Rückmeldungen openWB software 2.1.6 Alpha 1

Fragen zur Nutzung, Features, usw..
Gesperrt
LenaK
Beiträge: 1310
Registriert: Fr Jan 22, 2021 6:40 am
Been thanked: 16 times

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von LenaK »

Jens hat geschrieben: ↑Di Okt 08, 2024 2:27 pm Installierte Version: 2024-10-08 15:16:06 +0200 [b01c6e34c]

Habe Zielladen 100% bis morgen 5:59 Uhr eingestellt-
Derzeit wird -trotz- erhötem Preis geladen.

Warum ?

Main Log:
https://paste.openwb.de/3GqX50KCkeFmH8K


Warum laden.jpg
Du musst im Ladeprofil aktivieren, dass strompreisbasiert geladen werden soll.
Nach oben
LenaK
Beiträge: 1310
Registriert: Fr Jan 22, 2021 6:40 am
Been thanked: 16 times

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von LenaK »

thesorrow101 hat geschrieben: ↑Mi Okt 09, 2024 12:48 pm
mrinas hat geschrieben: ↑Mi Okt 09, 2024 12:07 pm meist reicht ein Durchlauf zwischen zwei *** start *** Meldungen aus dem main log. Loglevel auf Details.
Müsste hier passiert sein und ersichtlich. Danke dir schon mal! Ich musste hinten raus wegen der Zeichenlimitierung kürzen

