Konfigurationsprobleme nach Update auf Software 2.0

Stefan · Beitrag von **Stefan** » Do Aug 10, 2023 4:48 pm

Hallo,

ich habe eine DIY-openWB mit zwei Ladepunkten, die schon mehrere Jahre reibungslos funktioniert. Die openWB verfügt über zwei Ladepunkte: der erste mit Buchse und Verriegelung (über AddOn-Platine) und der zweite mit fest angeschlagenem Kabel.

Ich habe mir nun im Shop eine SD-Karte mit der neuen Software 2 bestellt, die Karte getauscht und die neue Software konfiguriert.

Den ersten Ladepunkt habe ich als Interne openWB und dann "openWB series 1/2 (Buchse)" konfiguriert und den zweiten als interne openWB und dann "openWB series 1/2 (Duo)". Hier habe ich die Ladepunkt-Nummer auf "2" gestellt.

Im Status werden beide Ladepunkte als fehlerfrei und unter anderem die aktuelle Spannung angezeigt.

Mit dieser Konfiguration lädt die openWB am ersten Ladepunkt, jedoch wird die Buchse nicht mehr wie bisher verriegelt. Am zweiten Ladepunkt wird keine Ladung gestartet.

Habe ich meine Ladepunkte falsch konfiguriert?

Gerne kann ich Auszüge aus der Config von Software 1.9 oder Logs aus der Software 2.0 bereitstellen.

Herzliche Grüße

Stefan

LutzB · Beitrag von **LutzB** » Fr Aug 11, 2023 5:29 am

Stefan hat geschrieben: ↑Do Aug 10, 2023 4:48 pm Gerne kann ich Auszüge aus der Config von Software 1.9 oder Logs aus der Software 2.0 bereitstellen.

Ohne weitere Infos wird Dir niemand helfen können.

aiole · Beitrag von **aiole** » Fr Aug 11, 2023 10:52 am

Stefan hat geschrieben: ↑Do Aug 10, 2023 4:48 pm Den ersten Ladepunkt habe ich als Interne openWB und dann "openWB series 1/2 (Buchse)" konfiguriert und den zweiten als interne openWB und dann "openWB series 1/2 (Duo)". Hier habe ich die Ladepunkt-Nummer auf "2" gestellt.

Klingt sehr speziell. Duo mit LP1-Buchse und LP2-normal? Gab's das offiziell?
Die oWB-Buchse kenne ich nur als EIN LP.

Ich hätte 2 Ideen:
1. wie aktuell: LP1-Buchse als normale oWB ohne Verriegelung betreiben. -> klassische Duo (als primary)
2. LP1 als Buchse/primary und für LP2 einen 2. RPi als secondary. Diesen dann als "externe oWB" in den primary einbinden.

Stefan · Beitrag von **Stefan** » Di Aug 15, 2023 6:46 am

Hallo LutzB,

LutzB hat geschrieben: ↑Fr Aug 11, 2023 5:29 am Ohne weitere Infos wird Dir niemand helfen können.

vielen Dank für deine Unterstützung! Ich wollte nicht random einfach seitenweise Config-Dateien oder Logbuchauszüge posten.

In Software 1.9 habe ich die Ladepunkte wie folgt konfiguriert:

Hier noch die openwb.conf in Version 1.9:

