SENEC Modul

[matzeeg3]

Hey cjungde, einfach 1A läuft auf anhieb. Ich bin begeistert vielen vielen dank!

Hallo Matze und coyotenfuchs,

ich habe die PV Erzeugung jetzt mal mit aufgenommen. Bitte einfach im ersten Post die Änderungen übernehmen.

Gruß
Christoph

Update 16.05.2021:
Auf zweifachen Wunsch habe ich nun auch die Daten des Wechselrichters aus der SENEC Batterie geladen.
Dafür bitte den Code der senec.py mit dem oben austauschen und die Konfiguration des PV Moduls auf HTTP einstellen.
fall jemand - wie ich selbst - von einem direkten PV Modul zu den ausgelesenen Daten aus der SENEC wechselt: der zweite Wert 'pvewh' wir auf jeden Fall unterschiedlich sein, da sie SENEC die Gesamt-PV Erzeugung selbst errechnet und nicht aus dem Wechselrichter lädt.

[cjungde]

Danke fürs Feedback

[mifrosch]

Super Anleitung. Funktioniert auf Anhieb. Dickes Danke an jungde.
Werden diese Änderungen auch mit der neuen Version 2.0 funktionieren?
VG Michael

[cjungde]

Ich habe ein sehr großes Interesse mein eigenes System auch mit der 2.0 zu nutzen und werde das natürlich wieder veröffentlichen. Nach einer ersten Rückfrage scheint es nutzbar zu sein. Mal sehen, wie es aussieht, wenn die 2.0 verfügbar wird.

[mifrosch]

Hört sich gut an. Wenn es soweit ist, bei Bedarf melden. Ich kann beim Testen helfen.

8,2 kWp Q-Cells
Solaredge SE8K
Senec V2.1 5 kWh
openWB series2 standard+

[cjungde]

Hallo SENEC Mitleser:

Kleines Update falls die Daten bei Euch nicht mehr ausgelesen werden:

Durch eine Änderungen im Weg wie die HTTP Module die Werte aus meinem Modul abrufen, ist es nun notwendig, dass das korrekte Protokoll in der OpenWB Konfiguration angegeben werden muss. Daher muss vor alle localhost/... ein 'http://' gesetzt werden. Ich habe die Anleitung oben entsprechend geändert. (Genaueres zum Grund: viewtopic.php?f=9&t=4092)

[coyotenfuchs]

Ich habe heute Nachmittag versucht auf die aktuelle Nightly 1.9.250 upzudaten...leider sind bei der installierten Nightly keine EVU Daten mehr verarbeitet worden. Die "127.0.0.1" habe ich in den Konfigurationen anstatt "localhost" eingetragen.

Hat jemand auch dieses Phänomen? Ich habe jetzt erstmal die Beta 1.9.245 wieder am laufen, die auch EVU Daten liefert.

[cjungde]

Hallo coyotenfuchs,

hast Du die volle URL mit http als Protokoll eingetragen ?
z.B. "http://127.0.0.1/openWB/ramdisk/wattbezug_senec"

Ich habe meine Installation gerade nochmal auf die aktuellste Nightly umgestellt und bekomme bis auf die Stromstärke alles angezeigt.

Wie sieht die Statusseite bei Dir aus ?

[coyotenfuchs]

Hallo cjungde,

die URL mit http als Protokoll habe ich eingetragen wie in deinem ersten Post in diesem Thread.

Habe soeben nochmals die aktuellste Nightly aufgespielt:
sporadisch kommen die EVU Werte wie bei dir

nach ca 10 Sekunden werden keine Spannungs- und Leistungswerte mehr angezeigt

Edit:

Code: Alles auswählen

2022-01-10 20:58:11: **** FATAL ********************************* (LV0)
2022-01-10 20:58:11: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:58:11: **** FATAL ********************************* (LV0)
2022-01-10 20:58:03: **** FATAL ********************************* (LV0)
2022-01-10 20:58:03: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:58:03: **** FATAL ********************************* (LV0)
2022-01-10 20:57:52: **** FATAL ********************************* (LV0)
2022-01-10 20:57:52: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:57:52: **** FATAL ********************************* (LV0)
2022-01-10 20:57:42: **** FATAL ********************************* (LV0)
2022-01-10 20:57:42: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:57:42: **** FATAL ********************************* (LV0)
2022-01-10 20:57:32: **** FATAL ********************************* (LV0)
2022-01-10 20:57:32: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:57:32: **** FATAL ********************************* (LV0)
2022-01-10 20:57:25: **** FATAL ********************************* (LV0)
2022-01-10 20:57:25: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:57:25: **** FATAL ********************************* (LV0)
2022-01-10 20:57:12: **** FATAL ********************************* (LV0)
2022-01-10 20:57:12: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:57:12: **** FATAL ********************************* (LV0)
2022-01-10 20:57:02: **** FATAL ********************************* (LV0)
2022-01-10 20:57:02: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:57:02: **** FATAL ********************************* (LV0)
2022-01-10 20:56:51: **** FATAL ********************************* (LV0)
2022-01-10 20:56:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:56:51: **** FATAL ********************************* (LV0)
2022-01-10 20:56:42: **** FATAL ********************************* (LV0)
2022-01-10 20:56:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:56:42: **** FATAL ********************************* (LV0)
2022-01-10 20:56:31: **** FATAL ********************************* (LV0)
2022-01-10 20:56:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:56:31: **** FATAL ********************************* (LV0)
2022-01-10 20:56:22: **** FATAL ********************************* (LV0)
2022-01-10 20:56:22: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:56:22: **** FATAL ********************************* (LV0)
2022-01-10 20:56:12: **** FATAL ********************************* (LV0)
2022-01-10 20:56:12: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:56:12: **** FATAL ********************************* (LV0)
2022-01-10 20:56:02: **** FATAL ********************************* (LV0)
2022-01-10 20:56:02: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:56:02: **** FATAL ********************************* (LV0)
2022-01-10 20:55:53: **** FATAL ********************************* (LV0)
2022-01-10 20:55:53: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:55:53: **** FATAL ********************************* (LV0)
2022-01-10 20:55:42: **** FATAL ********************************* (LV0)
2022-01-10 20:55:42: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:55:42: **** FATAL ********************************* (LV0)
2022-01-10 20:55:33: **** FATAL ********************************* (LV0)
2022-01-10 20:55:33: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:55:33: **** FATAL ********************************* (LV0)
2022-01-10 20:55:23: **** FATAL ********************************* (LV0)
2022-01-10 20:55:23: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:55:23: **** FATAL ********************************* (LV0)
2022-01-10 20:55:13: **** FATAL ********************************* (LV0)
2022-01-10 20:55:13: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:55:13: **** FATAL ********************************* (LV0)
2022-01-10 20:55:04: ##### cron5min.sh finished ##### (LV0)
2022-01-10 20:55:02: **** FATAL ********************************* (LV0)
2022-01-10 20:55:02: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:55:02: **** FATAL ********************************* (LV0)
2022-01-10 20:55:02: ##### cron5min.sh started ##### (LV0)
2022-01-10 20:54:52: **** FATAL ********************************* (LV0)
2022-01-10 20:54:52: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:54:52: **** FATAL ********************************* (LV0)
2022-01-10 20:54:42: **** FATAL ********************************* (LV0)
2022-01-10 20:54:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:54:42: **** FATAL ********************************* (LV0)
2022-01-10 20:54:31: **** FATAL ********************************* (LV0)
2022-01-10 20:54:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:54:31: **** FATAL ********************************* (LV0)
2022-01-10 20:54:21: **** FATAL ********************************* (LV0)