Code: Alles auswählen

2024-10-09 14:40:40,889 - {root:76} - {INFO:MainThread} - # ***Start*** 
2024-10-09 14:40:40,926 - {modules.devices.siemens.siemens.device:56} - {DEBUG:device2} - Start device reading{'component0': <modules.devices.siemens.siemens.counter.SiemensCounter object at 0x6f1bf1d8>, 'component1': <modules.devices.siemens.siemens.bat.SiemensBat object at 0x703938f8>}
2024-10-09 14:40:40,927 - {modules.common.component_context:26} - {DEBUG:device2} - Update Komponente ['Siemens Zähler']
2024-10-09 14:40:40,930 - {modules.common.component_context:58} - {DEBUG:device3} - Update Komponenten ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:40,931 - {modules.common.component_context:58} - {DEBUG:device4} - Update Komponenten ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:40,932 - {modules.common.component_context:26} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:40,957 - {modules.common.component_context:26} - {DEBUG:device4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:40,959 - {modules.common.simcount._simcount:42} - {DEBUG:device2} - Previous state: SimCounterState(timestamp=1728477630.552929, power=-918, imported=257687.1790548634, exported=2993975.5173604214)
2024-10-09 14:40:40,965 - {modules.common.simcount._calculate:11} - {DEBUG:device2} - time passed: 0.00289063, power1: -918, power2: -1114
2024-10-09 14:40:40,966 - {modules.common.simcount._calculate:27} - {DEBUG:device2} - power did not change sign. Total energy: -2.93688
2024-10-09 14:40:40,967 - {modules.common.component_context:26} - {DEBUG:device3} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:40,968 - {modules.common.simcount._simcount:65} - {DEBUG:device2} - imported: 0 Wh, exported: 2.93688 Wh, new state: SimCounterState(timestamp=1728477640.9591932, power=-1114, imported=257687.1790548634, exported=2993978.454239459)
2024-10-09 14:40:40,979 - {modules.common.store._api:26} - {DEBUG:device2} - Raw data CounterState(currents=[0.0, 0.0, 0.0], powers=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], imported=257687.1790548634, exported=2993978.454239459, power=-1114, frequency=50)
2024-10-09 14:40:40,988 - {modules.common.component_context:26} - {DEBUG:device2} - Update Komponente ['Siemens Speicher']
2024-10-09 14:40:41,070 - {modules.devices.sma.sma_sunny_boy.inverter:75} - {DEBUG:device4} - WR 192.168.178.57: InverterState(currents=[0.0, 0.0, 0.0], power=-6125, exported=50046695, dc_power=-6245)
2024-10-09 14:40:41,074 - {modules.common.store._api:26} - {DEBUG:device4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-6125, exported=50046695, dc_power=-6245)
2024-10-09 14:40:41,075 - {modules.common.simcount._simcount:42} - {DEBUG:device2} - Previous state: SimCounterState(timestamp=1728477630.667938, power=1129, imported=60526736.36808882, exported=21132538022.18182)
2024-10-09 14:40:41,078 - {modules.devices.sma.sma_sunny_boy.inverter:75} - {DEBUG:device3} - WR 192.168.178.180: InverterState(currents=[0.0, 0.0, 0.0], power=-3101, exported=21128607, dc_power=-3139)
2024-10-09 14:40:41,081 - {modules.common.store._api:26} - {DEBUG:device3} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-3101, exported=21128607, dc_power=-3139)
2024-10-09 14:40:41,080 - {modules.common.simcount._calculate:11} - {DEBUG:device2} - time passed: 0.00289102, power1: 1129, power2: 1128
2024-10-09 14:40:41,087 - {modules.common.simcount._calculate:27} - {DEBUG:device2} - power did not change sign. Total energy: 3.26251
2024-10-09 14:40:41,092 - {modules.common.simcount._simcount:65} - {DEBUG:device2} - imported: 3.26251 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1728477641.0755966, power=1128, imported=60526739.63060068, exported=21132538022.18182)
2024-10-09 14:40:41,107 - {modules.common.store._api:26} - {DEBUG:device2} - Raw data BatState(imported=60526739.63060068, exported=21132538022.18182, power=1128, soc=93)
2024-10-09 14:40:41,121 - {modules.common.component_context:26} - {DEBUG:component1} - Update Komponente ['Siemens Speicher']
2024-10-09 14:40:41,130 - {modules.common.component_context:26} - {DEBUG:component4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:41,140 - {modules.common.store._api:26} - {DEBUG:component4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-3101, exported=21128607, dc_power=None)
2024-10-09 14:40:41,137 - {modules.common.component_context:26} - {DEBUG:component5} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:41,132 - {modules.common.store._api:31} - {INFO:component1} - Saving BatState(imported=60526739.63060068, exported=21132538022.18182, power=1128, soc=93)
2024-10-09 14:40:41,142 - {modules.common.store._api:31} - {INFO:component4} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-3101, exported=21128607, dc_power=None)
2024-10-09 14:40:41,143 - {modules.common.component_context:26} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:41,149 - {modules.common.store._api:26} - {DEBUG:component5} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-6125, exported=50046695, dc_power=None)
2024-10-09 14:40:41,173 - {modules.common.store._api:31} - {INFO:component5} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-6125, exported=50046695, dc_power=None)
2024-10-09 14:40:41,222 - {modules.common.component_context:26} - {DEBUG:component0} - Update Komponente ['Siemens Zähler']
2024-10-09 14:40:41,223 - {modules.common.store._api:31} - {INFO:component0} - Saving CounterState(currents=[0.0, 0.0, 0.0], powers=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], imported=257687.1790548634, exported=2993978.454239459, power=-1114, frequency=50)
2024-10-09 14:40:41,402 - {control.bat_all:253} - {DEBUG:MainThread} - Damit der Speicher hochregeln kann, muss unabhängig vom eingestellten Regelmodus Einspeisung erzeugt werden.
2024-10-09 14:40:41,403 - {control.bat_all:184} - {INFO:MainThread} - -100W verbleibende Speicher-Leistung
2024-10-09 14:40:41,406 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 0: [63.739999999999995, 35.13, 34.86]A
2024-10-09 14:40:41,417 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 0: 31531.08W
2024-10-09 14:40:41,422 - {control.chargepoint.chargepoint:540} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3
2024-10-09 14:40:41,425 - {control.chargepoint.chargepoint:523} - {DEBUG:MainThread} - Phasenzahl Lademodus: 1
2024-10-09 14:40:41,432 - {control.chargepoint.chargepoint:698} - {INFO:MainThread} - LP 6, EV: Zoe (EV-Nr.2): Theoretisch benötigter Strom 9A, Lademodus pv_charging, Submodus: Chargemode.PV_CHARGING, Phasen: 1, Priorität: False, max. Ist-Strom: 28.74
2024-10-09 14:40:41,437 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1728477631.1760771, power=306.5799999999999, imported=21276558715.40588, exported=56761281.245768055)
2024-10-09 14:40:41,438 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00285033, power1: 306.58, power2: 507.92
2024-10-09 14:40:41,439 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 1.1608
2024-10-09 14:40:41,439 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 1.1608 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1728477641.437256, power=507.9200000000001, imported=21276558716.566677, exported=56761281.245768055)
2024-10-09 14:40:41,441 - {control.data:266} - {INFO:MainThread} - bat1
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=93, daily_exported=1368.0, daily_imported=10713.0, imported=60526739.63, exported=21132538022.18, fault_state=0, fault_str='Kein Fehler.', power=1128))
2024-10-09 14:40:41,443 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=93, daily_exported=1368.0, daily_imported=10713.0, fault_str='Kein Fehler.', fault_state=0, imported=60526739.63, exported=21132538022.18, power=1128), set=Set(charging_power_left=-100, regulate_up=True))
2024-10-09 14:40:41,451 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=11612.0, daily_exported=0.0, power=6417.08, imported=5793771.0, exported=0))
2024-10-09 14:40:41,455 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode=<Chargemode.PV_CHARGING: 'pv_charging'>, current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=', da die maximale Leistung an Zähler {} erreicht ist.', min_current=9, phases=1, prio=False, required_current=9, required_currents=[9, 0.0, 0.0], state=4, submode=<Chargemode.PV_CHARGING: 'pv_charging'>, timestamp_auto_phase_switch=None, timestamp_charge_start=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=True, charging_current=0, charging_power=0, charging_voltage=0, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=42.0), currents=[28.74, 0.13, -0.14], daily_imported=11612.0, daily_exported=0.0, error_timestamp=None, evse_current=31, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5793771.0, phases_in_use=1, plug_state=True, power=6417.08, rfid_timestamp=None, rfid=None, serial_number='20202995', soc=None, soc_timestamp=None, state_str=None, vehicle_id=None, voltages=[224.01, 234.2, 230.91]), set=Set(charging_ev=2, charging_ev_prev=2, current=31.76, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='pv_charging', costs=0, imported_at_mode_switch=5792566.89, imported_at_plugtime=5785844.73, imported_since_mode_switch=1189.9500000001863, imported_since_plugged=7912.109999999404, range_charged=6.999705882354037, time_charged='0:15', timestamp_start_charging=1728476680.96662, ev=2, prio=False, rfid=None, serial_number=None, soc_at_start=39.0, soc_at_end=None, range_at_start=113.0, range_at_end=None), manual_lock=False, phases_to_use=1, plug_state_prev=True, plug_time=1728470621.179613, required_power=2070.0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x6c082268>), config=Config(configuration={'mode': 'series', 'ip_address': 'localhost', 'duo_num': 0}, ev=2, name='Interne openWB', type='internal_openwb', template=0, connected_phases=3, phase_1=1, auto_phase_switch_hw=True, control_pilot_interruption_hw=True, id=6))
2024-10-09 14:40:41,457 - {control.data:266} - {INFO:MainThread} - cpt0
CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), charging_type='AC', id=0, max_current_multi_phases=32, max_current_single_phase=32, dc_max_current=435, name='Standard Ladepunkt-Profil', disable_after_unplug=False, valid_tags=[])
2024-10-09 14:40:41,463 - {control.data:266} - {INFO:MainThread} - counter0
CounterData(config=Config(max_currents=[35, 35, 35], max_total_power=24000), get=Get(powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], frequency=50, daily_exported=5298.0, daily_imported=1841.0, imported=257687.1790548634, exported=2993978.454239459, fault_state=0, fault_str='Kein Fehler.', power=-1114), set=Set(error_counter=0, reserved_surplus=0, released_surplus=0, raw_power_left=31531.08, raw_currents_left=[63.739999999999995, 35.13, 34.86], surplus_power_left=0))
2024-10-09 14:40:41,464 - {control.data:241} - {INFO:MainThread} - counter_all_data
CounterAllData(config=Config(home_consumption_source_id=None, consider_less_charging=False), get=Get(hierarchy=[{'id': 0, 'type': 'counter', 'children': [{'id': 1, 'type': 'bat', 'children': []}, {'id': 4, 'type': 'inverter', 'children': []}, {'id': 5, 'type': 'inverter', 'children': []}, {'id': 6, 'type': 'cp', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=507.9200000000001, smarthome_power_excluded_from_home_consumption=59, invalid_home_consumption=0, daily_yield_home_consumption=6311.0, imported_home_consumption=21276558716.566677, disengageable_smarthome_power=0))
2024-10-09 14:40:41,465 - {control.data:266} - {INFO:MainThread} - ct0
ChargeTemplateData(name='Standard-Lade-Profil', prio=False, load_default=False, et=Et(active=False, max_price=0.0002), time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(dc_min_current=145, dc_min_soc_current=145, min_soc_current=9, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, dc_current=145, limit=Limit(selected='soc', amount=1000, soc=50))))
2024-10-09 14:40:41,466 - {control.data:266} - {INFO:MainThread} - ev0
EvData(set=Set(soc_error_counter=2429), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp=1728474442.654738, force_soc_update=False, range=0, fault_state=2, fault_str='HTTP 503: Server-Fehler. Versuche es später erneut.'))
2024-10-09 14:40:41,467 - {control.data:266} - {INFO:MainThread} - ev2
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Zoe', tag_id=[], get=Get(soc=42.0, soc_timestamp=1728477596.931842, force_soc_update=False, range=124.0, fault_state=0, fault_str='Kein Fehler.'))
2024-10-09 14:40:41,468 - {control.data:266} - {INFO:MainThread} - et0
EvTemplateData(dc_min_current=0, dc_max_current=0, name='Standard-Fahrzeug-Profil', max_current_multi_phases=32, max_phases=3, phase_switch_pause=10, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=True, control_pilot_interruption_duration=5, average_consump=17000, min_current=9, max_current_single_phase=32, battery_capacity=40000, efficiency=90, nominal_difference=4, keep_charge_active_duration=40)
2024-10-09 14:40:41,471 - {control.data:245} - {INFO:MainThread} - general_data
GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=3), phase_switch_delay=6, pv_charging=PvCharging(bat_power_reserve=200, bat_power_reserve_active=True, control_range=[-230, 0], feed_in_yield=0, phase_switch_delay=7, phases_to_use=0, bat_power_discharge=1000, bat_power_discharge_active=True, min_bat_soc=64, bat_mode='bat_mode', switch_off_delay=120, switch_off_threshold=100, switch_on_delay=30, switch_on_threshold=1400), retry_failed_phase_switches=True, scheduled_charging=ScheduledCharging(phases_to_use=0, phases_to_use_pv=0), time_charging=TimeCharging(phases_to_use=3), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='primary', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp=None, http_api=False, mqtt_bridge=False, prices=Prices(bat=0.0002, cp=0, grid=0.0003, pv=0.00015), range_unit='km', ripple_control_receiver=RippleControlReceiver(get=RippleControlReceiverGet(fault_state=0, fault_str='Kein Fehler.', override_value=100), module=None, override_reference=<OverrideReference.CHARGEPOINT: 'chargepoint'>))
2024-10-09 14:40:41,473 - {control.data:246} - {INFO:MainThread} - general_data-display
primary
2024-10-09 14:40:41,474 - {control.data:247} - {INFO:MainThread} - graph_data
GraphData(config=Config(duration=120))
2024-10-09 14:40:41,475 - {control.data:248} - {INFO:MainThread} - optional_data
OptionalData(et=Et(get=EtGet(fault_state=0, fault_str='Kein Fehler.', prices={})), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=60, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x6c0867c0>), led=Led(active=False), rfid=Rfid(active=False), dc_charging=False)
2024-10-09 14:40:41,477 - {control.data:266} - {INFO:MainThread} - pv4
PvData(config=Config(max_ac_out=0), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=15963.0, monthly_exported=89431, yearly_exported=2575385, exported=21128607, fault_state=0, fault_str='Kein Fehler.', power=-3101))
2024-10-09 14:40:41,483 - {control.data:266} - {INFO:MainThread} - pv5
PvData(config=Config(max_ac_out=0), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=26244.0, monthly_exported=144805, yearly_exported=3707661, exported=50046695, fault_state=0, fault_str='Kein Fehler.', power=-6125))
2024-10-09 14:40:41,484 - {control.data:250} - {INFO:MainThread} - pv_all_data
PvAllData(config=Config(configured=True), get=Get(daily_exported=42207.0, fault_str='Kein Fehler.', fault_state=0, monthly_exported=234236, yearly_exported=6283046, exported=71175302, power=-9226))
2024-10-09 14:40:41,485 - {control.data:266} - {INFO:MainThread} - system
{'update_in_progress': False, 'perform_update': False, 'backup_cloud': {'backup_before_update': True}, 'ip_address': '192.168.178.114', 'current_commit': '2024-10-02 07:56:51 +0200 [b804bed00]', 'current_branch': 'master', 'current_branch_commit': '2024-10-02 07:56:51 +0200 [b804bed00]', 'current_missing_commits': [], 'dataprotection_acknowledged': True, 'datastore_version': 61, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.6-Alpha.1', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1728477631, 'time': '14:40:31', 'grid': -0.918, 'house-power': 0.307, 'charging-all': 6.103, 'pv-all': 8.515, 'cp6-power': 6.103, 'ev0-soc': 0, 'ev2-soc': 42.0, 'bat-all-power': 1.129, 'bat-all-soc': 93}, 'installAssistantDone': True, 'serial_number': None, 'module_update_completed': True}
2024-10-09 14:40:41,486 - {control.data:279} - {INFO:MainThread} - device2
{'name': 'Siemens', 'type': 'siemens', 'vendor': 'siemens', 'id': 2, 'configuration': {'modbus_id': 1, 'ip_address': '192.168.178.88', 'port': 502}}
2024-10-09 14:40:41,487 - {control.data:281} - {INFO:MainThread} - component0
{'name': 'Siemens Zähler', 'info': {'manufacturer': None, 'model': None}, 'type': 'counter', 'id': 0, 'configuration': {}}
2024-10-09 14:40:41,488 - {control.data:281} - {INFO:MainThread} - component1
{'name': 'Siemens Speicher', 'info': {'manufacturer': None, 'model': None}, 'type': 'bat', 'id': 1, 'configuration': {}}
2024-10-09 14:40:41,496 - {control.data:279} - {INFO:MainThread} - device3
{'name': 'SMA Sunny Boy/Tripower', 'type': 'sma_sunny_boy', 'vendor': 'sma', 'id': 3, 'configuration': {'ip_address': '192.168.178.180', 'port': 502}}
2024-10-09 14:40:41,502 - {control.data:281} - {INFO:MainThread} - component4
{'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'info': {'manufacturer': None, 'model': None}, 'type': 'inverter', 'id': 4, 'configuration': {'hybrid': False, 'version': 0, 'modbus_id': 3}}
2024-10-09 14:40:41,505 - {control.data:279} - {INFO:MainThread} - device4
{'name': 'SMA Sunny Boy/Tripower', 'type': 'sma_sunny_boy', 'vendor': 'sma', 'id': 4, 'configuration': {'ip_address': '192.168.178.57', 'port': 502}}
2024-10-09 14:40:41,506 - {control.data:281} - {INFO:MainThread} - component5
{'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'info': {'manufacturer': None, 'model': None}, 'type': 'inverter', 'id': 5, 'configuration': {'hybrid': False, 'version': 0, 'modbus_id': 3}}
2024-10-09 14:40:41,508 - {control.data:253} - {INFO:MainThread} - 