Code: Alles auswählen

debug=0
minimalstromstaerke=12
maximalstromstaerke=32
evsecon=buchse
dacregister=62
modbusevsesource=/dev/ttyUSB0
modbusevseid=1
modbusevselanip=10.20.0.180
evsecons1=modbusevse
evsesources1=/dev/ttyUSB0
evseids1=2
evselanips1=10.20.0.180
sdmids1=2
ladeleistungs1modul=mpm3pmlls1
evsecons2=simpleevsewifi
evsesources2=/dev/virtualcom2
evseids2=1
evselanips2=10.20.0.181
sdmids2=3
ladeleistungs2modul=simpleevsewifis2
lastmanagement=1
lastmmaxw=
lastmaxap1=50
lastmaxap2=50
lastmaxap3=50
wattbezugmodul=bezug_fronius_sm
vzloggerip=10.20.0.51:8080
vzloggerline=13
vzloggerkwhline=25
vzloggerekwhline=37
sdm630modbusbezugid=1
sdm630modbusbezugsource=/dev/ttyUSB0
sdm630modbusbezuglanip=10.20.0.180
pvwattmodul=wr_fronius
wrfroniusip=192.168.178.198
sdm630modbuswrsource=/dev/virtualcom2
sdm630modbuswrlanip=192.168.0.24
sdm630modbuswrid=3
vzloggerpvip=10.20.0.51:8080
vzloggerpvline=13
ladeleistungmodul=llbuchse
sdm630modbusllid=103
sdm630modbusllsource=/dev/ttyUSB0
sdm630modbuslllanip=10.20.0.180
socmodul=soc_vwid
hsocip='10.0.0.110/soc.txt'
hsocip1='http://10.0.0.110/soc.txt'
nachtladen=1
nachtll=12
nachtladenabuhr=20
nachtladenbisuhr=7
nachtsoc=30
nachtsoc1=15
mindestuberschuss=1500
abschaltuberschuss=5
sofortll=15
sofortlls1=32
sofortlls2=13
smaemdbezugid=1900123456
smaemdpvid=1900123456
smaemdllid=1900123456
dacregisters1=12
dacregisters2=12
wr_http_w_url='http://10.20.0.63/haus/ramdisk/pvwatt'
socmodul1=soc_myrenaultlp2
wr_http_kwh_url='http://10.20.0.63/haus/ramdisk/pvewh'
bezug_http_w_url='http://192.168.0.17/bezugwatt.txt'
bezug_http_ikwh_url='http://192.168.0.17/bezugwh.txt'
bezug_http_ekwh_url='http://192.168.0.17/einspeisungwh.txt'
abschaltverzoegerung=600
pvbezugeinspeisung=0
minimalapv=6
minimalampv=8
lastmanagements2=0
dspeed=0
durchslp1=20
durchslp2=17
durchslp3=17
nachtladens1=1
nachtsocs1=100
nachtsoc1s1=100
nachtlls1=12
nachtladenabs1=20
nachtladenbisuhrs1=8
lademstat=0
lademstats1=0
lademstats2=0
lademkwh=4
lademkwhs1=8
lademkwhs2=2
sdm120modbusllid1s1=20
sdm120modbusllid2s1=21
sdm120modbusllid3s1=22
sdm120modbusllid1s2=20
sdm120modbusllid2s2=21
sdm120modbusllid3s2=22
sdm120modbusllid1=2
sdm120modbusllid2=254
sdm120modbusllid3=254
evsewifiiplp3=10.20.0.98
evsewifitimeoutlp3=2
evsewifiiplp2=10.20.0.98
evsewifitimeoutlp2=1
evsewifiiplp1=10.20.0.98
evsewifitimeoutlp1=1
sofortsoclp1=95
sofortsoclp2=95
sofortsoclp3=
sofortsocstatlp1=1
sofortsocstatlp2=0
sofortsocstatlp3=
pvsoclp1=100
pvsoclp2=100
pvsoclp3=100
mpm3pmllsource=/dev/ttyUSB0
mpm3pmllid=105
msmoduslp1=0
msmoduslp2=2
leafusernames1=demo2@nissan.de
leafpassworts1='demopass'
leafusername=demo@demo
leafpasswort='deinpasswort'
i3username=demo@bmw.de
i3passwort='passwort'
i3vin=dieVIN
i3usernames1=demo@bmw.de
i3passworts1='passwort'
i3vins1=dieVIN
zoeusername=user@zoe.de
zoepasswort='passwort'
minnurpvsocll=12
minnurpvsoclp1=50
maxnurpvsoclp1=95
evnotifyakey=f1ef03
evnotifypasswort=openwb
wrjsonwatt='.PowerOut'
wrjsonkwh='.PowerProduced'
wrjsonurl='http://192.168.0.12/solar_api'
hausbezugnone=400
mpm3pmpvid=101
mpm3pmpvsource=/dev/ttyUSB14
mpm3pmpvlanip=192.168.0.11
nachtladenabuhrs1=20
bezugjsonwatt='.watt | .[1]'
bezugjsonkwh='.kwh'
einspeisungjsonkwh='.kwh'
bezugjsonurl='http://192.168.0.12/solar_api'
mpm3pmlls1source=/dev/ttyUSB0
mpm3pmlls1id=106
mpm3pmevusource=/dev/ttyUSB0
sdm120modbusllsource=/dev/ttyUSB0
mpm3pmevuid=1
livegraph=30
bezug_solarlog_ip='10.20.0.181'
speichermodul=speicher_fronius
speichersoc_http='http://10.20.0.63/haus/ramdisk/battsoc'
speicherleistung_http='http://10.20.0.63/haus/ramdisk/battleistung'
soc_tesla_username=deine@email.com
soc_tesla_password='deinpasswort'
soc_tesla_intervall=15
releasetrain=stable
soci3intervall=10
soci3intervall1=10
mpm3pmlls2source=/dev/ttyUSB0
mpm3pmlls2id=5
soc_tesla_intervallladen=20