2022-01-10 20:54:21: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:54:21: **** FATAL ********************************* (LV0)
2022-01-10 20:54:11: **** FATAL ********************************* (LV0)
2022-01-10 20:54:11: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:54:11: **** FATAL ********************************* (LV0)
2022-01-10 20:54:01: **** FATAL ********************************* (LV0)
2022-01-10 20:54:01: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:54:01: **** FATAL ********************************* (LV0)
2022-01-10 20:53:51: **** FATAL ********************************* (LV0)
2022-01-10 20:53:51: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:53:51: **** FATAL ********************************* (LV0)
2022-01-10 20:53:41: **** FATAL ********************************* (LV0)
2022-01-10 20:53:41: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:53:41: **** FATAL ********************************* (LV0)
2022-01-10 20:53:31: **** FATAL ********************************* (LV0)
2022-01-10 20:53:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:53:31: **** FATAL ********************************* (LV0)
2022-01-10 20:53:22: **** FATAL ********************************* (LV0)
2022-01-10 20:53:22: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:53:22: **** FATAL ********************************* (LV0)
2022-01-10 20:53:12: **** FATAL ********************************* (LV0)
2022-01-10 20:53:12: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:53:12: **** FATAL ********************************* (LV0)
2022-01-10 20:53:01: **** FATAL ********************************* (LV0)
2022-01-10 20:53:01: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:53:01: **** FATAL ********************************* (LV0)
2022-01-10 20:52:51: **** FATAL ********************************* (LV0)
2022-01-10 20:52:51: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:52:51: **** FATAL ********************************* (LV0)
2022-01-10 20:52:42: **** FATAL ********************************* (LV0)
2022-01-10 20:52:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:52:42: **** FATAL ********************************* (LV0)
2022-01-10 20:52:31: **** FATAL ********************************* (LV0)
2022-01-10 20:52:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:52:31: **** FATAL ********************************* (LV0)
kill: (2507): Kein passender Prozess gefunden
2022-01-10 20:52:21: **** FATAL ********************************* (LV0)
2022-01-10 20:52:21: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:52:21: **** FATAL ********************************* (LV0)
2022-01-10 20:52:11: **** FATAL ********************************* (LV0)
2022-01-10 20:52:11: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:52:11: **** FATAL ********************************* (LV0)
2022-01-10 20:52:02: **** FATAL ********************************* (LV0)
2022-01-10 20:52:02: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:52:02: **** FATAL ********************************* (LV0)
2022-01-10 20:51:51: **** FATAL ********************************* (LV0)
2022-01-10 20:51:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:51: **** FATAL ********************************* (LV0)
2022-01-10 20:51:41: **** FATAL ********************************* (LV0)
2022-01-10 20:51:41: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:41: **** FATAL ********************************* (LV0)
2022-01-10 20:51:31: **** FATAL ********************************* (LV0)
2022-01-10 20:51:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:31: **** FATAL ********************************* (LV0)
2022-01-10 20:51:21: **** FATAL ********************************* (LV0)
2022-01-10 20:51:21: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:21: **** FATAL ********************************* (LV0)
2022-01-10 20:51:11: **** FATAL ********************************* (LV0)
2022-01-10 20:51:11: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:11: **** FATAL ********************************* (LV0)
2022-01-10 20:51:01: **** FATAL ********************************* (LV0)
2022-01-10 20:51:01: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:51:01: **** FATAL ********************************* (LV0)
2022-01-10 20:50:51: **** FATAL ********************************* (LV0)
2022-01-10 20:50:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:50:51: **** FATAL ********************************* (LV0)
2022-01-10 20:50:42: **** FATAL ********************************* (LV0)
2022-01-10 20:50:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:50:42: **** FATAL ********************************* (LV0)
2022-01-10 20:50:32: **** FATAL ********************************* (LV0)
2022-01-10 20:50:32: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:50:32: **** FATAL ********************************* (LV0)
2022-01-10 20:50:22: **** FATAL ********************************* (LV0)