2024-10-09 14:40:41,510 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus
2024-10-09 14:40:41,514 - {control.algorithm.algorithm:63} - {DEBUG:MainThread} - Ladepunkt 6: Prüfen, ob Phasenumschaltung durchgeführt werden soll.
2024-10-09 14:40:41,521 - {control.chargepoint.chargepoint:540} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3
2024-10-09 14:40:41,536 - {control.ev:499} - {DEBUG:MainThread} - Genutzter Strom: 28.74A, Überschuss: 1014W, benötigte neue Leistung: -1150W
2024-10-09 14:40:41,546 - {control.ev:546} - {INFO:MainThread} - LP 6: Umschaltung von 1 auf 3 Phasen in 5 Min. 59 Sek..
2024-10-09 14:40:41,547 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen**
2024-10-09 14:40:41,551 - {control.algorithm.min_current:20} - {INFO:MainThread} - Mode-Tuple Chargemode.PV_CHARGING - Chargemode.PV_CHARGING - False, Zähler 0
2024-10-09 14:40:41,553 - {control.counter:179} - {DEBUG:MainThread} - Zähler 0: [54.739999999999995, 35.13, 34.86]A verbleibende Ströme, 29461.08W verbleibende Leistung
2024-10-09 14:40:41,554 - {control.algorithm.common:99} - {INFO:MainThread} - LP6: Stromstärke 9A
2024-10-09 14:40:41,556 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Soll-Strom setzen**
2024-10-09 14:40:41,559 - {control.counter:500} - {DEBUG:MainThread} - Zähler 0: Begrenzung der verbleibenden Leistung auf 5361.080000000002W
2024-10-09 14:40:41,561 - {control.algorithm.algorithm:38} - {INFO:MainThread} - **PV-geführten Strom setzen**
2024-10-09 14:40:41,564 - {control.algorithm.filter_chargepoints:102} - {DEBUG:MainThread} - Geordnete Ladepunkte [6]
2024-10-09 14:40:41,566 - {control.algorithm.surplus_controlled:45} - {INFO:MainThread} - Mode-Tuple Chargemode.PV_CHARGING - Chargemode.PV_CHARGING - False, Zähler 0
2024-10-09 14:40:41,567 - {control.counter:186} - {DEBUG:MainThread} - Zähler 0: [31.739999999999995, 35.13, 34.86]A verbleibende Ströme, 71.08000000000175W verbleibender Überschuss
2024-10-09 14:40:41,567 - {control.algorithm.common:99} - {INFO:MainThread} - LP6: Stromstärke 32A
2024-10-09 14:40:41,568 - {control.process:24} - {INFO:MainThread} - # Ladung starten.
2024-10-09 14:40:41,571 - {control.process:99} - {INFO:MainThread} - LP6: set current 32 A, state PHASE_SWITCH_DELAY
2024-10-09 14:40:41,584 - {modules.common.component_context:26} - {DEBUG:set current cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:42,232 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/bat/get/imported, Payload 60526739.63, vorherige Payload: 60526736.37
2024-10-09 14:40:42,233 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/bat/get/power, Payload 1128, vorherige Payload: 1129
2024-10-09 14:40:42,234 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/get/power, Payload 6417.08, vorherige Payload: 6103.42
2024-10-09 14:40:42,236 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/get/imported, Payload 5793771.0, vorherige Payload: 5793756.84
2024-10-09 14:40:42,238 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/home_consumption, Payload 507.9200000000001, vorherige Payload: 306.5799999999999
2024-10-09 14:40:42,239 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/imported_home_consumption, Payload 21276558716.566677, vorherige Payload: 21276558715.40588
2024-10-09 14:40:42,242 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/6/control_parameter/limit, Payload None, vorherige Payload: , da die maximale Leistung an Zähler {} erreicht ist.
2024-10-09 14:40:42,244 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/6/control_parameter/state, Payload 1, vorherige Payload: 4
2024-10-09 14:40:42,269 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/6/control_parameter/timestamp_auto_phase_switch, Payload 1728477641.5459, vorherige Payload: None
2024-10-09 14:40:45,283 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-10-09 14:40:45,285 - {helpermodules.utils._thread_handler:40} - {ERROR:MainThread} - Thread smarthome ist bereits aktiv und wird nicht erneut gestartet.
2024-10-09 14:40:49,047 - {modules.update_soc:121} - {DEBUG:SoC} - 3 soc_from_cp: None, timestamp_soc_from_cp: None
2024-10-09 14:40:49,048 - {modules.update_soc:111} - {DEBUG:SoC} - 2 soc_from_cp: None, timestamp_soc_from_cp: None
2024-10-09 14:40:50,298 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-10-09 14:40:50,300 - {helpermodules.utils._thread_handler:40} - {ERROR:MainThread} - Thread smarthome ist bereits aktiv und wird nicht erneut gestartet.
2024-10-09 14:40:50,301 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={})
2024-10-09 14:40:50,302 - {root:76} - {INFO:MainThread} - # ***Start*** 
2024-10-09 14:40:50,358 - {modules.devices.siemens.siemens.device:56} - {DEBUG:device2} - Start device reading{'component0': <modules.devices.siemens.siemens.counter.SiemensCounter object at 0x6f1bf1d8>, 'component1': <modules.devices.siemens.siemens.bat.SiemensBat object at 0x703938f8>}
2024-10-09 14:40:50,364 - {modules.common.component_context:26} - {DEBUG:device2} - Update Komponente ['Siemens Zähler']
2024-10-09 14:40:50,361 - {modules.common.component_context:58} - {DEBUG:device3} - Update Komponenten ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,368 - {modules.common.component_context:58} - {DEBUG:device4} - Update Komponenten ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,372 - {modules.common.component_context:26} - {DEBUG:set values cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:50,372 - {modules.common.component_context:26} - {DEBUG:device3} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,395 - {modules.common.simcount._simcount:42} - {DEBUG:device2} - Previous state: SimCounterState(timestamp=1728477640.9591932, power=-1114, imported=257687.1790548634, exported=2993978.454239459)
2024-10-09 14:40:50,396 - {modules.common.simcount._calculate:11} - {DEBUG:device2} - time passed: 0.00262104, power1: -1114, power2: -676
2024-10-09 14:40:50,397 - {modules.common.simcount._calculate:27} - {DEBUG:device2} - power did not change sign. Total energy: -2.34583
2024-10-09 14:40:50,408 - {modules.common.simcount._simcount:65} - {DEBUG:device2} - imported: 0 Wh, exported: 2.34583 Wh, new state: SimCounterState(timestamp=1728477650.3949196, power=-676, imported=257687.1790548634, exported=2993980.8000658844)
2024-10-09 14:40:50,418 - {modules.common.store._api:26} - {DEBUG:device2} - Raw data CounterState(currents=[0.0, 0.0, 0.0], powers=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], imported=257687.1790548634, exported=2993980.8000658844, power=-676, frequency=50)
2024-10-09 14:40:50,422 - {modules.common.component_context:26} - {DEBUG:device4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,436 - {modules.common.component_context:26} - {DEBUG:device2} - Update Komponente ['Siemens Speicher']
2024-10-09 14:40:50,484 - {modules.common.simcount._simcount:42} - {DEBUG:device2} - Previous state: SimCounterState(timestamp=1728477641.0755966, power=1128, imported=60526739.63060068, exported=21132538022.18182)
2024-10-09 14:40:50,487 - {modules.common.simcount._calculate:11} - {DEBUG:device2} - time passed: 0.0026136, power1: 1128, power2: 1129
2024-10-09 14:40:50,487 - {modules.common.simcount._calculate:27} - {DEBUG:device2} - power did not change sign. Total energy: 2.94944
2024-10-09 14:40:50,488 - {modules.common.simcount._simcount:65} - {DEBUG:device2} - imported: 2.94944 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1728477650.4845448, power=1129, imported=60526742.58004458, exported=21132538022.18182)
2024-10-09 14:40:50,494 - {modules.common.store._api:26} - {DEBUG:device2} - Raw data BatState(imported=60526742.58004458, exported=21132538022.18182, power=1129, soc=93)
2024-10-09 14:40:50,510 - {modules.devices.sma.sma_sunny_boy.inverter:75} - {DEBUG:device3} - WR 192.168.178.180: InverterState(currents=[0.0, 0.0, 0.0], power=-2940, exported=21128615, dc_power=-3026)
2024-10-09 14:40:50,511 - {modules.common.store._api:26} - {DEBUG:device3} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-2940, exported=21128615, dc_power=-3026)