wrkostalpikoip=192.168.0.10
solaredgeip='192.168.0.10'
solaredgepvip='192.168.0.10'
lllaniplp2=192.168.0.10
sdm630lp2source=/dev/ttyUSB0
sdm120lp2source=/dev/ttyUSB0
sdm120lp3source=/dev/ttyUSB0
sdm630lp3source=/dev/ttyUSB0
lllaniplp3=192.168.0.10
lp1name='Haus'
lp2name='Garage'
lp3name='LP3'
loadsharinglp12=1
loadsharingalp12=32
goeiplp1=192.168.0.15
goetimeoutlp1=5
goeiplp2=192.168.0.15
goetimeoutlp2=5
goeiplp3=192.168.0.15
goetimeoutlp3=5
pushbenachrichtigung=0
pushovertoken='demotoken'
pushoveruser='demouser'
pushbstartl=1
pushbstopl=1
smashmbezugid=1234567789
mpm3pmspeichersource=/dev/tty2
mpm3pmspeicherid=8
mpm3pmspeicherpv=0
mpm3pmspeicherlanip=192.168.5.10
logdailywh=
logeinspeisungneg=
speicherpveinbeziehen=1
nacht2lls1=12
nachtladen2abuhrs1=7
nachtladen2bisuhrs1=7
nacht2ll=12
nachtladen2abuhr=7
nachtladen2bisuhr=7
akkuglp1=58
akkuglp2=22
zielladenuhrzeitlp1='2018-12-19 06:15'
zielladensoclp1=60
zielladenalp1=10
zielladenphasenlp1=3
zielladenmaxalp1=32
zielladenaktivlp1=0
bezug_smartme_user='user'
bezug_smartme_pass='pass'
bezug_smartme_url='https://smart-me.com:443/api/Devices/[ID]'
carnetuser='user'
carnetpass='pass'
soccarnetintervall=10
einschaltverzoegerung=10
zoelp2username=username
zoelp2passwort='passwort'
evnotifytoken=token
solaredgepvslave1=1
solaredgepvslave2=none
solaredgepvslave3=none
speichermaxwatt=0
wr_smartme_user='user'
wr_smartme_pass='pass'
wr_smartme_url='https://smart-me.com:443/api/Devices/[ID]'
bydhvuser=benutzer
bydhvpass='pass'
bydhvip=192.168.10.12
e3dcip=192.168.10.12
bezug_http_l1_url='http://192.168.0.17/bezuga1'
bezug_http_l2_url='http://192.168.0.17/bezuga2'
bezug_http_l3_url='http://192.168.0.17/bezuga3'
sbs25ip=192.168.10.12
tri9000ip=192.168.10.12
solaredgespeicherip='192.168.0.31'
offsetpv=0
kostalplenticoreip=192.168.0.30
hook1ein_url='https://webhook.com/ein.php'
hook1aus_url='https://webhook.com/aus.php'
hook1ein_watt=1200
hook1aus_watt=400
hook1_aktiv=0
nlakt_sofort=1
nlakt_minpv=1
nlakt_nurpv=1
nlakt_standby=1
mpm3pmevuhaus=0
carnetlp2user='user'
carnetlp2pass='pass'
soccarnetlp2intervall=10
soc_teslalp2_username=deine@email.com
soc_teslalp2_password='daspasswort'
soc_teslalp2_intervallladen=20
soc_teslalp2_intervall=20
ladetaster=0
speicherpvui=1
wrsma2ip=none
wrsma3ip=none
wrsma4ip=none
evuglaettung=10
evuglaettungakt=0
u1p3paktiv=0
u1p3psofort=3
u1p3pstandby=3
u1p3pnurpv=1
u1p3pminundpv=1
u1p3pnl=3
speicherpwip=192.168.0.10
adaptpv=0
adaptfaktor=5
grapham=1
graphliveam=0
nrgkickiplp1=192.168.0.17
nrgkicktimeoutlp1=3
nrgkickmaclp1=11:22:33:aa:bb:cc
nrgkickpwlp1=1234
kostalplenticorehaus=0
kostalplenticorebatt=
froniusprimo=0
kebaiplp1=192.168.25.25
kebaiplp2=192.168.25.25
graphinteractiveam=
bezug_smartfox_ip=192.168.0.50
chartlegendmain=
nrgkickiplp2=192.168.0.17
nrgkicktimeoutlp2=3
nrgkickmaclp2=11:22:33:aa:bb:cc
nrgkickpwlp2=1234
hausverbrauchstat=0
minimalalp2pv=8
wr_piko2_user='user'
wr_piko2_pass='pass'
wr_piko2_url='https://url'
theme=standard
solaredgewr2ip='none'
heutegeladen=1
sunnyislandip=192.168.0.17
fsm63a3modbusllsource=/dev/ttyUSB2
fsm63a3modbusllid=8
wakeupzoelp1=0
wakeupzoelp2=0
plz=71144
sonnenecoip=192.168.15.3
speichersocnurpv=20
speichersocminpv=0
speicherwattnurpv=1500
e3dc2ip=none
hook1_ausverz=0
hook1_dauer=5
hook2ein_url='https://webhook.com/ein.php'
hook2aus_url='https://webhook.com/aus.php'
hook2ein_watt=1200
hook2aus_watt=400
hook2_aktiv=0
hook2_dauer=5
hook3ein_url='https://webhook.com/ein.php'
hook3aus_url='https://webhook.com/aus.php'
hook3ein_watt=1200
hook3aus_watt=400
hook3_aktiv=0
hook3_dauer=5
verbraucher1_aktiv=0
verbraucher1_typ=http
verbraucher1_name=Name
verbraucher1_id=10
verbraucher1_ip=192.168.4.123
verbraucher1_source=/dev/ttyUSB5
verbraucher1_urlw='http://url'
verbraucher1_urlh='http://url'
verbraucher1_tempwh=0
verbraucher2_name=Name
verbraucher2_aktiv=0