2022-01-10 20:50:22: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:50:22: **** FATAL ********************************* (LV0)
2022-01-10 20:50:13: **** FATAL ********************************* (LV0)
2022-01-10 20:50:13: **** FATAL Regulation loop needs 11 seconds (LV0)
2022-01-10 20:50:13: **** FATAL ********************************* (LV0)
2022-01-10 20:50:05: **** FATAL ********************************* (LV0)
2022-01-10 20:50:05: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:50:05: **** FATAL ********************************* (LV0)
2022-01-10 20:50:04: ##### cron5min.sh finished ##### (LV0)
2022-01-10 20:50:02: ##### cron5min.sh started ##### (LV0)
2022-01-10 20:49:51: **** FATAL ********************************* (LV0)
2022-01-10 20:49:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:49:51: **** FATAL ********************************* (LV0)
2022-01-10 20:49:42: **** FATAL ********************************* (LV0)
2022-01-10 20:49:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:49:42: **** FATAL ********************************* (LV0)
2022-01-10 20:49:32: **** FATAL ********************************* (LV0)
2022-01-10 20:49:32: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:49:32: **** FATAL ********************************* (LV0)
2022-01-10 20:49:22: **** FATAL ********************************* (LV0)
2022-01-10 20:49:22: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:49:22: **** FATAL ********************************* (LV0)
2022-01-10 20:49:14: **** FATAL ********************************* (LV0)
2022-01-10 20:49:14: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:49:14: **** FATAL ********************************* (LV0)
2022-01-10 20:49:02: **** FATAL ********************************* (LV0)
2022-01-10 20:49:02: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:49:02: **** FATAL ********************************* (LV0)
2022-01-10 20:48:51: **** FATAL ********************************* (LV0)
2022-01-10 20:48:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:48:51: **** FATAL ********************************* (LV0)
2022-01-10 20:48:41: **** FATAL ********************************* (LV0)
2022-01-10 20:48:40: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:48:40: **** FATAL ********************************* (LV0)
2022-01-10 20:48:31: **** FATAL ********************************* (LV0)
2022-01-10 20:48:31: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:48:31: **** FATAL ********************************* (LV0)
2022-01-10 20:48:21: **** FATAL ********************************* (LV0)
2022-01-10 20:48:21: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:48:21: **** FATAL ********************************* (LV0)
2022-01-10 20:48:14: **** FATAL ********************************* (LV0)
2022-01-10 20:48:14: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:48:14: **** FATAL ********************************* (LV0)
2022-01-10 20:48:02: **** FATAL ********************************* (LV0)
2022-01-10 20:48:02: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:48:02: **** FATAL ********************************* (LV0)
2022-01-10 20:47:53: **** FATAL ********************************* (LV0)
2022-01-10 20:47:53: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:47:53: **** FATAL ********************************* (LV0)
2022-01-10 20:47:42: **** FATAL ********************************* (LV0)
2022-01-10 20:47:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:47:42: **** FATAL ********************************* (LV0)
2022-01-10 20:47:31: **** FATAL ********************************* (LV0)
2022-01-10 20:47:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:47:31: **** FATAL ********************************* (LV0)
2022-01-10 20:47:21: **** FATAL ********************************* (LV0)
2022-01-10 20:47:21: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:47:21: **** FATAL ********************************* (LV0)
2022-01-10 20:47:11: **** FATAL ********************************* (LV0)
2022-01-10 20:47:11: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:47:11: **** FATAL ********************************* (LV0)
2022-01-10 20:47:02: **** FATAL ********************************* (LV0)
2022-01-10 20:47:02: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:47:02: **** FATAL ********************************* (LV0)
2022-01-10 20:46:52: **** FATAL ********************************* (LV0)
2022-01-10 20:46:52: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:46:52: **** FATAL ********************************* (LV0)
2022-01-10 20:46:41: **** FATAL ********************************* (LV0)
2022-01-10 20:46:41: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:46:41: **** FATAL ********************************* (LV0)
2022-01-10 20:46:34: **** FATAL ********************************* (LV0)
2022-01-10 20:46:34: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:46:34: **** FATAL ********************************* (LV0)