2024-10-09 14:40:50,526 - {modules.devices.sma.sma_sunny_boy.inverter:75} - {DEBUG:device4} - WR 192.168.178.57: InverterState(currents=[0.0, 0.0, 0.0], power=-5837, exported=50046712, dc_power=-6014)
2024-10-09 14:40:50,527 - {modules.common.store._api:26} - {DEBUG:device4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-5837, exported=50046712, dc_power=-6014)
2024-10-09 14:40:50,532 - {modules.common.component_context:26} - {DEBUG:component1} - Update Komponente ['Siemens Speicher']
2024-10-09 14:40:50,534 - {modules.common.component_context:26} - {DEBUG:component4} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,535 - {modules.common.store._api:31} - {INFO:component1} - Saving BatState(imported=60526742.58004458, exported=21132538022.18182, power=1129, soc=93)
2024-10-09 14:40:50,539 - {modules.common.component_context:26} - {DEBUG:component5} - Update Komponente ['Sma Sunny Boy/Tripower Wechselrichter']
2024-10-09 14:40:50,541 - {modules.common.store._api:26} - {DEBUG:component4} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-2940, exported=21128615, dc_power=None)
2024-10-09 14:40:50,542 - {modules.common.component_context:26} - {DEBUG:update values cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:50,548 - {modules.common.store._api:26} - {DEBUG:component5} - Raw data InverterState(currents=[0.0, 0.0, 0.0], power=-5837, exported=50046712, dc_power=None)
2024-10-09 14:40:50,566 - {modules.common.store._api:31} - {INFO:component5} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-5837, exported=50046712, dc_power=None)
2024-10-09 14:40:50,561 - {modules.common.store._api:31} - {INFO:component4} - Saving InverterState(currents=[0.0, 0.0, 0.0], power=-2940, exported=21128615, dc_power=None)
2024-10-09 14:40:50,741 - {modules.common.component_context:26} - {DEBUG:component0} - Update Komponente ['Siemens Zähler']
2024-10-09 14:40:50,742 - {modules.common.store._api:31} - {INFO:component0} - Saving CounterState(currents=[0.0, 0.0, 0.0], powers=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], imported=257687.1790548634, exported=2993980.8000658844, power=-676, frequency=50)
2024-10-09 14:40:50,889 - {control.bat_all:253} - {DEBUG:MainThread} - Damit der Speicher hochregeln kann, muss unabhängig vom eingestellten Regelmodus Einspeisung erzeugt werden.
2024-10-09 14:40:50,891 - {control.bat_all:184} - {INFO:MainThread} - -100W verbleibende Speicher-Leistung
2024-10-09 14:40:50,893 - {control.counter:148} - {INFO:MainThread} - Verbleibende Ströme an Zähler 0: [64.78999999999999, 35.14, 34.86]A
2024-10-09 14:40:50,895 - {control.counter:171} - {INFO:MainThread} - Verbleibende Leistung an Zähler 0: 31338.07W
2024-10-09 14:40:50,897 - {control.chargepoint.chargepoint:540} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3
2024-10-09 14:40:50,898 - {control.chargepoint.chargepoint:523} - {DEBUG:MainThread} - Phasenzahl Lademodus: 1
2024-10-09 14:40:50,901 - {control.chargepoint.chargepoint:698} - {INFO:MainThread} - LP 6, EV: Zoe (EV-Nr.2): Theoretisch benötigter Strom 9A, Lademodus pv_charging, Submodus: Chargemode.PV_CHARGING, Phasen: 1, Priorität: False, max. Ist-Strom: 29.79
2024-10-09 14:40:50,904 - {modules.common.simcount._simcount:42} - {DEBUG:MainThread} - Previous state: SimCounterState(timestamp=1728477641.437256, power=507.9200000000001, imported=21276558716.566677, exported=56761281.245768055)
2024-10-09 14:40:50,905 - {modules.common.simcount._calculate:11} - {DEBUG:MainThread} - time passed: 0.00262968, power1: 507.92, power2: 250.93
2024-10-09 14:40:50,907 - {modules.common.simcount._calculate:27} - {DEBUG:MainThread} - power did not change sign. Total energy: 0.997767
2024-10-09 14:40:50,907 - {modules.common.simcount._simcount:65} - {DEBUG:MainThread} - imported: 0.997767 Wh, exported: 0 Wh, new state: SimCounterState(timestamp=1728477650.9041104, power=250.9300000000003, imported=21276558717.564445, exported=56761281.245768055)
2024-10-09 14:40:50,916 - {control.data:266} - {INFO:MainThread} - bat1
BatData(get=Get(currents=[0.0, 0.0, 0.0], soc=93, daily_exported=1368.0, daily_imported=10713.0, imported=60526742.58, exported=21132538022.18, fault_state=0, fault_str='Kein Fehler.', power=1129))
2024-10-09 14:40:50,918 - {control.data:236} - {INFO:MainThread} - bat_all_data
BatAllData(config=Config(configured=True), get=Get(soc=93, daily_exported=1368.0, daily_imported=10713.0, fault_str='Kein Fehler.', fault_state=0, imported=60526742.58, exported=21132538022.18, power=1129), set=Set(charging_power_left=-100, regulate_up=True))
2024-10-09 14:40:50,920 - {control.data:237} - {INFO:MainThread} - cp_all_data
AllChargepointData(get=AllGet(daily_imported=11612.0, daily_exported=0.0, power=6662.07, imported=5793790.53, exported=0))
2024-10-09 14:40:50,924 - {control.data:266} - {INFO:MainThread} - cp6
ChargepointData(control_parameter=ControlParameter(chargemode=<Chargemode.PV_CHARGING: 'pv_charging'>, current_plan=None, failed_phase_switches=0, imported_at_plan_start=None, imported_instant_charging=None, limit=None, min_current=9, phases=1, prio=False, required_current=9, required_currents=[9, 0.0, 0.0], state=1, submode=<Chargemode.PV_CHARGING: 'pv_charging'>, timestamp_auto_phase_switch=1728477641.5459, timestamp_charge_start=None, timestamp_perform_phase_switch=None, timestamp_switch_on_off=None), get=Get(charge_state=True, charging_current=0, charging_power=0, charging_voltage=0, connected_vehicle=ConnectedVehicle(config=ConnectedConfig(average_consumption=17, charge_template=0, chargemode='stop', current_plan=0, ev_template=0, priority=False, time_charging_in_use=False), info=ConnectedInfo(id=0, name='Ladepunkt'), soc=42.0), currents=[29.79, 0.14, -0.14], daily_imported=11612.0, daily_exported=0.0, error_timestamp=None, evse_current=32, exported=0, fault_str='Kein Fehler.', fault_state=0, imported=5793790.53, phases_in_use=1, plug_state=True, power=6662.07, rfid_timestamp=None, rfid=None, serial_number='20202995', soc=None, soc_timestamp=None, state_str=None, vehicle_id=None, voltages=[223.91, 234.3, 230.76]), set=Set(charging_ev=2, charging_ev_prev=2, current=32, energy_to_charge=0, loadmanagement_available=True, log=Log(chargemode_log_entry='pv_charging', costs=0, imported_at_mode_switch=5792566.89, imported_at_plugtime=5785844.73, imported_since_mode_switch=1204.1100000003353, imported_since_plugged=7926.269999999553, range_charged=7.083000000001973, time_charged='0:16', timestamp_start_charging=1728476680.96662, ev=2, prio=False, rfid=None, serial_number=None, soc_at_start=39.0, soc_at_end=None, range_at_start=113.0, range_at_end=None), manual_lock=False, phases_to_use=1, plug_state_prev=True, plug_time=1728470621.179613, required_power=2070.0, rfid=None, target_current=0, charging_ev_data=<control.ev.Ev object at 0x6c1de670>), config=Config(configuration={'mode': 'series', 'ip_address': 'localhost', 'duo_num': 0}, ev=2, name='Interne openWB', type='internal_openwb', template=0, connected_phases=3, phase_1=1, auto_phase_switch_hw=True, control_pilot_interruption_hw=True, id=6))
2024-10-09 14:40:50,927 - {control.data:266} - {INFO:MainThread} - cpt0
CpTemplateData(autolock=Autolock(active=False, plans={}, wait_for_charging_end=False), charging_type='AC', id=0, max_current_multi_phases=32, max_current_single_phase=32, dc_max_current=435, name='Standard Ladepunkt-Profil', disable_after_unplug=False, valid_tags=[])
2024-10-09 14:40:50,930 - {control.data:266} - {INFO:MainThread} - counter0
CounterData(config=Config(max_currents=[35, 35, 35], max_total_power=24000), get=Get(powers=[0.0, 0.0, 0.0], currents=[0.0, 0.0, 0.0], voltages=[230.0, 230.0, 230.0], power_factors=[0.0, 0.0, 0.0], frequency=50, daily_exported=5298.0, daily_imported=1841.0, imported=257687.1790548634, exported=2993980.8000658844, fault_state=0, fault_str='Kein Fehler.', power=-676), set=Set(error_counter=0, reserved_surplus=0, released_surplus=0.0, raw_power_left=31338.07, raw_currents_left=[64.78999999999999, 35.14, 34.86], surplus_power_left=0))