verbraucher2_typ=http
verbraucher2_urlw='http://url'
verbraucher2_urlh='http://url'
verbraucher2_id=10
verbraucher2_ip=192.168.4.123
verbraucher2_source=/dev/ttyUSB5
verbraucher3_name=Name
verbraucher3_aktiv=0
verbraucher3_typ=http
verbraucher3_urlw='http://url'
verbraucher3_urlh='http://url'
pushbplug=0
wrsmawebbox=0
bootmodus=1
httpll_w_url='http://url'
httpll_kwh_url='http://url'
httpll_a1_url='http://url'
httpll_a2_url='http://url'
httpll_a3_url='http://url'
rfidakt=0
rfidlp1c1=0
rfidlp1c2=0
rfidlp1c3=0
rfidlp2c1=0
rfidlp2c2=0
rfidlp2c3=0
wr_sdm120ip=192.168.3.5
wr_sdm120id=2
bezug_victronip=192.168.15.3
pushbsmarthome=1
graphsocdyn=1
ledsakt=0
led0sofort=aus
led0minpv=aus
led0nurpv=aus
led0stop=aus
led0standby=aus
ledsofort=aus
ledminpv=aus
lednurpv=aus
ledstop=aus
ledstandby=aus
displayconfigured=0
displayaktiv=0
displaysleep=60
displayevumax=5000
displaypvmax=10000
displayspeichermax=3000
displayhausanzeigen=1
displayhausmax=5000
displaylp1max=22000
displaylp2max=22000
displaypinaktiv=0
displaypincode=1234
settingspw='openwb'
settingspwakt=0
netzabschaltunghz=1
hook1einschaltverz=20
stopsocnotpluggedlp1=0
sonnenecoalternativ=0
rseenabled=0
evnotifyakeylp2=abcdef
evnotifytokenlp2=token
twcmanagerlp1ip='192.168.0.15'
twcmanagerlp1phasen=3
bezug_solarlog_speicherv=0
wrfronius2ip=none
displaytheme=0
displaytagesgraph=1
displayEinBeimAnstecken=1
soc_tesla_carnumber=0
kostalplenticoreip2=none
name_wechselrichter1=WR1
name_wechselrichter2=WR2
angesteckthooklp1_url='https://webhook.com/ein.php'
angesteckthooklp1=0
hook2_ausverz=0
hook3_ausverz=0
verbraucher2_tempwh=0
vartaspeicherip=192.168.0.10
wakeupmyrenaultlp1=1
wakeupmyrenaultlp2=1
rfidsofort=000
rfidstandby=000
rfidstop=000
rfidnurpv=000
rfidminpv=000
rfidsofort2=000
rfidstandby2=000
rfidstop2=000
rfidnurpv2=000
rfidminpv2=000
rfidsofort3=000
rfidstandby3=000
rfidstop3=
rfidnurpv3=000
rfidminpv3=000
cpunterbrechunglp1=1
cpunterbrechunglp2=1
soc_zerong_username=deine@email.com
soc_zerong_password='daspasswort'
soc_zerong_intervallladen=10
soc_zerong_intervall=20
soc_zeronglp2_username=
soc_zeronglp2_password='daspasswort'
soc_zeronglp2_intervallladen=10
soc_zeronglp2_intervall=20
alphaessip=192.168.193.31
solarview_hostname=192.168.0.31
solarview_port=80
discovergyuser=name@mail.de
discovergypass='passwort'
discovergyevuid=idesmeters
discovergypvid=idesmeters
mollp1moab=06:00
mollp1mobis=06:00
mollp1diab=06:00
mollp1dibis=06:00
mollp1miab=06:00
mollp1mibis=06:00
mollp1doab=06:00
mollp1dobis=06:00
mollp1frab=06:00
mollp1frbis=06:00
mollp1sabis=06:00
mollp1soab=06:00
mollp1sobis=06:00
mollp1saab=06:00
mollp1moll=13
mollp1dill=13
mollp1mill=13
mollp1doll=13
mollp1frll=13
mollp1sall=13
mollp1soll=13
wryoulessip=192.168.0.3
soc_audi_username=demo@demo.de
soc_audi_passwort='passwort'
lgessv1ip=youripaddress
lgessv1pass='regnum_as_default_password'
ess_api_ver=01.2020
mpmlp4ip=192.168.193.54
mpmlp5ip=192.168.193.55
mpmlp6ip=192.168.193.56
mpmlp7ip=192.168.193.57
mpmlp8ip=192.168.193.58
mpmlp4id=14
mpmlp5id=15
mpmlp6id=16
mpmlp7id=17
mpmlp8id=18
lastmanagementlp4=0
lastmanagementlp5=0
lastmanagementlp6=0
lastmanagementlp7=0
lastmanagementlp8=0
evseconlp4=ipevse
evseconlp5=ipevse
evseconlp6=ipevse
evseconlp7=ipevse
evseconlp8=ipevse
evseidlp4=24
evseidlp5=25
evseidlp6=26
evseidlp7=27
evseidlp8=28
evseiplp4=192.168.193.44
evseiplp5=192.168.193.45
evseiplp6=192.168.193.46
evseiplp7=192.168.193.47
evseiplp8=192.168.193.48
sofortlllp4=13
sofortlllp5=13
sofortlllp6=13
sofortlllp7=13
sofortlllp8=13
lademkwhlp4=10
lademkwhlp5=10
lademkwhlp6=10
lademkwhlp7=10
lademkwhlp8=10
durchslp4=20
durchslp5=20
durchslp6=20
durchslp7=20
durchslp8=20
evseidlp1=21
evseidlp2=22
evseidlp3=23
evseiplp1=192.168.193.41
evseiplp2=192.168.193.42
evseiplp3=192.168.193.43
mpmlp1ip=192.168.193.51