2022-01-10 20:46:21: **** FATAL ********************************* (LV0)
2022-01-10 20:46:21: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:46:21: **** FATAL ********************************* (LV0)
2022-01-10 20:46:11: **** FATAL ********************************* (LV0)
2022-01-10 20:46:11: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:46:11: **** FATAL ********************************* (LV0)
2022-01-10 20:46:01: **** FATAL ********************************* (LV0)
2022-01-10 20:46:01: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:46:01: **** FATAL ********************************* (LV0)
2022-01-10 20:45:51: **** FATAL ********************************* (LV0)
2022-01-10 20:45:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:51: **** FATAL ********************************* (LV0)
2022-01-10 20:45:41: **** FATAL ********************************* (LV0)
2022-01-10 20:45:41: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:41: **** FATAL ********************************* (LV0)
2022-01-10 20:45:31: **** FATAL ********************************* (LV0)
2022-01-10 20:45:31: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:31: **** FATAL ********************************* (LV0)
2022-01-10 20:45:22: **** FATAL ********************************* (LV0)
2022-01-10 20:45:22: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:22: **** FATAL ********************************* (LV0)
2022-01-10 20:45:11: **** FATAL ********************************* (LV0)
2022-01-10 20:45:11: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:11: **** FATAL ********************************* (LV0)
2022-01-10 20:45:04: ##### cron5min.sh finished ##### (LV0)
2022-01-10 20:45:03: modbus tcp server not running! restarting process (LV0)
2022-01-10 20:45:02: ##### cron5min.sh started ##### (LV0)
2022-01-10 20:45:01: **** FATAL ********************************* (LV0)
2022-01-10 20:45:01: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:45:01: **** FATAL ********************************* (LV0)
2022-01-10 20:44:51: **** FATAL ********************************* (LV0)
2022-01-10 20:44:51: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:44:51: **** FATAL ********************************* (LV0)
2022-01-10 20:44:42: **** FATAL ********************************* (LV0)
2022-01-10 20:44:42: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:44:42: **** FATAL ********************************* (LV0)
2022-01-10 20:44:32: **** FATAL ********************************* (LV0)
2022-01-10 20:44:32: **** FATAL Regulation loop needs 9 seconds (LV0)
2022-01-10 20:44:32: **** FATAL ********************************* (LV0)
2022-01-10 20:44:23: **** FATAL ********************************* (LV0)
2022-01-10 20:44:23: **** FATAL Regulation loop needs 11 seconds (LV0)
2022-01-10 20:44:23: **** FATAL ********************************* (LV0)
2022-01-10 20:44:16: **** FATAL ********************************* (LV0)
2022-01-10 20:44:16: **** FATAL Regulation loop needs 11 seconds (LV0)
2022-01-10 20:44:16: **** FATAL ********************************* (LV0)
2022-01-10 20:44:13: **** FATAL ********************************* (LV0)
2022-01-10 20:44:13: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:44:13: **** FATAL ********************************* (LV0)
2022-01-10 20:44:03: **** FATAL ********************************* (LV0)
2022-01-10 20:44:03: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:44:03: **** FATAL ********************************* (LV0)
loadvars.sh: Zeile 1883: ramdisk/mqttslavemode: Datei oder Verzeichnis nicht gefunden
modules/goelp1/main.sh: Zeile 45: /var/www/html/openWB/ramdisk/tmpgoelp1rfid: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 70: ramdisk/mqttstopchargeafterdisclp8: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 69: ramdisk/mqttstopchargeafterdisclp7: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 68: ramdisk/mqttstopchargeafterdisclp6: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 67: ramdisk/mqttstopchargeafterdisclp5: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 66: ramdisk/mqttstopchargeafterdisclp4: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 65: ramdisk/mqttstopchargeafterdisclp3: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 64: ramdisk/mqttstopchargeafterdisclp2: Datei oder Verzeichnis nicht gefunden
loadvars.sh: Zeile 63: ramdisk/mqttstopchargeafterdisclp1: Datei oder Verzeichnis nicht gefunden
2022-01-10 20:43:48: boot done :-)
AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
fix upload limit...OS Stretch
not activated, skipping
etprovider...
2022-01-10 20:43:43: Ramdisk not set up. Maybe we are still booting. (LV0) at 43 main /var/www/html/openWB/regel.sh
update broker...
load versions...
grep: /home/pi/.config/lxsession/LXDE-pi/autostart: Datei oder Verzeichnis nicht gefunden
display update...
clear warning...