2024-10-09 14:40:50,932 - {control.data:241} - {INFO:MainThread} - counter_all_data
CounterAllData(config=Config(home_consumption_source_id=None, consider_less_charging=False), get=Get(hierarchy=[{'id': 0, 'type': 'counter', 'children': [{'id': 1, 'type': 'bat', 'children': []}, {'id': 4, 'type': 'inverter', 'children': []}, {'id': 5, 'type': 'inverter', 'children': []}, {'id': 6, 'type': 'cp', 'children': []}]}]), set=Set(loadmanagement_active=False, home_consumption=250.9300000000003, smarthome_power_excluded_from_home_consumption=59, invalid_home_consumption=0, daily_yield_home_consumption=6311.0, imported_home_consumption=21276558717.564445, disengageable_smarthome_power=0))
2024-10-09 14:40:50,937 - {control.data:266} - {INFO:MainThread} - ct0
ChargeTemplateData(name='Standard-Lade-Profil', prio=False, load_default=False, et=Et(active=False, max_price=0.0002), time_charging=TimeCharging(active=False, plans={}), chargemode=Chargemode(selected='pv_charging', pv_charging=PvCharging(dc_min_current=145, dc_min_soc_current=145, min_soc_current=9, min_current=0, feed_in_limit=False, min_soc=0, max_soc=101), scheduled_charging=ScheduledCharging(plans={}), instant_charging=InstantCharging(current=32, dc_current=145, limit=Limit(selected='soc', amount=1000, soc=50))))
2024-10-09 14:40:50,939 - {control.data:266} - {INFO:MainThread} - ev0
EvData(set=Set(soc_error_counter=2429), charge_template=0, ev_template=0, name='Standard-Fahrzeug', tag_id=[], get=Get(soc=0, soc_timestamp=1728474442.654738, force_soc_update=False, range=0, fault_state=2, fault_str='HTTP 503: Server-Fehler. Versuche es später erneut.'))
2024-10-09 14:40:50,940 - {control.data:266} - {INFO:MainThread} - ev2
EvData(set=Set(soc_error_counter=0), charge_template=0, ev_template=0, name='Zoe', tag_id=[], get=Get(soc=42.0, soc_timestamp=1728477596.931842, force_soc_update=False, range=124.0, fault_state=0, fault_str='Kein Fehler.'))
2024-10-09 14:40:50,941 - {control.data:266} - {INFO:MainThread} - et0
EvTemplateData(dc_min_current=0, dc_max_current=0, name='Standard-Fahrzeug-Profil', max_current_multi_phases=32, max_phases=3, phase_switch_pause=10, prevent_phase_switch=False, prevent_charge_stop=False, control_pilot_interruption=True, control_pilot_interruption_duration=5, average_consump=17000, min_current=9, max_current_single_phase=32, battery_capacity=40000, efficiency=90, nominal_difference=4, keep_charge_active_duration=40)
2024-10-09 14:40:50,943 - {control.data:245} - {INFO:MainThread} - general_data
GeneralData(chargemode_config=ChargemodeConfig(instant_charging=InstantCharging(phases_to_use=3), phase_switch_delay=6, pv_charging=PvCharging(bat_power_reserve=200, bat_power_reserve_active=True, control_range=[-230, 0], feed_in_yield=0, phase_switch_delay=7, phases_to_use=0, bat_power_discharge=1000, bat_power_discharge_active=True, min_bat_soc=64, bat_mode='bat_mode', switch_off_delay=120, switch_off_threshold=100, switch_on_delay=30, switch_on_threshold=1400), retry_failed_phase_switches=True, scheduled_charging=ScheduledCharging(phases_to_use=0, phases_to_use_pv=0), time_charging=TimeCharging(phases_to_use=3), unbalanced_load_limit=18, unbalanced_load=False), control_interval=10, extern_display_mode='primary', extern=False, external_buttons_hw=False, grid_protection_active=False, grid_protection_configured=True, grid_protection_random_stop=0, grid_protection_timestamp=None, http_api=False, mqtt_bridge=False, prices=Prices(bat=0.0002, cp=0, grid=0.0003, pv=0.00015), range_unit='km', ripple_control_receiver=RippleControlReceiver(get=RippleControlReceiverGet(fault_state=0, fault_str='Kein Fehler.', override_value=100), module=None, override_reference=<OverrideReference.CHARGEPOINT: 'chargepoint'>))
2024-10-09 14:40:50,943 - {control.data:246} - {INFO:MainThread} - general_data-display
primary
2024-10-09 14:40:50,946 - {control.data:247} - {INFO:MainThread} - graph_data
GraphData(config=Config(duration=120))
2024-10-09 14:40:50,948 - {control.data:248} - {INFO:MainThread} - optional_data
OptionalData(et=Et(get=EtGet(fault_state=0, fault_str='Kein Fehler.', prices={})), int_display=InternalDisplay(active=True, on_if_plugged_in=True, pin_active=False, pin_code='0000', standby=60, theme=<modules.display_themes.cards.config.CardsDisplayTheme object at 0x6c082640>), led=Led(active=False), rfid=Rfid(active=False), dc_charging=False)
2024-10-09 14:40:50,950 - {control.data:266} - {INFO:MainThread} - pv4
PvData(config=Config(max_ac_out=0), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=15963.0, monthly_exported=89431, yearly_exported=2575385, exported=21128615, fault_state=0, fault_str='Kein Fehler.', power=-2940))
2024-10-09 14:40:50,951 - {control.data:266} - {INFO:MainThread} - pv5
PvData(config=Config(max_ac_out=0), get=Get(currents=[0.0, 0.0, 0.0], daily_exported=26244.0, monthly_exported=144805, yearly_exported=3707661, exported=50046712, fault_state=0, fault_str='Kein Fehler.', power=-5837))
2024-10-09 14:40:50,952 - {control.data:250} - {INFO:MainThread} - pv_all_data
PvAllData(config=Config(configured=True), get=Get(daily_exported=42207.0, fault_str='Kein Fehler.', fault_state=0, monthly_exported=234236, yearly_exported=6283046, exported=71175327, power=-8777))
2024-10-09 14:40:50,954 - {control.data:266} - {INFO:MainThread} - system
{'update_in_progress': False, 'perform_update': False, 'backup_cloud': {'backup_before_update': True}, 'ip_address': '192.168.178.114', 'current_commit': '2024-10-02 07:56:51 +0200 [b804bed00]', 'current_branch': 'master', 'current_branch_commit': '2024-10-02 07:56:51 +0200 [b804bed00]', 'current_missing_commits': [], 'dataprotection_acknowledged': True, 'datastore_version': 61, 'usage_terms_acknowledged': True, 'debug_level': 10, 'release_train': 'master', 'version': '2.1.6-Alpha.1', 'boot_done': True, 'lastlivevaluesJson': {'timestamp': 1728477641, 'time': '14:40:41', 'grid': -1.114, 'house-power': 0.508, 'charging-all': 6.417, 'pv-all': 9.226, 'cp6-power': 6.417, 'ev0-soc': 0, 'ev2-soc': 42.0, 'bat-all-power': 1.128, 'bat-all-soc': 93}, 'installAssistantDone': True, 'serial_number': None, 'module_update_completed': True}
2024-10-09 14:40:50,955 - {control.data:279} - {INFO:MainThread} - device2
{'name': 'Siemens', 'type': 'siemens', 'vendor': 'siemens', 'id': 2, 'configuration': {'modbus_id': 1, 'ip_address': '192.168.178.88', 'port': 502}}
2024-10-09 14:40:50,957 - {control.data:281} - {INFO:MainThread} - component0
{'name': 'Siemens Zähler', 'info': {'manufacturer': None, 'model': None}, 'type': 'counter', 'id': 0, 'configuration': {}}
2024-10-09 14:40:50,961 - {control.data:281} - {INFO:MainThread} - component1
{'name': 'Siemens Speicher', 'info': {'manufacturer': None, 'model': None}, 'type': 'bat', 'id': 1, 'configuration': {}}
2024-10-09 14:40:50,962 - {control.data:279} - {INFO:MainThread} - device3
{'name': 'SMA Sunny Boy/Tripower', 'type': 'sma_sunny_boy', 'vendor': 'sma', 'id': 3, 'configuration': {'ip_address': '192.168.178.180', 'port': 502}}
2024-10-09 14:40:50,963 - {control.data:281} - {INFO:MainThread} - component4
{'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'info': {'manufacturer': None, 'model': None}, 'type': 'inverter', 'id': 4, 'configuration': {'hybrid': False, 'version': 0, 'modbus_id': 3}}
2024-10-09 14:40:50,965 - {control.data:279} - {INFO:MainThread} - device4
{'name': 'SMA Sunny Boy/Tripower', 'type': 'sma_sunny_boy', 'vendor': 'sma', 'id': 4, 'configuration': {'ip_address': '192.168.178.57', 'port': 502}}
2024-10-09 14:40:50,968 - {control.data:281} - {INFO:MainThread} - component5
{'name': 'Sma Sunny Boy/Tripower Wechselrichter', 'info': {'manufacturer': None, 'model': None}, 'type': 'inverter', 'id': 5, 'configuration': {'hybrid': False, 'version': 0, 'modbus_id': 3}}
2024-10-09 14:40:50,969 - {control.data:253} - {INFO:MainThread} - 