mpmlp2ip=192.168.193.52
mpmlp3ip=192.168.193.53
mpmlp1id=11
mpmlp2id=12
mpmlp3id=13
lp4name='LP4'
lp5name='LP5'
lp6name='LP6'
lp7name='LP7'
lp8name='LP8'
simplemode=0
lademstatlp4=01
lademstatlp5=0
lademstatlp6=0
lademstatlp7=0
lademstatlp8=0
stopchargeafterdisclp1=0
stopchargeafterdisclp2=0
stopchargeafterdisclp3=0
stopchargeafterdisclp4=0
stopchargeafterdisclp5=0
stopchargeafterdisclp6=0
stopchargeafterdisclp7=0
stopchargeafterdisclp8=0
myrenault_userlp1=stefan@xxxxxxxxxxxx
myrenault_passlp1='xxxxxxxxxxxxxxxx'
myrenault_locationlp1=de_DE
myrenault_countrylp1=DE
myrenault_userlp2=stefan@xxxxxxxxxxxxx
myrenault_passlp2='xxxxxxxxxxxxxxxxx'
myrenault_locationlp2=de_DE
myrenault_countrylp2=DE
evukitversion=0
hook2einschaltverz=20
speichersochystminpv=0
nurpvslowup=0
stopchargepvatpercentlp1=0
stopchargepvatpercentlp2=0
stopchargepvpercentagelp1=90
stopchargepvpercentagelp2=90
msmoduslp3=0
msmoduslp4=0
msmoduslp5=0
msmoduslp6=0
msmoduslp7=0
msmoduslp8=0
speicherekwh_http='192.168.0.10/eWh'
speicherikwh_http='192.168.0.10/iWh'
nurpv70dynact=0
nurpv70dynw=6000
soc_teslalp2_carnumber=0
bezug1_ip=192.168.0.17
pv1_ipa=192.168.0.17
pv1_ipb=192.168.0.17
pv1_ipc=192.168.0.17
pv1_ipd=192.168.0.17
pv1_ida=1
pv1_idb=1
pv1_idc=1
pv1_idd=1
speicher1_ip=192.168.0.17
awattarlocation=de
clouduser=leer
cloudpw=leer
rfidlp1start1=000
rfidlp1start2=000
rfidlp1start3=000
rfidlp2start1=000
rfidlp2start2=000
rfidlp2start3=000
rfidlp1start4=000
rfidlp1start5=000
rfidlp2start4=000
rfidlp2start5=000
ksemip=ipdesmeters
pvkitversion=0
wrsunwayspw=passwort
e3dcextprod=0
schieflastmaxa=20
schieflastaktiv=0
wrsunwaysip=192.168.0.10
slavemode=0
slaveModeUseLastChargingPhase=1
slaveModeSlowRamping=1
slaveModeMinimumAdjustmentInterval=15
solarworld_emanagerip=192.192.192.192
femsip=192.168.1.23
pv2wattmodul=none
pv2ip=none
pv2id=1
pv2user=
pv2pass=''
soc_bluelink_email=mail@mail.de
soc_bluelink_password='passwort'
soc_bluelink_pin=1111
soc_bluelink_interval=30
soclp1_vin=none
httpevseip='192.168.0.15'
froniuserzeugung=0
httpll_ip=192.168.0.22
speicherkitversion=0
soc_vin=VIN
socpass='passwort'
socuser=username
solaredgepvslave4=none
soc2user=username
soc2pass='passwort'
femskacopw=user
isss=0
chargep1ip=192.168.1.100
chargep2ip=192.168.1.100
chargep3ip=192.168.1.100
chargep4ip=
chargep5ip=
chargep6ip=
chargep7ip=
chargep8ip=
datenschutzack=1
wr1extprod=0
wr2jsonwatt='.watt'
wr2jsonkwh='.kwh'
wr2jsonurl='http://192.168.0.12/solar_api'
bezug_id=30
usevartamodbus=0
froniusvar2=1
soc2pin=pin
pv2kitversion=0
chargep1cp=1
chargep2cp=1
chargep3cp=1
chargep4cp=1
chargep5cp=1
chargep6cp=1
chargep7cp=1
chargep8cp=1
soclp2_vin=none
rfidlist=0
wizzarddone=110
preisjekwh=0.3
displaylp3max=22000
displaylp4max=22000
displaylp5max=22000
displaylp6max=22000
displaylp7max=22000
displaylp8max=22000
mypeugeot_userlp1=User
mypeugeot_passlp1='Pass'
mypeugeot_clientidlp1=ID
mypeugeot_clientsecretlp1=Secret
mypeugeot_userlp2=User
mypeugeot_passlp2='Pass'
mypeugeot_clientidlp2=ID
mypeugeot_clientsecretlp2=Secret
myopel_userlp1=User
myopel_passlp1='Pass'
myopel_clientidlp1=ID
myopel_clientsecretlp1=Secret
myopel_userlp2=User
myopel_passlp2='Pass'
myopel_clientidlp2=ID
myopel_clientsecretlp2=Secret
ssdisplay=0
soc2vin=
soc2intervall=60
wirkungsgradlp1=90
soc_id_username=stefan@xxxxxxxxxxxxxxxxxx
soc_id_passwort='xxxxxxxxxxxxxxxxxxxx'
soc_id_vin=WVXXXXXXXXXXXXXXXXX
soc_eq_client_id_lp1=ID
soc_eq_client_secret_lp1=Secret
soc_eq_vin_lp1=VIN
soc_eq_cb_lp1='http://openWB/openWB/modules/soc_eq/cb1.php'
soc_eq_client_id_lp2=ID
soc_eq_client_secret_lp2=Secret
soc_eq_vin_lp2=VIN
soc_eq_cb_lp2='http://openWB/openWB/modules/soc_eq/cb2.php'
solaxip=192.168.1.1
battjsonurl='192.168.0.10/speicher'
battjsonsoc='.RSOC'
battjsonwatt='.Consumption_W'
etprovideraktiv=0
tibbertoken=d1007ead2dc84a2b82f0de19451c5fb22112f7ae11d19bf2bedb224a003ff74a