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100    41    0     0  100    41      0    122 --:--:-- --:--:-- --:--:--   122
                                 Dload  Upload   Total   Spent    Left  Speed
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
version...
Successfully installed urllib3-1.26.8
Installing collected packages: urllib3
  Using cached https://files.pythonhosted.org/packages/4e/b8/f5a25b22e803f0578e668daa33ba3701bb37858ec80e08a150bd7d2cf1b1/urllib3-1.26.8-py2.py3-none-any.whl
2022-01-10 20:43:32: Ramdisk not set up. Maybe we are still booting. (LV0) at 43 main /var/www/html/openWB/regel.sh
Collecting urllib3
ipparser installed...
jq installed...
python requests installed...
2022-01-10 20:43:22: Ramdisk not set up. Maybe we are still booting. (LV0) at 43 main /var/www/html/openWB/regel.sh
pymodbus installed...
aiohttp installed...
certifi installed...
docopt installed...
mqtt installed...
packages 2...
updating mosquitto config file
mosquitto...
cp: '/usr/share/zoneinfo/Europe/Berlin' und '/etc/localtime' sind die gleiche Datei
timezone...
evdev installed...
2022-01-10 20:43:16: PID: 1630: legacy run server: Starting legacy run server
packages 1...
crontab 2...
...changed
apache...
LAN/WLAN...
2022-01-10 20:43:15: Ramdisk not set up. Maybe we are still booting. (LV0) at 43 main /var/www/html/openWB/regel.sh
crontab 1...
Starting legacy run server
legacy run server...
mqtt handler...
smarthome handler...
Ramdisk init done.
Trigger update of logfiles...
'mqttwizzarddone' missing: Setting to provided default value '-1'
'mqttwattbezug' missing: Setting to provided default value '-1'
'mqttversion' missing: Setting to provided default value '-1'
'mqttverbraucher2_name' missing: Setting to provided default value 'notset'
'mqttverbraucher2_aktiv' missing: Setting to provided default value '-1'
'mqttverbraucher1_name' missing: Setting to provided default value 'notset'
'mqttverbraucher1_aktiv' missing: Setting to provided default value '-1'
'mqttupdateinprogress' missing: Setting to provided default value '-1'
'mqttu1p3pstandby' missing: Setting to provided default value '-1'
'mqttu1p3psofort' missing: Setting to provided default value '-1'
'mqttu1p3pnurpv' missing: Setting to provided default value '-1'
'mqttu1p3pnl' missing: Setting to provided default value '-1'
'mqttu1p3pminundpv' missing: Setting to provided default value '-1'
'mqttu1p3paktiv' missing: Setting to provided default value '-1'
'mqttstopchargepvpercentagelp2' missing: Setting to provided default value '-1'
'mqttstopchargepvpercentagelp1' missing: Setting to provided default value '-1'
'mqttstopchargepvatpercentlp2' missing: Setting to provided default value '-1'
'mqttstopchargepvatpercentlp1' missing: Setting to provided default value '-1'
'mqttspeicherwattnurpv' missing: Setting to provided default value '-1'
'mqttspeichersocnurpv' missing: Setting to provided default value '-1'
'mqttspeichersocminpv' missing: Setting to provided default value '-1'
'mqttspeichersochystminpv' missing: Setting to provided default value '-1'
'mqttspeicherpvui' missing: Setting to provided default value '-1'
'mqttspeicherpveinbeziehen' missing: Setting to provided default value '-1'
'mqttspeichermaxwatt' missing: Setting to provided default value '-1'
'mqttsofortsocstatlp2' missing: Setting to provided default value '-1'
'mqttsofortsocstatlp1' missing: Setting to provided default value '-1'
'mqttsofortsoclp2' missing: Setting to provided default value '-1'
'mqttsofortsoclp1' missing: Setting to provided default value '-1'
'mqttsocvorhanden' missing: Setting to provided default value '-1'
'mqttsoc' missing: Setting to provided default value '-1'
'mqttsoc1vorhanden' missing: Setting to provided default value '-1'
'mqttrfidakt' missing: Setting to provided default value '-1'
'mqttrestzeitlp3' missing: Setting to provided default value '-1'
'mqttrestzeitlp2' missing: Setting to provided default value '-1'
'mqttrestzeitlp1' missing: Setting to provided default value '-1'
'mqttpvwatt' missing: Setting to provided default value '-1'
'mqttpvbezugeinspeisung' missing: Setting to provided default value '-1'
'mqttpreisjekwh' missing: Setting to provided default value '-1'
'mqttoffsetpv' missing: Setting to provided default value '-1'
'mqttnurpv70dynw' missing: Setting to provided default value '-1'
'mqttnurpv70dynact' missing: Setting to provided default value '-1'
'mqttnlakt_standby' missing: Setting to provided default value '-1'
'mqttnlakt_sofort' missing: Setting to provided default value '-1'
'mqttnlakt_nurpv' missing: Setting to provided default value '-1'
'mqttnlakt_minpv' missing: Setting to provided default value '-1'
'mqttnachtladens1' missing: Setting to provided default value '-1'
'mqttnachtladen' missing: Setting to provided default value '-1'
'mqttminnurpvsoclp1' missing: Setting to provided default value '-1'
'mqttminnurpvsocll' missing: Setting to provided default value '-1'
'mqttminimalstromstaerke' missing: Setting to provided default value '-1'
'mqttminimalapv' missing: Setting to provided default value '-1'
'mqttminimalampv' missing: Setting to provided default value '-1'
'mqttminimalalp2pv' missing: Setting to provided default value '-1'
'mqttmindestuberschuss' missing: Setting to provided default value '-1'
'mqttmaxnurpvsoclp1' missing: Setting to provided default value '-1'
'mqttmaximalstromstaerke' missing: Setting to provided default value '-1'
'mqttlastlademodus' missing: Setting to provided default value '-1'
'mqttlademstats2' missing: Setting to provided default value '-1'
'mqttlademstats1' missing: Setting to provided default value '-1'
'mqttlademstatlp8' missing: Setting to provided default value '-1'
'mqttlademstatlp7' missing: Setting to provided default value '-1'
'mqttlademstatlp6' missing: Setting to provided default value '-1'
'mqttlademstatlp5' missing: Setting to provided default value '-1'
'mqttlademstatlp4' missing: Setting to provided default value '-1'
'mqttlademstat' missing: Setting to provided default value '-1'
'mqttlademkwhlp8' missing: Setting to provided default value '-1'
'mqttlademkwhlp7' missing: Setting to provided default value '-1'
'mqttlademkwhlp6' missing: Setting to provided default value '-1'
'mqttlademkwhlp5' missing: Setting to provided default value '-1'
'mqttlademkwhlp4' missing: Setting to provided default value '-1'