2024-10-09 14:40:50,970 - {control.algorithm.algorithm:25} - {INFO:MainThread} - # Algorithmus
2024-10-09 14:40:50,971 - {control.algorithm.algorithm:63} - {DEBUG:MainThread} - Ladepunkt 6: Prüfen, ob Phasenumschaltung durchgeführt werden soll.
2024-10-09 14:40:50,972 - {control.chargepoint.chargepoint:540} - {DEBUG:MainThread} - EV-Phasenzahl beschränkt die nutzbaren Phasen auf 3
2024-10-09 14:40:50,973 - {control.ev:499} - {DEBUG:MainThread} - Genutzter Strom: 29.79A, Überschuss: 576.0W, benötigte neue Leistung: -1150W
2024-10-09 14:40:50,974 - {control.ev:546} - {INFO:MainThread} - LP 6: Umschaltung von 1 auf 3 Phasen in 5 Min. 50 Sek..
2024-10-09 14:40:50,976 - {control.algorithm.algorithm:30} - {INFO:MainThread} - **Mindestrom setzen**
2024-10-09 14:40:50,979 - {control.algorithm.min_current:20} - {INFO:MainThread} - Mode-Tuple Chargemode.PV_CHARGING - Chargemode.PV_CHARGING - False, Zähler 0
2024-10-09 14:40:50,980 - {control.counter:179} - {DEBUG:MainThread} - Zähler 0: [55.78999999999999, 35.14, 34.86]A verbleibende Ströme, 29268.07W verbleibende Leistung
2024-10-09 14:40:50,981 - {control.algorithm.common:99} - {INFO:MainThread} - LP6: Stromstärke 9A
2024-10-09 14:40:50,983 - {control.algorithm.algorithm:32} - {INFO:MainThread} - **Soll-Strom setzen**
2024-10-09 14:40:50,986 - {control.counter:500} - {DEBUG:MainThread} - Zähler 0: Begrenzung der verbleibenden Leistung auf 5168.07W
2024-10-09 14:40:50,986 - {control.algorithm.algorithm:38} - {INFO:MainThread} - **PV-geführten Strom setzen**
2024-10-09 14:40:50,989 - {control.algorithm.filter_chargepoints:102} - {DEBUG:MainThread} - Geordnete Ladepunkte [6]
2024-10-09 14:40:50,990 - {control.algorithm.surplus_controlled:45} - {INFO:MainThread} - Mode-Tuple Chargemode.PV_CHARGING - Chargemode.PV_CHARGING - False, Zähler 0
2024-10-09 14:40:50,992 - {control.loadmanagement:82} - {DEBUG:MainThread} - Leistungsüberschreitung auf 5168.07W korrigieren: [23.0, 0.0, 0.0]
2024-10-09 14:40:50,994 - {control.algorithm.surplus_controlled:123} - {DEBUG:MainThread} - Ungenutzten Soll-Strom aufschlagen ergibt 1.9998695652173915A.
2024-10-09 14:40:50,995 - {control.algorithm.common:99} - {INFO:MainThread} - LP6: Stromstärke 1.9998695652173915A
2024-10-09 14:40:50,996 - {control.process:24} - {INFO:MainThread} - # Ladung starten.
2024-10-09 14:40:51,000 - {control.chargepoint.chargepoint:84} - {INFO:MainThread} - LP 6: Die Einstellungen in dem Fahrzeug-Profil beschränken den Strom auf mindestens 9 A.
2024-10-09 14:40:51,002 - {control.process:99} - {INFO:MainThread} - LP6: set current 9 A, state PHASE_SWITCH_DELAY
2024-10-09 14:40:51,004 - {modules.common.component_context:26} - {DEBUG:set current cp6} - Update Komponente ['Ladepunkt']
2024-10-09 14:40:51,464 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/bat/get/imported, Payload 60526742.58, vorherige Payload: 60526739.63
2024-10-09 14:40:51,473 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/bat/get/power, Payload 1129, vorherige Payload: 1128
2024-10-09 14:40:51,490 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/get/power, Payload 6662.07, vorherige Payload: 6417.08
2024-10-09 14:40:51,503 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/get/imported, Payload 5793790.53, vorherige Payload: 5793771.0
2024-10-09 14:40:51,508 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/home_consumption, Payload 250.9300000000003, vorherige Payload: 507.9200000000001
2024-10-09 14:40:51,517 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/counter/set/imported_home_consumption, Payload 21276558717.564445, vorherige Payload: 21276558716.566677
2024-10-09 14:40:51,523 - {helpermodules.changed_values_handler:126} - {DEBUG:MainThread} - Topic openWB/set/chargepoint/6/control_parameter/limit, Payload , da die maximale Leistung an Zähler {} erreicht ist., vorherige Payload: None
2024-10-09 14:40:53,537 - {helpermodules.command:126} - {DEBUG:Commands} - Befehl: {'command': 'getDailyLog', 'data': {'day': '20241009'}}, Connection-ID: ecztvg
2024-10-09 14:40:55,608 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-10-09 14:40:59,065 - {modules.update_soc:121} - {DEBUG:SoC} - 3 soc_from_cp: None, timestamp_soc_from_cp: None
2024-10-09 14:40:59,066 - {modules.update_soc:111} - {DEBUG:SoC} - 2 soc_from_cp: None, timestamp_soc_from_cp: None
2024-10-09 14:41:00,631 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=smarthome_handler, args=(), kwargs={})
2024-10-09 14:41:00,632 - {helpermodules.utils._thread_handler:40} - {ERROR:MainThread} - Thread smarthome ist bereits aktiv und wird nicht erneut gestartet.
2024-10-09 14:41:00,633 - {schedule:660} - {DEBUG:MainThread} - Running job Job(interval=1, unit=minutes, do=handler10Sec, args=(), kwargs={})
2024-10-09 14:41:00,633 - {root:76} - {INFO:MainThread} - # ***Start***
Bitte ein Ticket öffnen, ich muss mir das per Remotesupport ansehen.
Nach oben
Jens
Beiträge: 146
Registriert: Fr Jul 16, 2021 6:19 pm