tibberhomeid=c70dcbe5-4485-4821-933d-a8a86452737b
psa_userlp1=User
psa_passlp1='Pass'
psa_clientidlp1=ID
psa_clientsecretlp1=Secret
psa_userlp2=User
psa_passlp2='Pass'
psa_clientidlp2=ID
psa_clientsecretlp2=Secret
mypeugeot_soccalclp1=0
mypeugeot_soccalclp2=0
myopel_soccalclp1=0
myopel_soccalclp2=0
psa_soccalclp1=0
psa_soccalclp2=0
u1p3schaltparam=8
soc_tesla_mfapasscode=XXX
soc_teslalp2_mfapasscode=XXX
speicherpwloginneeded=0
speicherpwuser=Username
speicherpwpass='XXX'
multifems=1
soc_vag_type=vw
soc_vag_username=user
soc_vag_password='pass'
soc_vag_intervall=60
soc2type=vw
soc_vag_intervallladen=10
soc2intervallladen=10
solaredgezweiterspeicher=0
solaredgemodbusport=502
wr2_piko2_user='user'
wr2_piko2_pass=''
wr2_piko2_url='https://url'
soc_vag_vin='WVWZZZ...'
soc_http_intervall=60
soc_http_intervallladen=10
kostalplenticoreip3=none
abgesteckthooklp1_url='https://webhook.com/aus.php'
ladestarthooklp1_url='https://webhook.com/ein.php'
ladestophooklp1_url='https://webhook.com/aus.php'
abgesteckthooklp1=0
ladestarthooklp1=0
ladestophooklp1=0
u1p3ppause=2
speicher1_ip2=192.168.0.17
etprovider=et_awattar
cpunterbrechungdauerlp1=4
cpunterbrechungdauerlp2=4
powerfoxuser=name@mail.de
powerfoxpass=''
powerfoxid=idesmeters
wryoulessalt=0
soc_audi_vin=VIN
standardSocketInstalled=0
sdm120modbussocketsource=/dev/ttyUSB0
sdm120modbussocketid=9
kia_soccalclp1=0
kia_soccalclp2=0
psa_intervallp1=10
psa_intervallp2=10
psa_manufacturerlp1=Peugeot
psa_manufacturerlp2=Peugeot
wirkungsgradlp2=90
hook3einschaltverz=20
solaredgesubbat=0
studer_ip=192.168.1.1
studer_xt=1
studer_vc=1
studer_vc_type=VS
pingcheckactive=0
froniusmeterlocation=0
soc_tronity_client_id_lp1=''
soc_tronity_client_secret_lp1=''
soc_tronity_vehicle_id_lp1=''
soc_tronity_intervall=720
soc_tronity_intervallladen=15
soc_tronity_client_id_lp2=''
soc_tronity_client_secret_lp2=''
soc_tronity_vehicle_id_lp2=''
soc_evcc_type_lp1=vw
soc_evcc_username_lp1=''
soc_evcc_password_lp1=''
soc_evcc_vin_lp1=''
soc_evcc_token_lp1=''
soc_evcc_intervall=720
soc_evcc_intervallladen=15
soc_evcc_type_lp2=vw
soc_evcc_username_lp2=''
soc_evcc_password_lp2=''
soc_evcc_vin_lp2=''
soc_evcc_token_lp2=''
wrfroniusisgen24=0
cpunterbrechungmindestlaufzeitaktiv=0
cpunterbrechungmindestlaufzeit=30
solarwattmethod=0
sungrowsr=0
alphav123=0
twcmanagerlp1httpcontrol=0
twcmanagerlp1port=8080
twcmanagerlp2ip='127.0.0.1'
twcmanagerlp2port=8080
twcmanagerlp2phasen=3
twcmanagerlp2httpcontrol=0
bezug2_solarlog_ip=192.168.0.12
bezug2_solarlog_speicherv=0
soc_id_intervallladen=20
soc_id_intervall=120
name_wechselrichter3=WR3
vartaspeicher2ip=none
victron_energy_meter=1
solarview_timeout=1
solarview_command_wr=00*
powerfoxpvid=idesmeters
pv2ip2=192.168.192.192
pv2id2=0
kia_abrp_enable=0
kia_abrp_token=''
kia_abrp_enable_2=0
kia_abrp_token_2=''
kia_advanced=0
kia_advanced2=0
kia_adv_cachevalid=10
kia_adv_cachevalid2=10
kia_adv_12v=20
kia_adv_12v2=20
kia_adv_interval_unplug=360
kia_adv_interval_unplug2=360
kia_adv_ratelimit=15
kia_adv_ratelimit2=15
owbpro1ip=192.168.1.100
owbpro2ip=192.168.1.100
owbpro3ip=192.168.1.100
owbpro4ip=192.168.1.100
owbpro5ip=192.168.1.100
owbpro6ip=192.168.1.100
owbpro7ip=192.168.1.100
owbpro8ip=192.168.1.100
alphasource=0
alphaip=192.168.193.15
good_we_ip=192.168.1.1
good_we_id=247
batterx_ip=192.168.0.17
virtual_ip_eth0='192.168.193.5'
virtual_ip_wlan0='192.168.193.6'
evuflexversion=2
evuflexip='192.168.193.5'
evuflexport=8899
evuflexid=1
pvflexip='192.168.193.5'
pvflexport=8899
pvflexid=1
pvflexversion=1
pv2flexip='192.168.193.5'
pv2flexport=8899
pv2flexid=1
pv2flexversion=1
soc_aiways_user=''
soc_aiways_pass=''
soc_aiways_vin=''
soc_aiways_intervall=''
soc_aiwayslp2_user=''
soc_aiwayslp2_pass=''
soc_aiwayslp2_vin=''
soc_aiwayslp2_intervall=''
wrsmaversion=0
wr2smaversion=0