'mqttlademkwh' missing: Setting to provided default value '-1'
'mqtthook3_aktiv' missing: Setting to provided default value '-1'
'mqtthook2_aktiv' missing: Setting to provided default value '-1'
'mqtthook1_aktiv' missing: Setting to provided default value '-1'
'mqttheutegeladen' missing: Setting to provided default value '-1'
'mqtthausverbrauchstat' missing: Setting to provided default value '-1'
'mqtthausverbrauch' missing: Setting to provided default value '-1'
'mqttevuglaettungakt' missing: Setting to provided default value '-1'
'mqttetprovider' missing: Setting to provided default value 'notset'
'mqttetprovideraktiv' missing: Setting to provided default value '-1'
'mqtteinschaltverzoegerung' missing: Setting to provided default value '-1'
'mqttdurchslp1' missing: Setting to provided default value '-1'
'mqttdisplayspeichermax' missing: Setting to provided default value '-1'
'mqttdisplaypvmax' missing: Setting to provided default value '-1'
'mqttdisplayhausmax' missing: Setting to provided default value '-1'
'mqttdisplayhausanzeigen' missing: Setting to provided default value '-1'
'mqttdisplayevumax' missing: Setting to provided default value '-1'
'mqttdatenschutzack' missing: Setting to provided default value '-1'
'mqttdailychargelp3' missing: Setting to provided default value '-1'
'mqttdailychargelp2' missing: Setting to provided default value '-1'
'mqttdailychargelp1' missing: Setting to provided default value '-1'
'mqttaktgeladens2' missing: Setting to provided default value '-1'
'mqttaktgeladens1' missing: Setting to provided default value '-1'
'mqttaktgeladen' missing: Setting to provided default value '-1'
'mqttadaptpv' missing: Setting to provided default value '-1'
'mqttadaptfaktor' missing: Setting to provided default value '-1'
'mqttabschaltverzoegerung' missing: Setting to provided default value '-1'
'mqttabschaltuberschuss' missing: Setting to provided default value '-1'
'mqttRandomSleepValue' missing: Setting to provided default value '-1'
'mqttCp1Configured' missing: Setting to provided default value '-1'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp8' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp8' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp8max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp8name' missing: no MQTT topic set: Setting to default of 'Lp8'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp8' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp8' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp8' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp8' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp8sofortll' missing: Setting from MQTT topic 'lp8sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp8' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp8' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp8' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp8enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp8phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp8' missing: Setting from MQTT topic 'pluggedladungaktlp8' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp8startkwh' missing: Setting from MQTT topic 'pluggedladunglp8startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp7' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp7' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp7max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp7name' missing: no MQTT topic set: Setting to default of 'Lp7'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp7' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp7' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp7' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp7' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp7sofortll' missing: Setting from MQTT topic 'lp7sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp7' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp7' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp7' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp7enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp7phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp7' missing: Setting from MQTT topic 'pluggedladungaktlp7' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp7startkwh' missing: Setting from MQTT topic 'pluggedladunglp7startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp6' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp6' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp6max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp6name' missing: no MQTT topic set: Setting to default of 'Lp6'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp6' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp6' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp6' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp6' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp6sofortll' missing: Setting from MQTT topic 'lp6sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp6' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp6' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp6' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp6enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp6phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp6' missing: Setting from MQTT topic 'pluggedladungaktlp6' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp6startkwh' missing: Setting from MQTT topic 'pluggedladunglp6startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp5' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp5' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp5max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp5name' missing: no MQTT topic set: Setting to default of 'Lp5'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp5' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp5' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp5' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp5' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp5sofortll' missing: Setting from MQTT topic 'lp5sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp5' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp5' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp5' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp5enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp5phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp5' missing: Setting from MQTT topic 'pluggedladungaktlp5' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp5startkwh' missing: Setting from MQTT topic 'pluggedladunglp5startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp4' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp4' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp4max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp4name' missing: no MQTT topic set: Setting to default of 'Lp4'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp4' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp4' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp4' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp4' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp4sofortll' missing: Setting from MQTT topic 'lp4sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp4' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp4' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp4' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp4enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp4phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp4' missing: Setting from MQTT topic 'pluggedladungaktlp4' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp4startkwh' missing: Setting from MQTT topic 'pluggedladunglp4startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp3' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp3' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp3max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp3name' missing: no MQTT topic set: Setting to default of 'Lp3'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp3' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp3' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp3' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/rfidlp3' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp3sofortll' missing: Setting from MQTT topic 'lp3sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp3' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp3' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp3' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp3enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp3phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp3' missing: Setting from MQTT topic 'pluggedladungaktlp3' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp3startkwh' missing: Setting from MQTT topic 'pluggedladunglp3startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp2' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp2' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp2max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp2name' missing: no MQTT topic set: Setting to default of 'Lp2'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp2' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp2' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp2' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp2sofortll' missing: Setting from MQTT topic 'lp2sofortll' to value '10'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp2' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp2' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp2' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp2enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp2phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp2' missing: Setting from MQTT topic 'pluggedladungaktlp2' to value '0'
'/var/www/html/openWB/ramdisk/pluggedladunglp2startkwh' missing: Setting from MQTT topic 'pluggedladunglp2startkwh' to value '0'
'/var/www/html/openWB/ramdisk/mqttautolockconfiguredlp1' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttautolockstatuslp1' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttdisplaylp1max' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttlp1name' missing: no MQTT topic set: Setting to default of 'Lp1'
'/var/www/html/openWB/ramdisk/mqttmsmoduslp1' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/mqttzielladenaktivlp1' missing: no MQTT topic set: Setting to default of '-1'
'/var/www/html/openWB/ramdisk/boolstopchargeafterdisclp1' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp1sofortll' missing: Setting from MQTT topic 'lp1sofortll' to value '6'
'/var/www/html/openWB/ramdisk/autolockconfiguredlp1' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/autolockstatuslp1' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/restzeitlp1' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/lp1enabled' missing: no MQTT topic set: Setting to default of '1'
'/var/www/html/openWB/ramdisk/lp1phasen' missing: no MQTT topic set: Setting to default of '0'
'/var/www/html/openWB/ramdisk/pluggedladungaktlp1' missing: Setting from MQTT topic 'pluggedladungaktlp1' to value '1'
'/var/www/html/openWB/ramdisk/pluggedladunglp1startkwh' missing: Setting from MQTT topic 'pluggedladunglp1startkwh' to value '0'
Initializing Ramdisk /var/www/html/openWB/ramdisk
Config file Update done.
Updating /var/www/html/openWB/openwb.conf...
touch: '/var/www/html/openWB/web/backup/.donotdelete' kann nicht berührt werden: Keine Berechtigung
loading config
atreboot.sh started
2022-01-10 20:42:18: **** Regulation loop needs 7 seconds (LV0)
2022-01-10 20:42:11: **** FATAL ********************************* (LV0)
2022-01-10 20:42:11: **** FATAL Regulation loop needs 10 seconds (LV0)
2022-01-10 20:42:11: **** FATAL ********************************* (LV0)

Scheint ein anderweitiges Problem zu sein, oder wie siehst du das? WB ist ein go-e Charger

Ich teste morgen die Laderegelung über die WB; soll lt. Vorhersage sonnig werden...ich berichte!

[skoot]

Hallo,

das Skript läuft bei mir und die Werte werden auch fast richtig angezeigt.
Das Problem ist nur das ich ein kaskadiertes System aus 2x Senec Home V2.1 habe und mir deshalb nur die Ladeleistung von einem System angezeigt wird. Das einfachste wäre nun die Lade/Entladeleistung der Batterie mal 2 zu nehmen. Im Skript steht zwar etwas von "multiplier" aber bin mir nicht sicher wie ich da die richtigen Werte einstelle. Was ich bis jetzt probiert habe hat zumindest nicht funktioniert.
Oder gibt es eine zweite Möglichkeit die Werte vom zweiten System (hat eine andere IP) mit abzufragen und zu verrechnen?

Gruß
Klaus