 'house-power': 4.856, 'charging-all': 0.0, 'pv-all': 4.856, 'cp6-power': 0.0, 'ev2-soc': 80, 'bat-all-power': 0.0, 'bat-all-soc': 100}, 'module_update_completed': True}
2023-08-10 09:36:41,330 - {control.data:350} - {INFO:MainThread} - device1
{'name': 'SMA Sunny Boy', 'type': 'sma_sunny_boy', 'id': 1, 'configuration': {'ip_address': '192.168.1.118'}}
2023-08-10 09:36:41,331 - {control.data:352} - {INFO:MainThread} - component2
{'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'type': 'inverter', 'id': 2, 'configuration': {'hybrid': False, 'version': 0}}
2023-08-10 09:36:41,332 - {control.data:350} - {INFO:MainThread} - device2
{'name': 'MQTT', 'type': 'mqtt', 'id': 2, 'configuration': {}}
2023-08-10 09:36:41,335 - {control.data:352} - {INFO:MainThread} - component4
{'name': 'MQTT-Speicher', 'type': 'bat', 'id': 4, 'configuration': {}}
2023-08-10 09:36:41,336 - {control.data:352} - {INFO:MainThread} - component5
{'name': 'MQTT-Wechselrichter', 'type': 'inverter', 'id': 5, 'configuration': {}}
2023-08-10 09:36:41,337 - {control.data:350} - {INFO:MainThread} - device3
{'name': 'SMA Home Manager', 'type': 'sma_shm', 'id': 3, 'configuration': {}}
2023-08-10 09:36:41,337 - {control.data:350} - {INFO:MainThread} - device0
{'name': 'SMA Home Manager', 'type': 'sma_shm', 'id': 0, 'configuration': {}}
2023-08-10 09:36:41,337 - {control.data:352} - {INFO:MainThread} - component7
{'name': 'SMA Home Manager Zähler', 'type': 'counter', 'id': 7, 'configuration': {'serials': None}}
2023-08-10 09:36:41,338 - {control.data:324} - {INFO:MainThread} - 

2023-08-10 09:36:41,338 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus
2023-08-10 09:36:41,339 - {control.algorithm.algorithm:31} - {INFO:MainThread} - **Mindestrom setzen**
2023-08-10 09:36:41,346 - {control.algorithm.algorithm:33} - {INFO:MainThread} - **Sollstrom setzen**
2023-08-10 09:36:41,351 - {control.counter:211} - {INFO:MainThread} - Überschuss zur PV-geführten Ladung: 8191.299999999999W
2023-08-10 09:36:41,353 - {control.counter:470} - {DEBUG:MainThread} - Zähler 7: Begrenzung der verbleibenden Leistung auf 8191.299999999999W
2023-08-10 09:36:41,355 - {control.algorithm.algorithm:39} - {INFO:MainThread} - **PV-geführten Strom setzen**
2023-08-10 09:36:41,360 - {control.process:23} - {INFO:MainThread} - # Ladung starten.
2023-08-10 09:36:41,377 - {modules.common.component_context:24} - {DEBUG:cp6} - Update Komponente ['Ladepunkt']
2023-08-10 09:36:41,407 - {control.counter:186} - {INFO:MainThread} - 0W reservierte EVU-Leistung, 0W freigegebene EVU-Leistung
2023-08-10 09:36:41,674 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=update, args=(), kwargs={})
2023-08-10 09:36:41,755 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2023-08-10 09:36:45,778 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2023-08-10 09:36:50,792 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={})
2023-08-10 09:36:50,794 - {root:65} - {INFO:MainThread} - # ***Start*** 

Re: Sma Tripower Wert negativ

Verfasst: Do Aug 10, 2023 1:42 pm
von LenaK
Hilfetext vom MQTT-WR gelesen?
openWB/set/pv/1/get/power
PV-Leistung in Watt als Zahl mit oder ohne Nachkommastellen (Float, Integer) und einem Punkt als Dezimaltrennzeichen. Produzierte Leistung muss ein negatives Vorzeichen haben. (In bestimmten Konstellationen, z.B. wenn ein Hybridsystem über einen zweiten Wechselrichter geladen wird, hat die Leistung ein positives Vorzeichen.) Beispiel: -123
openWB/set/pv/1/get/exported
Erzeugte Energie in Wh, Zahl mit oder ohne Nachkommastellen (Float, Integer) und einem Punkt als Dezimaltrennzeichen, nur positiv
Beispiel: 123.45
Dein Wert ist positiv, der muss negativ sein.

Re: Sma Tripower Wert negativ

Verfasst: Do Aug 10, 2023 8:40 pm
von mathschut
Okay, also muss ich den Wert vom zweiten Wechselrichter per Mqtt mit Minus Zeichen an die openwb senden. Warum muss der Wert aber nagativ sein, dass verstehe ich nicht. Somit ist der Wert vom SMA Tripower aber richtig?

Re: Sma Tripower Wert negativ

Verfasst: Fr Aug 11, 2023 4:58 am
von LenaK
Der SMA liefert einen negativen Wert.

Produzierte/Exportierte Leistung ist negativ, importierte Leistung positiv. Das gilt für alle Leistungen in der openWB.

Re: Sma Tripower Wert negativ

Verfasst: Fr Aug 11, 2023 7:11 am
von mathschut
War das in der 1.9 Version auch schon so?

Re: Sma Tripower Wert negativ

Verfasst: Fr Aug 11, 2023 8:26 am
von mathschut
So, jetzt ist der Mqtt Wert negativ. Der PV und Einspeisewert stimmen jetzt auch, aber beim Hausverbrauch scheint was nicht zu stimmen, laut Anzeige.