Was könnte dir noch weiterhelfen?

Gruß

Stefan

Stefan · Beitrag von **Stefan** » Di Aug 15, 2023 7:15 am

Hallo Aiole,

vielen Dank für deine Unterstützung!

aiole hat geschrieben: ↑Fr Aug 11, 2023 10:52 am Klingt sehr speziell. Duo mit LP1-Buchse und LP2-normal? Gab's das offiziell?
Die oWB-Buchse kenne ich nur als EIN LP.

Ich hatte mir die openWB in Einzelteilen im Shop gekauft, als der Selbstbau der WB in der Community noch üblicher war. Ich wollte alles in einem Verteilerschrank in der Garage integrieren und habe die Buchse an der Garagenaussenseite angebracht und das angeschlagene Kabel innen.

Ich hatte Spass die openWB selbst aufzubauen und ein befreundeter Elektriker hat Sie mir dann angeschlossen. Ich habe versucht mit meinen Modifikationen so nah am Standard wie möglich zu bleiben:

Den EVSE für den zweiten Ladepunkt habe ich mir mit ID 2 flashen lassen.

Die SDM630 IDs habe ich mit 105 und 106 konfiguriert, so dass dies dem Duo-Standard entsprechen sollte.

Angeschlossen sind alle Modbusgeräte an einem Bus über einen Modbus-USB-Adapter.

Den Verriegelungsaktor habe ich später mit der AddOn-Platine nachgerüstet.

Ein Screenshot der Konfiguration und die Config-Datei habe ich eben in der Antwort auf den Post von LutzB gepostet. Ich hatte gehofft, dass ich die Hardware auch in Software 2.0 so konfigurieren kann.

aiole hat geschrieben: ↑Fr Aug 11, 2023 10:52 am Ich hätte 2 Ideen:
1. wie aktuell: LP1-Buchse als normale oWB ohne Verriegelung betreiben. -> klassische Duo (als primary)
2. LP1 als Buchse/primary und für LP2 einen 2. RPi als secondary. Diesen dann als "externe oWB" in den primary einbinden.

Auf die Verriegelung möchte ich ungern verzichten, da die Buchse frei zugänglich ist.

Ich bin mir nicht sicher, ob die den zweiten Vorschlag richtig verstanden habe: Deine Idee wäre quasi eine zweite openWB in dem Gehäuse unterzubringen, richtig? Platz wäre vorhanden. Du schlägst vor, einen zweiten RPi einbauen, den auch mit einem USB-Modbus-Adapter auszustatten und den zweiten EVSE und SDM630 an den Modbus des zweiten RPi anzuschließen. Dazu müsste ich den EVSE wieder auf ID 1 flashen lassen. Oder habe ich das falsch verstanden?

Gruß

Stefan

LutzB · Beitrag von **LutzB** » Di Aug 15, 2023 7:50 am

Das Log des internen Ladepunktes würde weiterhelfen. Am Besten nach einem Reboot nachsehen, da dann auch die erkannten Zähler und EVSEs aufgeführt werden.

aiole · Beitrag von **aiole** » Di Aug 15, 2023 7:32 pm

Stefan hat geschrieben: ↑Di Aug 15, 2023 7:15 am Deine Idee wäre quasi eine zweite openWB in dem Gehäuse unterzubringen, richtig? Platz wäre vorhanden. Du schlägst vor, einen zweiten RPi einbauen, den auch mit einem USB-Modbus-Adapter auszustatten und den zweiten EVSE und SDM630 an den Modbus des zweiten RPi anzuschließen. Dazu müsste ich den EVSE wieder auf ID 1 flashen lassen. Oder habe ich das falsch verstanden?