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von Jens »

LenaK hat geschrieben: ↑Mi Okt 09, 2024 1:27 pm
Jens hat geschrieben: ↑Di Okt 08, 2024 2:27 pm Installierte Version: 2024-10-08 15:16:06 +0200 [b01c6e34c]

Habe Zielladen 100% bis morgen 5:59 Uhr eingestellt-
Derzeit wird -trotz- erhötem Preis geladen.

Warum ?

Main Log:
https://paste.openwb.de/3GqX50KCkeFmH8K


Warum laden.jpg
Du musst im Ladeprofil aktivieren, dass strompreisbasiert geladen werden soll.
Ich lade mit Tibber preisgünstigst bis zum Zeitraum 5:59 Uhr. Bisher bin ich davon ausgegangen, dass strompreisbasierendes Laden bei "Sofortladen" eingestellt werden muss. --> Wenn der eingestellt Preis unterschritten wird dann sofort geladen. (Hat bisher zumindest so immer funktioniert)

Zielladen hat heute Nacht "ohne die Einstellung strompreisbasierndes Laden" auch perfekt funktioniert. (unten Bild)
--> Heist dass, dass bei Einstellung strompreisbasierendes Laden in Verbindung mit Zielladen der eingestellte Preis ignoriert wird ? (Sorry, verstehe das gerade nicht)
Zielladen ohne Einstellung preisbasierendes Laden.jpg
Zielladen ohne Einstellung preisbasierendes Laden.jpg (57.27 KiB) 534 mal betrachtet
PV: 9,86kWp an E3DC S10 13kWh
LP1: openWB Series2 standard+
Kia EV6
Nutzung von Tibber
Nach oben
LenaK
Beiträge: 1310
Registriert: Fr Jan 22, 2021 6:40 am
Been thanked: 16 times

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von LenaK »

Jens hat geschrieben: ↑Mi Okt 09, 2024 2:54 pm
LenaK hat geschrieben: ↑Mi Okt 09, 2024 1:27 pm
Jens hat geschrieben: ↑Di Okt 08, 2024 2:27 pm Installierte Version: 2024-10-08 15:16:06 +0200 [b01c6e34c]

Habe Zielladen 100% bis morgen 5:59 Uhr eingestellt-
Derzeit wird -trotz- erhötem Preis geladen.

Warum ?

Main Log:
https://paste.openwb.de/3GqX50KCkeFmH8K


Warum laden.jpg
Du musst im Ladeprofil aktivieren, dass strompreisbasiert geladen werden soll.
Ich lade mit Tibber preisgünstigst bis zum Zeitraum 5:59 Uhr. Bisher bin ich davon ausgegangen, dass strompreisbasierendes Laden bei "Sofortladen" eingestellt werden muss. --> Wenn der eingestellt Preis unterschritten wird dann sofort geladen. (Hat bisher zumindest so immer funktioniert)

Zielladen hat heute Nacht "ohne die Einstellung strompreisbasierndes Laden" auch perfekt funktioniert. (unten Bild)
--> Heist dass, dass bei Einstellung strompreisbasierendes Laden in Verbindung mit Zielladen der eingestellte Preis ignoriert wird ? (Sorry, verstehe das gerade nicht)

Zielladen ohne Einstellung preisbasierendes Laden.jpg
Im Ladeprofil des Fahrzeugs muss das strompreisbasierte Laden aktiviert werden. Die Berücksichtigung des Strompreises in den verschiedenen Lademodi erfolgt folgendermaßen:

Sofort- und Zeitladen: Es wird nur geladen, wenn der Strompreis unter dem maximalen angegeben Strompreis liegt.
Zielladen: Es wird die Ladedauer ermittelt und dann zu den günstigsten Stunden geladen.
PV-Laden: keine Berücksichtigung des Strompreises
Nach oben
Jens
Beiträge: 146
Registriert: Fr Jul 16, 2021 6:19 pm

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von Jens »

LenaK hat geschrieben: ↑Do Okt 10, 2024 5:59 am
Jens hat geschrieben: ↑Mi Okt 09, 2024 2:54 pm
LenaK hat geschrieben: ↑Mi Okt 09, 2024 1:27 pm

Du musst im Ladeprofil aktivieren, dass strompreisbasiert geladen werden soll.
Ich lade mit Tibber preisgünstigst bis zum Zeitraum 5:59 Uhr. Bisher bin ich davon ausgegangen, dass strompreisbasierendes Laden bei "Sofortladen" eingestellt werden muss. --> Wenn der eingestellt Preis unterschritten wird dann sofort geladen. (Hat bisher zumindest so immer funktioniert)

Zielladen hat heute Nacht "ohne die Einstellung strompreisbasierndes Laden" auch perfekt funktioniert. (unten Bild)
--> Heist dass, dass bei Einstellung strompreisbasierendes Laden in Verbindung mit Zielladen der eingestellte Preis ignoriert wird ? (Sorry, verstehe das gerade nicht)

Zielladen ohne Einstellung preisbasierendes Laden.jpg
Im Ladeprofil des Fahrzeugs muss das strompreisbasierte Laden aktiviert werden. Die Berücksichtigung des Strompreises in den verschiedenen Lademodi erfolgt folgendermaßen:

Sofort- und Zeitladen: Es wird nur geladen, wenn der Strompreis unter dem maximalen angegeben Strompreis liegt.
Zielladen: Es wird die Ladedauer ermittelt und dann zu den günstigsten Stunden geladen.
PV-Laden: keine Berücksichtigung des Strompreises
OK, danke nochmal für die Erklärung !
PV: 9,86kWp an E3DC S10 13kWh
LP1: openWB Series2 standard+
Kia EV6
Nutzung von Tibber
Nach oben
triotech
Beiträge: 35
Registriert: Mi Nov 04, 2020 12:49 pm

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von triotech »

Ich habe gerade mein openWB geupdatet danach bootet sie nicht mehr komplett durch.
Sie hängt im Bootbildschirm.
Einen hard- und softreboot habe ich bereits durchgeführt.
Per ssh habe ich noch zugriff.