Ja, damit die 2. oWB zu einer normalen Einzel-WB mutiert.
Das Problem ist, dass man die später tausendfach genutzte sw2 ungern für "DIY-Sonderlocken" auslegt. Mit dem 2. Vorschlag wärest Du wieder voll im Standard. Hier gibt es noch Hinweise zu den sw2-Ladepunkten inkl. zusätzlicher Skizzen. https://www.youtube.com/watch?v=Jw3Eh_aqSwk

Stefan · Beitrag von **Stefan** » Do Aug 17, 2023 6:15 am

LutzB hat geschrieben: ↑Di Aug 15, 2023 7:50 am Das Log des internen Ladepunktes würde weiterhelfen. Am Besten nach einem Reboot nachsehen, da dann auch die erkannten Zähler und EVSEs aufgeführt werden.

Sorry, dass es etwas gedauert hat. Ich musste erst nochmals die SD-Karte wechseln, da ich im Moment noch die 1.9 produktiv verwende. Die zwei EVSE und die zwei Zähler werden erkannt, aber es gibt einen Fehler "LP1 gleiches Device wie LP0". Sie selbst:

Code: Alles auswählen

2023-08-17 07:56:29,752 - {modules.internal_chargepoint_handler.clients:134} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-08-17 07:56:29,904 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:29,906 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-08-17 07:56:30,972 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-08-17 07:56:31,174 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:31,382 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:31,392 - {modules.internal_chargepoint_handler.clients:139} - {ERROR:Internal Chargepoint} - LP1 gleiches Device wie LP0
2023-08-17 07:56:31,547 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:56:31,549 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP1: 2
2023-08-17 07:56:32,620 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 106
2023-08-17 07:56:32,771 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:56:32,964 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:56:35,003 - {modules.internal_chargepoint_handler.clients:134} - {ERROR:Internal Chargepoint} - LP0 Device: /dev/ttyUSB0
2023-08-17 07:56:35,157 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:35,159 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP0: 1
2023-08-17 07:56:36,215 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 105
2023-08-17 07:56:36,400 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:36,590 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:56:36,606 - {modules.internal_chargepoint_handler.clients:139} - {ERROR:Internal Chargepoint} - LP1 gleiches Device wie LP0
2023-08-17 07:56:36,759 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:56:36,761 - {modules.internal_chargepoint_handler.clients:49} - {ERROR:Internal Chargepoint} - Modbus-ID der EVSE an LP1: 2
2023-08-17 07:56:37,818 - {modules.internal_chargepoint_handler.clients:63} - {ERROR:Internal Chargepoint} - Verbauter Zähler: <class 'modules.common.sdm.Sdm630'> mit Modbus-ID: 106
2023-08-17 07:56:37,972 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:56:38,195 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 15
2023-08-17 07:57:46,027 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:57:46,081 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 07:59:01,342 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:59:01,385 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 07:59:42,401 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 07:59:42,443 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 08:00:59,955 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 08:01:00,000 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 08:02:17,502 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 08:02:17,548 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 08:02:52,888 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 08:02:52,935 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] Modbus Error: [Invalid Message] No response received, expected at least 2 bytes (0 received)\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

2023-08-17 08:03:10,366 - {modules.common.evse:57} - {DEBUG:Internal Chargepoint} - FW-Version: 12
2023-08-17 08:03:10,409 - {modules.common.fault_state:52} - {ERROR:Internal Chargepoint} - Ladepunkt 0: FaultState FaultStateLevel.ERROR, FaultStr modules.internal_chargepoint_handler.chargepoint_module <class 'modules.common.fault_state.FaultState'> ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>), Traceback: 
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 85, in __read_registers
    raise FaultState.error(__name__+" "+str(response))
modules.common.fault_state.FaultState: ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 62, in get_values
    plug_state, charge_state, self.set_current_evse = self.__client.evse_client.get_plug_charge_state()
  File "/var/www/html/openWB/packages/modules/common/evse.py", line 39, in get_plug_charge_state
    set_current, _, state_number = self.client.read_holding_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 118, in read_holding_registers
    return self.__read_registers(
  File "/var/www/html/openWB/packages/modules/common/modbus.py", line 100, in __read_registers
    raise FaultState.error(__name__+" "+str(type(e))+" " +
modules.common.fault_state.FaultState: ("modules.common.modbus <class 'modules.common.fault_state.FaultState'> ('modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/internal_chargepoint_handler.py", line 222, in update
    state = self.module.get_values(phase_switch_cp_active, rfid_data.last_tag)[0]
  File "/var/www/html/openWB/packages/modules/internal_chargepoint_handler/chargepoint_module.py", line 103, in get_values
    raise FaultState.error(__name__ + " " + str(type(e)) + " " + str(e)) from e
modules.common.fault_state.FaultState: ('modules.internal_chargepoint_handler.chargepoint_module <class \'modules.common.fault_state.FaultState\'> ("modules.common.modbus <class \'modules.common.fault_state.FaultState\'> (\'modules.common.modbus Modbus Error: [Input/Output] No Response received from the remote unit/Unable to decode response\', <FaultStateLevel.ERROR: 2>)", <FaultStateLevel.ERROR: 2>)', <FaultStateLevel.ERROR: 2>)

Gruß

Stefan

openWB Forum

Konfigurationsprobleme nach Update auf Software 2.0

Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0

Re: Konfigurationsprobleme nach Update auf Software 2.0