Code: Alles auswählen

Lade Einstellungen...
Topic: openWB/system/version Payload: "2.1.6-Alpha.1"
Topic: openWB/system/boot_done Payload: false
Topic: openWB/system/update_in_progress Payload: false
Topic: openWB/system/usage_terms_acknowledged Payload: true
Topic: openWB/general/extern Payload: false
Topic: openWB/general/web_theme Payload: {"name": "Standard (alt)", "type": "standard_legacy", "configuration": {}, "official": true}
backend still booting
Topic: openWB/internal_chargepoint/0/data/parent_cp Payload: null
backend still booting
Topic: openWB/internal_chargepoint/1/data/parent_cp Payload: null
backend still booting

Code: Alles auswählen

grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 144 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:28: boot done :-)
2024-10-10 09:25:28,525 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:28,525 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:28,530 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 551 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:29: boot done :-)
2024-10-10 09:25:29,848 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:29,848 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:29,853 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 782 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:30: boot done :-)
2024-10-10 09:25:30,925 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:30,925 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:30,930 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 1012 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:32: boot done :-)
2024-10-10 09:25:32,563 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:32,563 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:32,573 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 1242 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:33: boot done :-)
2024-10-10 09:25:34,024 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:34,024 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:34,031 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
Hat jemand eine Idee woran es liegen könnte?
Nach oben
LenaK
Beiträge: 1310
Registriert: Fr Jan 22, 2021 6:40 am
Been thanked: 16 times

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von LenaK »

triotech hat geschrieben: ↑Do Okt 10, 2024 7:47 am Ich habe gerade mein openWB geupdatet danach bootet sie nicht mehr komplett durch.
Sie hängt im Bootbildschirm.
Einen hard- und softreboot habe ich bereits durchgeführt.
Per ssh habe ich noch zugriff.

Code: Alles auswählen

Lade Einstellungen...
Topic: openWB/system/version Payload: "2.1.6-Alpha.1"
Topic: openWB/system/boot_done Payload: false
Topic: openWB/system/update_in_progress Payload: false
Topic: openWB/system/usage_terms_acknowledged Payload: true
Topic: openWB/general/extern Payload: false
Topic: openWB/general/web_theme Payload: {"name": "Standard (alt)", "type": "standard_legacy", "configuration": {}, "official": true}
backend still booting
Topic: openWB/internal_chargepoint/0/data/parent_cp Payload: null
backend still booting
Topic: openWB/internal_chargepoint/1/data/parent_cp Payload: null
backend still booting

Code: Alles auswählen

grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 144 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:28: boot done :-)
2024-10-10 09:25:28,525 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:28,525 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:28,530 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 551 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:29: boot done :-)
2024-10-10 09:25:29,848 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:29,848 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:29,853 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 782 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:30: boot done :-)
2024-10-10 09:25:30,925 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:30,925 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:30,930 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 1012 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:32: boot done :-)
2024-10-10 09:25:32,563 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:32,563 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:32,573 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
grep: /etc/rc.local.bak: No such file or directory
rc.local bug not found
no factory reset pending, normal startup
atreboot.sh started
checking init in /boot/config.txt...
watchdog for atreboot.sh on pid 1242 started, waiting for 900s
already up to date
checking ramdisk settings in /etc/fstab...
already up to date
Group membership...
required group 'gpio' missing on this system!
Final group membership: openwb : openwb dialout sudo input
Network...
Wait for connection...
my primary IP: 192.168.0.55
my primary interface: eth0
running as primary, enabling plug'n'play network
sudo: ifconfig: command not found
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
#### continue anyway...
apt configuration already up to date
no internet connection, skipping package installation
openwb.cron already up to date
openwb2.service definition is already a symlink
openwbRemoteSupport.service already up to date
no restore pending, normal startup
cleaning obsolete python cache folders...
python cache cleanup done
'tvservice' not found, assuming a display is present
displayDetected: true
display setup...
autologin configured
mouse cursor configured
lxde session autostart already configured
checking required apache modules...
module 'headers' already enabled
module 'ssl' already enabled
module 'proxy_wstunnel' already enabled
apache default site...
/etc/apache2/sites-available/000-default.conf is up to date
apache default ssl site...
/etc/apache2/sites-available/apache-openwb-ssl.conf is up to date
apache http api ssl site...
/etc/apache2/sites-available/http-api-ssl.conf is up to date
site 'default-ssl' already disabled
site 'apache-openwb-ssl' already enabled
http api is disabled
site 'http-api-ssl' already disabled
apache configuration is already up to date
check mosquitto installation...
mosquitto.conf already up to date
mosquitto openwb.conf already up to date
mosquitto acl already up to date
mosquitto_local service definition already up to date
mosquitto_local.conf already up to date
mosquitto openwb_local.conf already up to date
mosquitto done
no internet connection, skipping python package installation
no internet connection, skipping version update
chgrp: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chgrp: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/restore/*': No such file or directory
chmod: cannot access '/var/www/html/openWB/data/data_migration/*': No such file or directory
2024-10-10 09:25:33: boot done :-)
2024-10-10 09:25:34,024 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:16} - {INFO:MainThread} - failed to import RPi.GPIO! maybe we are not running on a pi
2024-10-10 09:25:34,024 - {modules.ripple_control_receivers.gpio.ripple_control_receiver:17} - {WARNING:MainThread} - RSE disabled!
2024-10-10 09:25:34,031 - {helpermodules.logger:92} - {ERROR:MainThread} - Uncaught exception
Traceback (most recent call last):
  File "/var/www/html/openWB/packages/main.py", line 19, in <module>
    from control.chargelog.chargelog import calculate_charge_cost
  File "/var/www/html/openWB/packages/control/chargelog/chargelog.py", line 8, in <module>
    from control import data
  File "/var/www/html/openWB/packages/control/data.py", line 20, in <module>
    from helpermodules.subdata import SubData
  File "/var/www/html/openWB/packages/helpermodules/subdata.py", line 12, in <module>
    from control import bat_all, bat, counter, counter_all, ev, general, optional, pv, pv_all
  File "/var/www/html/openWB/packages/control/optional.py", line 9, in <module>
    from control.ocpp import OcppMixin
  File "/var/www/html/openWB/packages/control/ocpp.py", line 4, in <module>
    from ocpp.v16 import call, ChargePoint as OcppChargepoint
ModuleNotFoundError: No module named 'ocpp'
Hat jemand eine Idee woran es liegen könnte?
ERROR: no internet connection!
#### network setup failed!
#### unable to update dependencies and version information
Die openWB hat kein Internet-Zugriff, um die neuen Pakete zu installieren. Wie hast Du ohne Internetzugriff das Update gemacht?
Nach oben
triotech
Beiträge: 35
Registriert: Mi Nov 04, 2020 12:49 pm

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von triotech »

das ist ja das komische. komme ganz normal ins Internet mit der Box.
- nach Updates geschaut
- Aktualisierung durchgeführt

per ssh kann ich ja auch ins Internet pingen

Code: Alles auswählen

openwb@openwb:~$ sudo ping google.com
PING google.com(fra24s04-in-x0e.1e100.net (2a00:1450:4001:827::200e)) 56 data bytes
64 bytes from fra24s04-in-x0e.1e100.net (2a00:1450:4001:827::200e): icmp_seq=1 ttl=60 time=14.9 ms
64 bytes from fra24s04-in-x0e.1e100.net (2a00:1450:4001:827::200e): icmp_seq=2 ttl=60 time=14.6 ms
64 bytes from fra24s04-in-x0e.1e100.net (2a00:1450:4001:827::200e): icmp_seq=3 ttl=60 time=14.7 ms
^C
--- google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 14.647/14.749/14.858/0.086 ms
openwb@openwb:~$
Nach oben
LutzB
Beiträge: 3781
Registriert: Di Feb 25, 2020 9:23 am
Has thanked: 4 times
Been thanked: 24 times

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von LutzB »

Was hast Du für ein Basissystem installiert?

Code: Alles auswählen

sudo: ifconfig: command not found
Davon abgesehen ist mit einem der letzten PRs zu OCPP anscheinend ein Bug reingekommen, der den Start des Dienstes verhindert. Wir arbeiten an einer Lösung.
Nach oben
triotech
Beiträge: 35
Registriert: Mi Nov 04, 2020 12:49 pm

Re: Rückmeldungen openWB software 2.1.6 Alpha 1

Beitrag von triotech »

LutzB hat geschrieben: ↑Do Okt 10, 2024 9:26 am Was hast Du für ein Basissystem installiert?

Linux 11 "bullseye" in einem Proxmox Container

Code: Alles auswählen

sudo: ifconfig: command not found
Davon abgesehen ist mit einem der letzten PRs zu OCPP anscheinend ein Bug reingekommen, der den Start des Dienstes verhindert. Wir arbeiten an einer Lösung.
Nach oben
Gesperrt

Zurück zu „Software 2.x“